tylerbrown
03-01-2007, 06:18 PM
I am consolidating all of this stuff to give me some working room. open to offers on all stuff.
1978 F-150 Custom standard truck cab Very little body rust, dent in passenger door. no seat but almost all interior. Tan, i have all of the grill and headlights inside of it. Body is pretty much straight but floorpans are gone. $100
351 Modified Block
Great condition just needs honed
351m 2 barrel heads and and all parts for complete motor $100
81 F-150 extended ibeam suspension for 2wd. will mount to anything that wants to be jumped hard this includes all of the steering linkages for a ford steering box. lots of good parts like heims and tubing. The radius arms are pretty long so it might work for extended arms $75
passenger side Mark williams racing 35 spline axle shaft for stock width 9". These things are beefy and heavy. it took 750 hp and 80 mph to break the drivers side. it was $600 new $100
Edelbrock high volume fuel pump model hp 37 310L and holley fuel pressure regulator for small block chevy $40
351m Intake and exhust manifolds $25
Nitrogen pressurized bump stops $25
Rear disk brake setup for 9" which includes mounts, calipers, pads, and 10" drilled rotors $75
Air conditioning compressor for early 302 great for onboard air setup includes all brackets to mount. $50
Motorcraft 2bbl for 351 just rebuilt $40
I am open for any trades or offers so just pm me.
Items are in knoxville tn
1978 F-150 Custom standard truck cab Very little body rust, dent in passenger door. no seat but almost all interior. Tan, i have all of the grill and headlights inside of it. Body is pretty much straight but floorpans are gone. $100
351 Modified Block
Great condition just needs honed
351m 2 barrel heads and and all parts for complete motor $100
81 F-150 extended ibeam suspension for 2wd. will mount to anything that wants to be jumped hard this includes all of the steering linkages for a ford steering box. lots of good parts like heims and tubing. The radius arms are pretty long so it might work for extended arms $75
passenger side Mark williams racing 35 spline axle shaft for stock width 9". These things are beefy and heavy. it took 750 hp and 80 mph to break the drivers side. it was $600 new $100
Edelbrock high volume fuel pump model hp 37 310L and holley fuel pressure regulator for small block chevy $40
351m Intake and exhust manifolds $25
Nitrogen pressurized bump stops $25
Rear disk brake setup for 9" which includes mounts, calipers, pads, and 10" drilled rotors $75
Air conditioning compressor for early 302 great for onboard air setup includes all brackets to mount. $50
Motorcraft 2bbl for 351 just rebuilt $40
I am open for any trades or offers so just pm me.
Items are in knoxville tn