|
muddy_xj 03-04-2007, 10:31 AM Well I picked up a older M8000 for cheap recently, only problem, the wiring is not connected. Its the older style with a 3 solenoid control box. My question is where do the wires from the 3 terminals on the motor (A,F1 and F2) connect? Any diagrams or help is welcomed. I haven't been able to find any useful info in my searches. txapacheguy 03-04-2007, 11:19 AM This link will get you to the warn website and the current M8000 operator manual. http://www.warn.com/truck/winches/src/images/61/36138D0.pdf When I installed my new M8000 winch on my TJ a few months ago, the cables running from the solenoid box were marked with white pieces of tape where they bolted to the winch motor. I'll take pictures of my setup and show you where my wires are connected. Good luck!!! muddy_xj 03-04-2007, 11:42 AM The cables arnt hooked up to the control box so I dont know where they connect inside. I have found plenty of 4 solenoid diagrams but non for my style of control box. txapacheguy 03-04-2007, 11:49 AM Im sending you a PM. Im cant attach pics on here.... I have a pic to send you of the inside of the cable box. | |