how do you guys hold down your spare axle shafts so they dont go busting into your heads on a rollover:eek:

i give em to the bitch riding shotgun, and say hold on and dont let them hit ya in the head on a rollover:flipoff2:

Use duct tape or just wear a helmet:flipoff2:

Weld them as part of the rollcage :p

Just upgrade to chromo 60s.

Freind of mine made a "bracket" of sorts from unistrut, and used the unistrut conduit clamps around his axles.

I've never broke one so I don't bother carrying spares.

take a 5/8" x 3" or so long bolt weld to the main hoop, put a piece of rubber hose over the bolt, slide the axle with no ujoint over the bolt and rubber piece. use large washer and nylock nut to hold it there. It will also double as a grab bar for back seat passengers. Nylock because you wont have to snug it down so tight and not worry about it backing off.