My friend has a 92 YJ the he bought with a 350 Chevy and a 4-speed manual trans. The hyd line from the stock clutch master cyl to the slave cyl keeps splitting. The YJ had a 4.0L stock, if it matters.

He asked me to see if their was anyone that makes a new hose that is the correct fittings on both ends. No one in town has the fittings for the stock master cyl, but they have them for the slace cylinder.


THANKS, Todd S.

Call Advance Adapters. They have a kit that has the correct fittings on both ends and uses a braided steel hose. I used this on my LS1 swap.

I didnt think of A.A. I tried to find one a couple of places, but no luck.

Thanks, Todd S.