Well after removing about 3000 feet of wire this past weekend from my cruiser (Previous owner put in a huge painless wiring kit and left all the wires in. I could have had cruise control, a dome light, a trunk release....etc...) and I removed the wires connecting to the turn signla module on the steering column without marking them first. OOPS!!

Anybody have the wiring diagram for this part?? I wanted to drive the cruiser to work today, but the lack of brake lights and turn signals would have sucked!! :(

:)

you mean after 3 years I am actually going to have to buy a repair manual?? ;) :D Come awn!!! :D

This is what i found in my Toy repair manual, don't know if it's any help.

Christof

24v

You sir are my hero of the day!!

SWEET!

Thanks, that is EXACTLY what I was looking for. :D:D:D

The wiring in the US models is slightly different, especially in regard to the 4-way flashers or hazard lights. If all you are worried about is the connections from the turn signal switch to the bulbs, then it is the same with the same color code.

If you need the US schematic see:

http://members.cox.net/cglabe1/Photos/fj40scheme2.jpg

You can download the rest of the entire schematic at:
http://members.cox.net/cglabe1/Photos/fj40scheme1.jpg
http://members.cox.net/cglabe1/Photos/fj40scheme3.jpg

I am only posting links as these are huge files. You need to display them at higher resolution than you can see in your browser in order to read the details, so save them to disk and open them with Photoshop or other image viewer.