mudbogging101
05-02-2007, 05:42 PM
Ok here is a quick rundown it is a 76 chevy blazer"so u can register as historic and get past emissions" It has a bored and stroked 350 with a 400 crank so she is a 383 there is alot done to the motor and heads i belive the heads are polished and ported"i didn't build the motor" and she can rev to around 6000 comfortabley and if u retune the carb she will stand up on the back tires.The trans is a th350 with a shift kit,the t-case is a np208 with a 2wd conversion kit with a small reduction i belive its like a 3.1 low range.The axles are dana 44's with 31 spline shafts and 4:56 gears and lockers front and rear.The tires are 37 inch goodyear mt/r's with over half tread it has some black steel wheels.It has a custom front bumper and i have a mile marker 12000 pound winch and the bumper,lower panals on the body,and the step bars and the cab over hang "it has the big foot looking thing" and that is all rino lyned.The body has a little rust but nothing to bad at all.I just had a flowmaster exaust put on it goes from a set of long tube headerrs to a true duel exaust with 3 inch pipes all the way back.I know there is more i am missing and she is a great truck and really just need a daily driver so she has to go.I dont know what i can get for her so make me a good offer she needs to go.Or i am open to trades for a diesel pick up or a jeep cherokee.I have been hearing from my friend that she is worth around 3000 and i think that is a good price for her.Also she does have a clear title also here are some pics but they are older pics so if u have questions please ask.Ok here are some pics befor i forget http://s142.photobucket.com/albums/r106/mudboggin101/ .Thanks for looking guys.Mike