My s-10 is too stiff in the front with the fullsize bronco coil springs. I want to run the fox 2.0 pro series shocks to replace the coil/shock absorber combo. All the advertisements I have seen about them say they are pressurized 50-500 psi. Some say they are at 200 psi. I want to know if these are at all adjustable as far as spring rate is. I plan on a 350 swap soon along with a winch so it would be tits if I can adjust these after modifications.

The spring rate is adjusted by increasing or decreasing the amount of shock oil that is inside of the shock tube. The ride height is adjusted by raising and lowering the PSI of the nitrogen.

These can be adjusted at any time.

how much do they run cost wise?

thanks man.