EWong
05-30-2002, 09:50 AM
This post is here so I can find it in a fawkin search
The "main" (there are 4) bolts that connect the engine to the trans bell housing (the upper ones, the lower smaller ones are to the engine "stiffner") are
12mm x1.25 pitch
Just in case ya need to get em for mounting the engine to an engien stand.
(dunno the length required - as stands may vary)
The "main" (there are 4) bolts that connect the engine to the trans bell housing (the upper ones, the lower smaller ones are to the engine "stiffner") are
12mm x1.25 pitch
Just in case ya need to get em for mounting the engine to an engien stand.
(dunno the length required - as stands may vary)