I have found a Dana 70 rear from a 2002 Dodge (Diesel/manual trans) which totalled and I don't know if it's a 35 spline or not and the salvage yard won't let me take it apart to check.

It has 70 - 2U stamped on one of the webbs.
It has 52069459AJ on one tag.
The other tag has 606707-2 which should be the BOM.
It has 3.54 gear ratio.
It has 3.5" tubes (If this matters)

I have called several manufacturers for lockers/gears and have gotten different answers.

Does it have 35 spline 1.5" shafts or 32 spline 1.41" shafts?

Any help would be appreciated.

Ryan

I just found a dana 70 off a 1976 F350 special delux camper, I checked It has 4110 410:1 gears, but what spline count does it have. Didnt have time to pull the shaft.

Does any one know the rang of FORD years that had d70 35 spliners? I believe there was a transiton between late 70's and early 70's, and recall the late 70's having the 35 spline.


thanks guys...

Im hoping for the best of both worlds....

I want 3.54s so if your tossin them let me know

spline?:D

Count much? ;)

nope.:D

Mostly do laplace and fourier transforms, to derive analog or digital transfer functions....... counting?.... not too often.