Dana 44 High Steer Arms

[Mad4wd]

We have a couple new versions available. Long and short versions in standard 3 hole configuration and now arms with a 4th hole for use with Dedenbear Dana 44 knuckles. (Long version is for the passenger side for non crossover steering applications)

Arms are machined from billet cold rolled steel and are 1" thick. They have a 10 degree angle machined into them to offset steering joint misalignment.

Pricing:

Long Arm $80

Short Arm $70

2 Short 3 hole version arms with 6 studs, cone washers and stover nuts $170

1 Short, 1 Long (RH) 4 hole Dedenbear version Arms with 8 Studs, cone washers and stover nuts $180

2 Short 4 hole Dedenbear version Arms with 8 Studs, cone washers and stover nuts $180

1 Short, 1 Long (RH) 4 hole Dedenbear version Arms with 8 Studs, cone wshers and stover nuts $190



http://www.madmfg.com/images/dana44arms1.jpg

[ElkyRacer]

Are the D44 arms just drilled for heims? Price on 2 regular 3 hole D44 arms drilled for 1 ton TREs, shipped to 75501.

Thanks!
Kyle

[Mad4wd]

Are the D44 arms just drilled for heims? Price on 2 regular 3 hole D44 arms drilled for 1 ton TREs, shipped to 75501.

Thanks!
Kyle

We machine them for heims or tie rod ends for $20. Please call for a shipping estimate. It would be approximately $10.

Thanks,
Jeremy

[Mad4wd]

Chromoly Stud Kits now online (http://mad4wd.com/index.php?main_page=index&cPath=102)

http://www.madmfg.com/gallery2/main.php?g2_view=core.DownloadItem&g2_itemId=191&g2_serialNumber=1

[Mad4wd]

in stock ready to go! :D

http://www.madmfg.com/gallery2/main.php?g2_view=core.DownloadItem&g2_itemId=190&g2_serialNumber=2