|
JBsTrooper 05-13-2007, 03:42 PM i got a free d44 from a mid 70's scout. all studs (5 lug) on driver side are broken off. fair amount of rust on axle, and i can't get the rotor off. calipers have been removed. i'm wondering if it's the rust (weld) or if i'm missing something. any links helpful. thanks. RustoleumWhite 05-13-2007, 03:50 PM Drive whats left of the studs out of the rotor/hub assembly. The rotor should fall off then. The two parts are pinned together with the studs, not slip-over like some of the new trucks. JBsTrooper 05-13-2007, 04:16 PM Drive whats left of the studs out of the rotor/hub assembly. The rotor should fall off then. The two parts are pinned together with the studs, not slip-over like some of the new trucks. drive them out towards the diff? Rock Tractor 05-13-2007, 05:44 PM Is the rotor/hub removed from the axle? JBsTrooper 05-13-2007, 06:27 PM Is the rotor/hub removed from the axle? nope, do i have to take it off to remove the studs? Urban Wheeler 05-13-2007, 07:54 PM If all the studs are busted off then you will have to take the hub off anyway to replac them. NVScouter 05-14-2007, 08:03 AM Dead blow hammer, and some ass! Cursing helps too. | |