|
Lil'John 05-31-2002, 10:53 AM Aside from the FJ80 rear electric locker, is the bolt pattern for an electric locker the same? Or, reworded, is a Tacoma rear electric the same bolt pattern as a hi-pinion electric? TIA, John I Lean 05-31-2002, 11:34 AM I think they are the same, though I've never tried to install one in place of the other. SeaBass44 05-31-2002, 12:06 PM cheap way to find out is to get both gaskets at toyota, have them look them up, if the same # then yes without ordering them:) KLF 05-31-2002, 12:25 PM I'm not familiar with the Tacoma locker, but I DO know that the 4Runner locker and FJ-80 hi-pinion lockers are NOT the same bolt pattern. The long studs are in a different position. I have one of each gasket. But oddly enough, if you flip one of the gaskets over so it's backwards, they match up very closely. They may actually be identical mirror images, but it's too hard to say, the gaskets are too flimsy. I Lean 05-31-2002, 01:28 PM Originally posted by KLF I'm not familiar with the Tacoma locker, but I DO know that the 4Runner locker and FJ-80 hi-pinion lockers are NOT the same bolt pattern. The long studs are in a different position. I have one of each gasket. But oddly enough, if you flip one of the gaskets over so it's backwards, they match up very closely. They may actually be identical mirror images, but it's too hard to say, the gaskets are too flimsy. The Tacoma locker is the same one as the 4Runner locker. | |