just picked up a 78 bronco w/351m and no rear end. thinking of partsing it out. would it be worth it to parts or better to replace the rear?
if i parts it out what are the parts worth. i will be the 3 owner of the truck and it has been sitting for what i was told 7 years. looks pritty good for its age.
what type of front end /rear was standar for that year?
is the motor worth anything? if so how much?
trany/transfercase?
or anything else.
thanks

D44 front 9 inch rear 351M C6 tranny 205 case
stoped by and looked pretty rusty id slap some 35's on it and
kill it :flipoff2: then use the axles in your yota the 351M is ok motor but not worth much $150 bucks if it runs good tranny the
same if it works the front axle not real desired because of the cast c wedges the rear is good 9 its a later HD housing with a standard third member :usa: :usa:

throw a d60 in the rear from a f250 and some 38s on it and wheel it, i cant see it be worth much parting it out.