There is a 4 port plug on the top of the case. Does anyone know which port does what? As in vaccume input, output to front axle, ect. I do not need to use any of it. But I am not sure if the case has to have a vaccume input to allow it to shift like my Jeep does. So can I cap it all off or do I need any of it?

Long story short putting a 60 in the front of the Jeep. The 241 is a driver drop. Need a pass drop. This 208 will bolt right up to my 727 with the correct drop.

Thanks

http://memimage.cardomain.net/member_images/3/web/735000-735999/735329_337_full.jpg

Vacuum is for the CAD on the front axle. It's not needed for anything else.

I'll 2nd that, it won't be needed, just cap the vac switch hole and be done.