|
bashed4runner 06-03-2002, 08:24 AM I recently put 2" wheel spacers up front and now I have all pros 3/4" wheel spacers and want to put them in the rear. The chevy studs are differnt then the stock rears and I was wondering if anyone put a 3/4 spacer on the rear and if so what studs did you use? thanks Jeff 92xj WI 06-11-2002, 07:07 AM I just did an all pro copy 3/4" wheel spacer made of steel on my '89 Grand Waggy rear D44. The axle came with 7/16 studs, so I had to remove them and drill out the axle end flange to 17/32 and then installed Carquest 610-073 wheel studs ($1.70 each) which are 1/2" x 2 3/8 with 15/16 knurl. I ground down most of the knurl to 1/2" but left 3/8" which fits in the 3/8" axle end flange nicely. Worked well for me. Jeff Chad 06-11-2002, 08:53 AM Some states, spacers are illegal. Pennsylvania, I have to fail vehicles for inspection if the wheel spacers are over 1/4" thick. Don't know how other states are. Sharon 06-11-2002, 11:07 AM Where did you get your 2" front wheel spacers. And tell about them. I'm thinking of ordering A.O.R 1 1/2" steel spacers for the front of my 84 truck. But Wow $ 189.00 Jeff | |