|
Ultim8kaos 06-03-2002, 04:47 PM I know the contemporary thinking is to mount the seats and the harnesses to the cage and that is the way my current setup is, however, I am planning a body swap (hybrid type) and am going to run an exo-cage due to a very narrow cab interior. Wondering what you guys with the exos attach your seats and harnesses to? Thanks :D Moab Austin 06-03-2002, 07:32 PM Originally posted by Ultim8kaos I know the contemporary thinking is to mount the seats and the harnesses to the cage and that is the way my current setup is, however, I am planning a body swap (hybrid type) and am going to run an exo-cage due to a very narrow cab interior. Wondering what you guys with the exos attach your seats and harnesses to? Thanks :D tieing anything into your interior from your exo will make a problem for oem style body mounts..(you can figure a way around that or just deal with it...) my though ts would be to (don't know what kinda body you got) run tubes across for the seat mounts, and run them through some hole saw holes into rockerskids... and figure a way to do the same with a verticle tube behind the seat for harnesses... or you could just make plates for the floor to strengthen it up... or unless that you think the exo will have gaps big enough for the body to fall out of ..then WHYYYYYYY????? | |