Pic's an build's of mj's please. Here's one of the g/f's.
89 4.0 5speed R.E 5.5' 32" mall terrain's
http://i97.photobucket.com/albums/l232/zukidave/S5001337.jpg

Mine............ will have 39's:D this weekend.

www.comancheclub.com

Mine is far from HARDCORE but here it is

89 4.0 5 speed all stock
91 Cherokee front axle and 98 Ford Explore rear end

SOA in the rear and home grown front end lift from rustys and syjacker and rock krawler

33x12.5 claws

http://pic20.picturetrail.com/VOL1391/6822645/13102940/244790858.jpg

the wifes 2wd 3" lift 31x10.5

http://pic20.picturetrail.com/VOL1391/6822645/13109548/194110194.jpg

and then there is our stock DD

http://pic20.picturetrail.com/VOL1391/6822645/13102940/240837512.jpg

http://img.photobucket.com/albums/v616/magoo117/new005-1.jpg still not done:shaking:

stock:
http://i16.photobucket.com/albums/b38/NSJAMES/MVC-001S.jpg

4", 34x9.5's

http://i16.photobucket.com/albums/b38/NSJAMES/DSCF0619.jpg

wheeling @ flatnasty,poser shot.
http://i6.photobucket.com/albums/y249/ILLXJ/WF07/HPIM0660.jpg

http://i6.photobucket.com/albums/y202/wheelingpictures/OFR%206-9-07/6.jpg

http://i6.photobucket.com/albums/y202/wheelingpictures/OFR%206-9-07/1.jpg

http://i6.photobucket.com/albums/y202/wheelingpictures/flat%20belly/1008.jpg

Mine............ will have 39's:D this weekend.

Might be easier to work on if you washed it:flipoff2:

RKCRAWLER's truck when i owned it

I've got one....

http://i16.photobucket.com/albums/b46/dirtycomanche/P1010588.jpg


And yes, it has leaf springs all over the bloody place.

http://i25.photobucket.com/albums/c62/95steel/roadtrip/Damagereunion2035.jpg

http://i25.photobucket.com/albums/c62/95steel/roadtrip/build15.jpg

Don't have any current pics/ wheeling pics with me.

Here is a pic of my shit

http://thumb17.webshots.net/t/56/56/9/37/97/2481937970057109497YHlnfM_th.jpg (http://rides.webshots.com/photo/2481937970057109497YHlnfM)


It is going through another build...this time 4.3 turbo 350 np203/d300 doubler 14 bolt d60, H1's on 42 irocs:flipoff2: at the rate I am going I might have it done it 6 more months

heres my pride and joy...not bad for a 16 year old huh.....:D
http://i184.photobucket.com/albums/x243/rigom/100_0148.jpg

letting my dad drive since he was bugging me...lol
http://i184.photobucket.com/albums/x243/rigom/rigomanche.jpg

Brother in laws old MJ on 33x10.50 TSLs.

http://img.photobucket.com/albums/v250/thedirtybirds/Bottoms35.jpg

http://img.photobucket.com/albums/v250/thedirtybirds/Bottoms38.jpg

http://img503.imageshack.us/img503/1389/dsc00949xf7.jpg

http://img525.imageshack.us/img525/3633/dsc00961it9.jpg

It's an eaton.

Better pic..

Here's my mild wheeler

'87 4.0, auto, longbed (bobbed 15"), 4.56, factory 44 welded

RIP

http://img.photobucket.com/albums/v478/gmanstone/mvc-004s_148.jpg
http://img.photobucket.com/albums/v478/gmanstone/579.jpg

here ya go... tame by many standards, but I drive it daily and its gets the job done

4.0, auto, 2" spacer kit. 31x11.50's on 15x7's

1pm:

http://i74.photobucket.com/albums/i273/Timmay822/MJ%20cutting/IMG_9390Medium.jpg

3pm:

http://i74.photobucket.com/albums/i273/Timmay822/MJ%20cutting/IMG_9438Medium.jpg

:flipoff2:

This is my GF's truck we built... 88MJ, 4.0L, auto, 4.5" coils, SOA rear, 33" mt/r's, bobbed bed... For how simple it is it works really well, with a little coaching she makes shit look easy. And the old 4.0L has about 230,000 miles on it and runs strong, we recently put in some newer ford motorsports mustang 19lb injectors in it which really woke it up... She got the truck for $350 and I tought her the basic mechanics of it when we fixed it up to make a safe driver out of it... So she should be able to fix most of the usual trail carnage without much help.


http://i18.tinypic.com/4yki2i1.jpg

http://i7.tinypic.com/4l7s19v.jpg

http://i18.tinypic.com/4zdpv1x.jpg

http://i14.tinypic.com/66oo2dz.jpg

Here's mine I'm kind of at a stand still with at the moment untill I get the Chief up and running

1988 Pioneer 1 tons and 1999 XJ sheetmetal,dash and power train.

http://memimage.cardomain.net/member_images/11/web/479000-479999/479208_205_full.jpg

and this is my $200.00 1988 chief. Stock with 95 HO long block and renix injection. Almost ready to fire up.

http://memimage.cardomain.net/member_images/11/web/479000-479999/479208_220_full.jpg

http://memimage.cardomain.net/member_images/11/web/479000-479999/479208_225_full.jpg

Heres a pic about a month old on mine (newer style frontend on it now). Ill get it done someday, just in time to sell it (I get bored easy!!)

http://im1.shutterfly.com/procserv/47b7db38b3127cce84962eef564c00000026108AauW7Jm5ZtT

The grocery getter, RIP.

Under construction........... :D

http://static.petrisimolin.com/gallery/data/images/Jeeper-Lava1.jpg

http://static.petrisimolin.com/gallery/data/images/Jeeper-Lava2.jpg

http://static.petrisimolin.com/gallery/data/images/mikjus-merrasmaki101107_001.JPG

http://static.petrisimolin.com/gallery/data/images/Jeeper-PA110042_640x480.JPG

and now with 37" Creepys
YouTube - 22.3.2008 (http://uk.youtube.com/watch?v=_GALLWG4o2A)

http://static.petrisimolin.com/gallery/data/images/Jeeper-P3220054_640x480.JPG

http://forums.offipalsta.com/picture.php?albumid=123&pictureid=43543

I like the direction that flatbed is headed... Was that a short or long bed? And do you have more info on the rear suspension?

it was long box vehicle, now shortened to swb.

rear suspension: Range-Rover wishbone and Toyota Hdj-80 rear LCA:s
and stock Xj front coils.

http://static.petrisimolin.com/gallery/data/images/Jeeper-jousitus1.jpg

http://i11.photobucket.com/albums/a172/Jake4x/236033971-1.jpg

1987 Jeep Comanche Long Box w/ a 2001 4.0L,aw-4,np231,2001 front end, Ajax/Trailer products fiberglass fenders, 2001 dash and center console, 12" travel Bilstein 7100s, Currie HD Steering,RE Drop bracket kit 4.5" w/ 1.5" spacer, D30 front w/ 4.10s D44 rear w/ 4.10s, 33" BFG A/Ts for Street and mild trail work, 33" BRG Baja's for the fun stuff...And lots more to come...

here's mine;

Dana 44's, spool, lock-rite, warn hubs, 38x14.50x15 SS TSL SX's, chopped bed, auto, A/C, camo tan, leaf spring conversion up front;

http://img.photobucket.com/albums/v200/randysford/wheelin%2012-17-06/HPIM0575.jpg?t=1184905702

http://img.photobucket.com/albums/v200/randysford/wheelin%2012-17-06/HPIM0605.jpg?t=1184905785

As she sits right now... Axles are ready to bolt in, 35" MTRs are ready to go as well. Should have it trailable in the next month or two.

http://farm2.static.flickr.com/1357/754859909_5b99fff2a4.jpg

Here's my buddy Led's MJ. Its his work, but I did the tube and rear 4-link
http://www.dandcextreme.com/club/trailrides/2.05/29.jpg
http://www.dandcextreme.com/club/trailrides/2.05b/11.jpg
http://www.dandcextreme.com/club/trailrides/2.05b/13.jpg
http://www.dandcextreme.com/club/trailrides/2.05c/47.jpg
http://www.dandcextreme.com/club/trailrides/2.05c/58.jpg

project d60 hp, 14 bolt, 39s, 108 wb, etc

Started on mine a few weeks ago. Should be getting to the good stuff here in this next week or so.
http://i208.photobucket.com/albums/bb142/MrShoeBoy/Picture1-1.jpg

AARON

Frame rails are stripped, some bracing will be added, then the drivetrain will be going back in and the suspension started. 3 link front with a long upper, and a double triangulated rear. I am hoping to start on the suspension next weekend. I am currently waiting on parts to get the drivetrain back in. Need to have this thing up and running by September cause I gotta have a daily driver :D
http://i208.photobucket.com/albums/bb142/MrShoeBoy/Picture3.jpg

AARON

Some updated pics...39's and 5.13's. Soon to be a 4 seater!!:D

Figured I should post up my babies.
http://pic20.picturetrail.com/VOL91/512063/712516/274492740.jpg

my 88: TJ AX-15/np231, 78 Dana44/9", Ford radius arms, 33" trXus MTs, Boggers for the rear, soon to have 4.88s and a rebuilt 4.0L
http://pic20.picturetrail.com/VOL91/512063/7745965/103747005.jpg

my 86: stock Metric ton 4x4 with the AMC-20 rearend and the still-alive 2.8L, 29" SXs
http://pic20.picturetrail.com/VOL91/512063/707562/274492667.jpg

my 90: 4.0L, AX-15, np-242, MJ Dana 44 and 98 Dana 30 with 3.55 gears, 31" MTRs (and I have a mini-spool for the rear).
http://pic20.picturetrail.com/VOL91/512063/11647508/255847779.jpg

Jeep on!
--Pete

89 pioneer 2.5
http://i64.photobucket.com/albums/h197/jeepthing07/Comanche/Nov03MJ8.jpg

heres my mj

http://i214.photobucket.com/albums/cc231/whwheeler21/IMG_4027.jpg

http://i214.photobucket.com/albums/cc231/whwheeler21/IMG_6281.jpg

working on Locked D60 for front

My Comanche right now, soon to be on its way to becoming a truggy
http://i31.photobucket.com/albums/c370/colegobin/Jeep/2154070_1_full.jpg
http://i31.photobucket.com/albums/c370/colegobin/Jeep/2154070_3_full.jpg

Here is a few more pics, you can see the box cut with the old paint job, one shot is of the rear 3/4. Let me know if you want any more. I would like to see more of your rig too.
http://i31.photobucket.com/albums/c370/colegobin/Jeep/101_0134.jpg
http://i31.photobucket.com/albums/c370/colegobin/Jeep/100_0311.jpg
http://i31.photobucket.com/albums/c370/colegobin/Jeep/100_0986.jpg
http://i31.photobucket.com/albums/c370/colegobin/Jeep/StaveMay2105022.jpg

See page 1 for the stock/pre flatnasty/tellico pics.

Let's just say that the rocks have not been kind to my rig.
The other side looks worse.

http://img254.imageshack.us/img254/771/dscn1775af8.jpg

taken at tellico last weekend.

drove 600 miles there and back. Who wants to give me a tow rig?

My mighty '86 w/ a 2.5l and auto. :laughing:

I put on coil spacers and stuffed in some 33x10.50s.

http://img.photobucket.com/albums/v393/squirriljeep/chuckspics019.jpg

My 1988 MJ.

http://img.photobucket.com/albums/v217/HazzzMatMan/IMG_2258.jpg

http://img.photobucket.com/albums/v217/HazzzMatMan/hostingnejeepinwolfboro010.jpg

http://img.photobucket.com/albums/v217/HazzzMatMan/DSCF3239.sized.jpg

Here's mine. I just bought it. It's a 4.0. BA-10 and a rear D44. It will get a '95 4.0HO with an AW-4 unless I find a good stick that will swap cheaply.

http://i120.photobucket.com/albums/o182/TNTACR/MJ001.jpg

Update I finally got mine out of the shop last month and have had it out twice.

http://pic20.picturetrail.com/VOL1391/6822645/13102940/278680390.jpg

http://pic20.picturetrail.com/VOL1391/6822645/13102940/278680394.jpg

Here's my old MJ. I sold it earlier this year unfortunately. Coolest looking rig I ever built...

http://tjhardcore.com/forum/files/pdr_0636.jpg

just cause i miss it :(

just cause i miss it :(

Here is current state. I have the rest of the bed and the back half of the cab cut out. Will get pics when camera is charged.

Fewmore for now. The cage work is next.

Stop wasting your time and just cut it all off. :smokin:

http://i74.photobucket.com/albums/i273/Timmay822/Brians%20Buggy/IMG_1204Medium.jpg

this is after the XRock anti sway bar was installed. Didn't change the articulation a single bit.

http://i11.photobucket.com/albums/a172/Jake4x/MJwithXROCKboxbrace003.jpg

I'd like to show off my friends rig....

Last spring
http://i98.photobucket.com/albums/l268/gittinit/helping%20out/Rons1_small.jpg
then OOPS
http://i98.photobucket.com/albums/l268/gittinit/helping%20out/Rons3_small.jpg
Itl be coming out of the closet, I mean shop soon...
http://i98.photobucket.com/albums/l268/gittinit/helping%20out/Rons6_small.jpg
http://i98.photobucket.com/albums/l268/gittinit/helping%20out/Rons9_small.jpg
http://i98.photobucket.com/albums/l268/gittinit/helping%20out/Rons8_small.jpg
If you couldn't tell its getting a grill and fenders from like these 08' chineese version cherokees
http://i98.photobucket.com/albums/l268/gittinit/helping%20out/Ron10.jpg

:smokin:

Here a couple of bad pics of my 91 Eliminator. TNT longarm 7.5 inch lift welded 8.25 rear Dana 30 front locked. 35 inch krawlers. Too much done to it to list.

http://i48.photobucket.com/albums/f224/comancheon33/comancheon35-3.jpg
http://i48.photobucket.com/albums/f224/comancheon33/comancheon35.jpg


Here is my 89 2.5 4 speed 2wd beater.

http://i48.photobucket.com/albums/f224/comancheon33/lilcomanche2.jpg
http://i48.photobucket.com/albums/f224/comancheon33/lilcomanche1.jpg

I am going to look at another one tomorrow. Makes four of them I have now and will be the 13th one I have owned. I love these little trucks. They draw attention everytime you drive them. Stock or modified.

88 MJ wit buch of goodies.

http://i172.photobucket.com/albums/w30/je1988ep/overlands/IMG_0139.jpg
http://i172.photobucket.com/albums/w30/je1988ep/overlands/IMG_0131.jpg
http://i172.photobucket.com/albums/w30/je1988ep/overlands/IMG_0098.jpg

She scored a 1150 on a 20 deg. ramp
http://i172.photobucket.com/albums/w30/je1988ep/high%20sierra%2070/084.jpg
http://i172.photobucket.com/albums/w30/je1988ep/molina/Mytruck.jpg
http://i172.photobucket.com/albums/w30/je1988ep/molina/DSC02000.jpg
http://i172.photobucket.com/albums/w30/je1988ep/molina/DSC02004.jpg

This is a climbin little Indian
I am the biggest underdawg at all of the runs

this is my friends 88 mj
the day he got it
http://i80.photobucket.com/albums/j177/ashie322/100_0086.jpg
after 8" short arm and 35's
http://i80.photobucket.com/albums/j177/ashie322/101_0055.jpg
http://i80.photobucket.com/albums/j177/ashie322/101_0061.jpg
http://i80.photobucket.com/albums/j177/ashie322/101_0060.jpg

soon to get dana 44 f/r custom longarms dana 300 37's bobed and exoed

Some updated pics of mine.....

http://slide-rite.net/gallery2/d/788-2/riohva+07+010.JPG

http://slide-rite.net/gallery2/d/773-1/riohva+07+005.JPG

http://slide-rite.net/gallery2/d/827-1/riohva+07+023.JPG

http://slide-rite.net/gallery2/d/833-2/riohva+07+025.JPG

http://i155.photobucket.com/albums/s287/mottstj/hannibal5-30.jpg

Good to see this post still going.Here's some pic's test fitting the 36's on the g/f's. I will be building a three link set up for the front over the winter.
http://i97.photobucket.com/albums/l232/zukidave/S6300313.jpg
http://i97.photobucket.com/albums/l232/zukidave/S6300311.jpg

Yea.....a little:D She is sittin on all 4's now(just how i like'em) few more bars and gussets, brakes, steering and some good'ol rattle can and she'll be good as new.Here are some more pics from the last couple days

88 4.0 5 speed. 7.5 RE springs and spring over rear 35" BFG's 8.8 and HP 30

http://memimage.cardomain.net/member_images/11/web/479000-479999/479208_238_full.jpg

http://memimage.cardomain.net/member_images/11/web/479000-479999/479208_239_full.jpg

http://memimage.cardomain.net/member_images/11/web/479000-479999/479208_240_full.jpg

heres my pile....

http://www.myjunkinyourtrunk.com/albums/bd081107/DSCF0811_Medium.sized.jpg

http://www.myjunkinyourtrunk.com/albums/bd081107/DSCF0814_Medium.sized.jpg

http://www.myjunkinyourtrunk.com/albums/bd081107/DSCF0813_Medium.sized.jpg

Here is my 87 fairly unmolested
http://i59.photobucket.com/albums/g312/crzyxj/ComanchePioneer002.jpg
http://i59.photobucket.com/albums/g312/crzyxj/ComanchePioneer003.jpg

http://img212.imageshack.us/img212/6380/016fm5.jpg (http://imageshack.us)
http://img155.imageshack.us/img155/7927/017ve4.jpg (http://imageshack.us)
http://img212.imageshack.us/img212/913/019cv3.jpg (http://imageshack.us)
http://img212.imageshack.us/img212/4302/020cz4.jpg (http://imageshack.us)

http://img299.imageshack.us/img299/367/021du1.jpg (http://imageshack.us)

So I almost got mine done. Still need to fab up the swaybars and shock mounts. Then its coming appart for primer and paint. Build thread coming soon.
http://i208.photobucket.com/albums/bb142/MrShoeBoy/MJ/Picture081.jpg

AARON

Poser shots..:shaking:

http://i62.photobucket.com/albums/h100/deanwhitwood/DSC_0027.jpg
http://i62.photobucket.com/albums/h100/deanwhitwood/DSC_0051.jpg
http://i62.photobucket.com/albums/h100/deanwhitwood/DSC_0043.jpg

my DD 87 MJ
d44s front and rear, 4.56, 33x12.5 5 speed
http://solofabworks.com/images2/rigs3/l_420ffa19278387bee5e1c8b46485aa13.jpg
http://solofabworks.com/images2/rigs3/IMG_0146.JPG
http://solofabworks.com/images2/rigs3/IMG_0221.JPG

My new daily driver................

http://i47.photobucket.com/albums/f172/offroadman83/IMG_2038.jpg

http://i47.photobucket.com/albums/f172/offroadman83/IMG_2039.jpg

http://i47.photobucket.com/albums/f172/offroadman83/IMG_2040.jpg

Heres a few pics of my mj well atleast whats left of it,was pretty rusty when I got so it lost a few body parts.

aaron
http://i72.photobucket.com/albums/i187/bagnell_2006/kids038.jpg
http://i72.photobucket.com/albums/i187/bagnell_2006/tub004.jpg
http://i72.photobucket.com/albums/i187/bagnell_2006/tub003.jpg

http://i291.photobucket.com/albums/ll297/plbata/S1050097.jpg
http://i291.photobucket.com/albums/ll297/plbata/BPort%20080208/100_9602.jpg
http://i291.photobucket.com/albums/ll297/plbata/BPort%20080208/S4020341.jpg
http://i291.photobucket.com/albums/ll297/plbata/Bport%20100408/wheelin005.jpg
http://i291.photobucket.com/albums/ll297/plbata/Bport%20100408/wheelin007.jpg

My 88, 30/8.8 4.56 locked on both ends. Q78 Swampers on 15" steelies.

here is my MJ

http://pic30.picturetrail.com/VOL1526/8589982/19655088/327880000.jpg
http://pic30.picturetrail.com/VOL1526/8589982/19655088/318241663.jpg
http://pic30.picturetrail.com/VOL1526/8589982/19655088/322375889.jpg

I got a couple poser shots. It's not done yet. 37 for now. Soon to be 38.5 boggers.
http://i534.photobucket.com/albums/ee350/indian88/jeep017.jpg
http://i534.photobucket.com/albums/ee350/indian88/jeep001.jpg
http://i534.photobucket.com/albums/ee350/indian88/jeep002.jpg
14 bolt/10 bolt, dana 300, 4.56's, welded front and rear.

Mines not that Badass, but here ya go :grinpimp:


http://i48.photobucket.com/albums/f244/Thumper660/jeepcomanchealmostdonepics009.jpg?t=1228090778

Motorvation

http://i48.photobucket.com/albums/f244/Thumper660/jeepcomanchealmostdonepics005.jpg?t=1228090885

front end, 44 :flipoff2:, It'll hold for a little while:homer:

http://i48.photobucket.com/albums/f244/Thumper660/jeepcomanchealmostdonepics008.jpg?t=1228091014


I've got about 5000 into this including buying it. :p

Mines not that Badass, but here ya go :grinpimp:


http://i48.photobucket.com/albums/f244/Thumper660/jeepcomanchealmostdonepics009.jpg?t=1228090778

Motorvation

http://i48.photobucket.com/albums/f244/Thumper660/jeepcomanchealmostdonepics005.jpg?t=1228090885

front end, 44 :flipoff2:, It'll hold for a little while:homer:

http://i48.photobucket.com/albums/f244/Thumper660/jeepcomanchealmostdonepics008.jpg?t=1228091014


I've got about 5000 into this including buying it. :p

offroadman83, your jeep is sick!, love the woodgrain, and the rims look great on that thing. I know it would be alot of work, but a 97+ front end would make that look amazing

Here's my MJ. 44's, locked, alloys, 5.13s, 36in. swampers, bed bobbed 8in., lots more. Not done by any means.


http://i247.photobucket.com/albums/gg144/kilrjeep98/IMG_0454.jpg
http://i247.photobucket.com/albums/gg144/kilrjeep98/IMG_0458.jpg
http://i247.photobucket.com/albums/gg144/kilrjeep98/Mission%20Impossible/IMG_0467.jpg

http://img.photobucket.com/albums/v616/magoo117/new030.jpg been working on my endless project alot the past month or so. actually see an end in sight:smokin:

Nice!

Is that a chevy rear panel?

Nice!

Is that a chevy rear panel? Sonoma, actually :D

http://img.photobucket.com/albums/v616/magoo117/new030.jpg been working on my endless project alot the past month or so. actually see an end in sight:smokin:

Looks sick! got a front/ rear shot, specs?

Looks sick! got a front/ rear shot, specs? I'll get some more pics, it has a Chevy 4.3 Vortec, TCI Turbo 350, Atlas transfer, f & r 60's, 42 TSL's and lots a tube work.

Looks killer Magoo, what are u useing for front springs/shocks. I see link bars but no C/O's or shocks? What made you use the sanoma rear panel? Was the MJ panel on yours hammered? Just wondering.Mine is similar to yours just a little longer. I am putting a fold-n-tumble rear seat in mine. What is your WB? Mine is 118".Here is mine finished and 1 at summertown. I have since pulled the D-44 and i am putting a 60 up front.

Looks killer Magoo, what are u useing for front springs/shocks. I see link bars but no C/O's or shocks? What made you use the sanoma rear panel? Was the MJ panel on yours hammered? Just wondering.Mine is similar to yours just a little longer. I am putting a fold-n-tumble rear seat in mine. What is your WB? Mine is 118".Here is mine finished and 1 at summertown. I have since pulled the D-44 and i am putting a 60 up front. I sold the 'manche bed and the Sonoma sides I got for free. They body lines actually are crazy close. I have Fox 2.5 Airshox front and rear. WB= 113"

Mines not that Badass, but here ya go :grinpimp:


http://i48.photobucket.com/albums/f244/Thumper660/jeepcomanchealmostdonepics009.jpg?t=1228090778




Any more pics of that bed??

Hey Folks, some sweet looking MJ's on here. I just registered and will definatly take some time and checkout some of the cool rigs on here.

Here's my '89 getting the unibody plated with 3/16
http://i288.photobucket.com/albums/ll172/HMFI/P1000414-1.jpg

Black Box and Atlas 4.3
http://i288.photobucket.com/albums/ll172/HMFI/JUNE212008068.jpg

Sitting on it's own. D60, Sterling 10.25 converted to disks, 5.38's, Detroits, '06 Power Wagon rear leafs,39.5's
http://i288.photobucket.com/albums/ll172/HMFI/Exocage012.jpg

How it sits for now.
http://i288.photobucket.com/albums/ll172/HMFI/TESTRUNAUG3007.jpg
http://i288.photobucket.com/albums/ll172/HMFI/TESTRUNAUG3005.jpg
Cheers,
Sheldon.

Any more pics of that bed??

heres one from the rear.

http://i48.photobucket.com/albums/f244/Thumper660/jeepcomanchealmostdonepics010.jpg

Fred Perry's MJ
Clemson 4wheel Center

http://i213.photobucket.com/albums/cc97/yotacrawler/OFF%20ROADING/0829081224.jpghttp://i213.photobucket.com/albums/cc97/yotacrawler/OFF%20ROADING/0829081224.jpg

Fred Perry's MJ
Clemson 4wheel Center

http://i213.photobucket.com/albums/cc97/yotacrawler/OFF%20ROADING/0829081224.jpg

very nice, more??

http://i469.photobucket.com/albums/rr54/wormycrm99/jeep/102_0281-1.jpg
http://i469.photobucket.com/albums/rr54/wormycrm99/jeep/102_0282-1.jpg
currently beat to death
http://i469.photobucket.com/albums/rr54/wormycrm99/jeep/100_0677-1.jpg
http://i469.photobucket.com/albums/rr54/wormycrm99/jeep/100_0700-1.jpg
last 2 pics dated wrong actually october last year

Nice pictures!
The guys at Comanche Club Forums suggested I check the place out. Here are the only non-driveway shots I have - for now:p
http://i264.photobucket.com/albums/ii165/Drahcir495/Comanche/Wheelin/HPIM0203.jpg

http://i264.photobucket.com/albums/ii165/Drahcir495/Comanche/Wheelin/HPIM0194.jpg

Nothing too extreme. Built it for my wife to drive around and to take to the mountains.

Started as 2WD with the Peugeot 5 speed.
http://i143.photobucket.com/albums/r127/reson46/MJ/IMG_1976.jpg

It's now 4WD with an AW4, 231 doubler, TNT Y-link front suspension, 8.8 rear, Auburn ECTEDs, and other crap.
http://i143.photobucket.com/albums/r127/reson46/Four%20Wheeling/Walker%20Valley/IMG_6072.jpg

http://i143.photobucket.com/albums/r127/reson46/Four%20Wheeling/Walker%20Valley/11_2008/DSCN0634.jpg

http://i143.photobucket.com/albums/r127/reson46/Four%20Wheeling/Scott%20Turner%20Road/IMG_0137.jpg

http://i143.photobucket.com/albums/r127/reson46/MJ/Tail%20Lights/IMG_0198.jpg

Willy

lets see some more!!!!!!!!!!!

Heres my 89 with HOMEBREW leaf spring conversion, high steer, d60, hp44, 5.38s, welded rear, spooled front, hydro assist, pushbutton AW4, flatbed, bald swampers, OBA, STARTED OFF AS A 2wd 5speed
http://i135.photobucket.com/albums/q126/xraidedj/P7060025.jpg
http://i135.photobucket.com/albums/q126/xraidedj/P7060026.jpg
http://i135.photobucket.com/albums/q126/xraidedj/P7060028.jpg
http://i135.photobucket.com/albums/q126/xraidedj/P7060030.jpg
http://i135.photobucket.com/albums/q126/xraidedj/P7060036.jpg
http://i135.photobucket.com/albums/q126/xraidedj/P7060050.jpg
http://i135.photobucket.com/albums/q126/xraidedj/100_0893.jpg
http://i135.photobucket.com/albums/q126/xraidedj/IMG00121-20090513-2036.jpg

Here is my new DD/mild wheeler:
http://inlinethumb36.webshots.com/44131/2332368970103920432S600x600Q85.jpg (http://good-times.webshots.com/photo/2332368970103920432bzjanN)

91' w/ HO 4.0L, 96' AX-15/231, 97' D30, 87' XJ D44, 2" BB, 245/75/16 MT/R's...soon to get new adjustable flex joint control arms, IRO track bar, 3" coils, and Hell Creek 3" rear leaves.

My DD MJ. 92 4.6 stroker, 8.8 4.88's, acos's, 5.5 re kit, 35" toyo's, wacker flares. Edelbrock extreme shocks. Hansen front bump with 9.5 si. Lookin for rear bumper. Mopar go man go paint.

http://inlinethumb03.webshots.com/45186/2094075940086806890S425x425Q85.jpg (http://good-times.webshots.com/photo/2094075940086806890zQUUSM)

http://inlinethumb36.webshots.com/34979/2836872980086806890S425x425Q85.jpg (http://good-times.webshots.com/photo/2836872980086806890bPGDub)

http://inlinethumb32.webshots.com/28575/2154189250086806890S425x425Q85.jpg (http://good-times.webshots.com/photo/2154189250086806890olZluB)

http://inlinethumb25.webshots.com/42776/2459147430086806890S425x425Q85.jpg (http://good-times.webshots.com/photo/2459147430086806890eNXNij)

http://inlinethumb33.webshots.com/12064/2438031020086806890S425x425Q85.jpg (http://good-times.webshots.com/photo/2438031020086806890RzgrGM)

http://i213.photobucket.com/albums/cc97/yotacrawler/OFF%20ROADING/0829081224.jpg

That's a fine-lookin MJ. I used to hang out with some guys from Clemson 4WD when I went to school there. Wish I had an in over there now that I have a jeep!

Mine's changed since I last posted here.

60/14, 5.38s, both diffs welded, 3 link with custom crossmember, full hydro, 37s on H2s.

http://img.photobucket.com/albums/v217/HazzzMatMan/IMG_3650.jpg

http://img.photobucket.com/albums/v217/HazzzMatMan/P9120084.jpg

http://img.photobucket.com/albums/v217/HazzzMatMan/swanzey/IMG_3711.jpg

http://img.photobucket.com/albums/v217/HazzzMatMan/swanzey/IMG_3731.jpg

And here it is yesterday.
http://img.photobucket.com/albums/v217/HazzzMatMan/IMG_3780.jpg

my little 1988 comanche 2wd 2.5 4spd....the pics where it was black it was trim to fit 35's with 2.5 inch lift tj coil up front stock in the back with 4:88 gears.....in a dana 35....that lasted about 3 months lol then the pics with it white are the 2.5" coils 2" spacers and 3 inch lift in the rear, yj revolver shackles and 33's with a 97 grand cherokee axle 3:73 gears factory limited slip and disc brakes sbc injector....not sure if it is actually helping much but its getting better mileage....and seams to have alot more bottom end.....let me know if i need to ditch the pic with my buddy flipping the bird lol

483597

483598

483599

483600

483601

here's mine

http://i239.photobucket.com/albums/ff208/bpm4x4/IMG_7372Small.jpg

http://i239.photobucket.com/albums/ff208/bpm4x4/aug2009020.jpg

tree
http://www.cybershanks.com/manual/brian-dent.jpg

heres mine. not really bad ass but its a fun little wheeler. http://i94.photobucket.com/albums/l102/redneck23ms/100_0762.jpg http://i94.photobucket.com/albums/l102/redneck23ms/100_0760.jpg http://i94.photobucket.com/albums/l102/redneck23ms/morris%20mountain%20nov09/100_0790.jpg http://i94.photobucket.com/albums/l102/redneck23ms/ride-meeting%207-12-09/100_0699.jpg

Here's mine with the wheel base shortened up to 106".
http://i114.photobucket.com/albums/n265/comanchekid/utf-8BSU1HMDAwMDYtMjAwOTExMTItMDkyN.jpg
http://i114.photobucket.com/albums/n265/comanchekid/utf-8BSU1HMDAwMDctMjAwOTExMTItMDkyO.jpg

Waggy Dana 44's, Detroits, 5:13's, 35 creepy's

hey comanchekid do you have anymore pics of your mj im interested in doing that same axle swap......or perhaps do you have a build thread?

hey comanchekid do you have anymore pics of your mj im interested in doing that same axle swap......or perhaps do you have a build thread?

I don't have any pics of the build it was done 5 years ago.
The front I used a RE xj bracket kit.
the rear I used mopar spring perches.
If I did the rear again I would us RE spring perches to help with axle wrap.

And on the front make sure you cut the Waggy front driverside spring perch off before putting on the brackets...

I don't have any pics of the build it was done 5 years ago.
The front I used a RE xj bracket kit.
the rear I used mopar spring perches.
If I did the rear again I would us RE spring perches to help with axle wrap.

And on the front make sure you cut the Waggy front driverside spring perch off before putting on the brackets...

I think the TNT kit is better than the RE kit, I also have the RE kit on my waggy 44, but it was a bit of a pain to install.

Not bad ass but heres mine. Have only been able to take it out once, nothing major though.

4.7l stroker, d30 w/alloys, 8.25 w/alloys, front and rear arb's, 4.56's, 35's

how it started

http://i5.photobucket.com/albums/y195/BlueXJ/Project%20MJ/IMG_0249.jpg

http://i5.photobucket.com/albums/y195/BlueXJ/Project%20MJ/IMG_2047.jpg

http://i5.photobucket.com/albums/y195/BlueXJ/Project%20MJ/DSCN0497.jpg

http://i5.photobucket.com/albums/y195/BlueXJ/Rocks%20and%20Valleys/IMG_3178.jpg

http://i5.photobucket.com/albums/y195/BlueXJ/Rocks%20and%20Valleys/IMG_2010.jpg

http://i5.photobucket.com/albums/y195/BlueXJ/Rocks%20and%20Valleys/IMG_3171.jpg

l_89a6d9abf371ef21d4455587394ab289

http://l_89a6d9abf371ef21d4455587394ab289

deff cant figure out how to get pics on here

My Jeep, while I still have it.

87 - 4.0, AX-15, 231, Waggy 44 front, MJ 44 rear, TnT long-arms

http://i28.photobucket.com/albums/c218/brenda_miers86/cimg0205u.jpg

http://i28.photobucket.com/albums/c218/brenda_miers86/109_0209.jpg

http://i28.photobucket.com/albums/c218/brenda_miers86/DSC_3363.jpg

Build thread: http://comancheclub.com/forums/viewtopic.php?t=9854&postdays=0&postorder=asc&start=0

Sale thread: http://www.pirate4x4.com/forum/showthread.php?t=850691 - Yup, it's for sale.

http://carphotos.cardomain.com/ride_images/3/2785/3529/31961764005_large.jpg

http://carphotos.cardomain.com/ride_images/3/2785/3529/31961764001_large.jpg

http://carphotos.cardomain.com/ride_images/3/2785/3529/31961764004_large.jpg

http://carphotos.cardomain.com/ride_images/3/2785/3529/31961764002_large.jpg

http://carphotos.cardomain.com/ride_images/3/2785/3529/31961764003_large.jpg

http://carphotos.cardomain.com/ride_images/3/2785/3529/31961764007_large.jpg

http://carphotos.cardomain.com/ride_images/3/2785/3529/31961764008_large.jpg

http://carphotos.cardomain.com/ride_images/3/2785/3529/31961764006_large.jpg

Fred Perry's MJ
Clemson 4wheel Center

http://i213.photobucket.com/albums/cc97/yotacrawler/OFF%20ROADING/0829081224.jpghttp://i213.photobucket.com/albums/cc97/yotacrawler/OFF%20ROADING/0829081224.jpg

I guess I am lucky enough to live .5 mile away from your shop that I get to drive past this thing every time I leave the house!!! So have you all retired this rig or does it still see use, I never see it leave the fence? Matter of fact I'm about to go to Wendy's in Clemson, so I'll get to see it in 5 minutes!!!:D

Well mine isn't bad ass, but isn't every MJ bad ass?

1988
Welded Turdy Five
Aussie locker up front in a D30
6.5" Rough Country Lift
C-Rok Steering Brace
Iron Rock Tie Rod
33x12.5x15 Craigslist specials

My biggest question right now is, should I remove the flares and cut the fenders?

http://i275.photobucket.com/albums/jj295/mbogosia/DSC06066.jpg

http://i275.photobucket.com/albums/jj295/mbogosia/DSC06069.jpg

Well mine isn't bad ass, but isn't every MJ bad ass?
So true

http://usjeeps.com/host/7064bf13a5334d63.jpg

http://usjeeps.com/host/7064bf13a51bd87f.jpg

http://usjeeps.com/host/7064b6acc86624bd.jpg

Here's mine. Pics were taken this past Saturday. Its on 42" Iroks now.

http://i360.photobucket.com/albums/oo42/Hunnefeld77/P1010039.jpg

http://i360.photobucket.com/albums/oo42/Hunnefeld77/P1010036.jpg

http://i360.photobucket.com/albums/oo42/Hunnefeld77/P1010006.jpg

http://i360.photobucket.com/albums/oo42/Hunnefeld77/P1010004.jpg

91 Comanche
http://i41.photobucket.com/albums/e293/Gravid/Jeep%20Comanche/DSC01966.jpg

http://i41.photobucket.com/albums/e293/Gravid/Jeep%20Comanche/wheel2.jpg

http://i41.photobucket.com/albums/e293/Gravid/Jeep%20Comanche/DSC01965.jpg

Need some Comanche rear leaf springs, got any?

Mine's also not bad ass. But I do wheel on some bald ass tires. I love all the MJs with the custom flatbeds.

http://img.photobucket.com/albums/v702/xjohnnyc/Big%20Bear/jb1.jpg

i think mine qualifys to be here



http://i749.photobucket.com/albums/xx137/Tbeasley_2009/31399_1440439218306_1452819012_1154.jpg

http://i749.photobucket.com/albums/xx137/Tbeasley_2009/31149_1458989322047_1452819012_1199.jpg

Here's my 88 longbed, the original build I did shown... 8.8, long arms, bobbed bed, 4.10s, cage, straight forward stuff. It's now a 1 ton buggy, completely reworked... Almost finished. I'll post up final pics when's it's finished. It's definately a Badass MJ now.

Build 1:
http://i38.photobucket.com/albums/e149/barillms/summer07040-1.jpg

Build 2: Almost ready!
Ford 60 front, 14 Bolt rear, hydro assist, PSC Box, 5.38s, linked, locked on 39.5 Rockers & H1 beadlocks, coils front & rear
http://i38.photobucket.com/albums/e149/barillms/e2607967.jpg
http://i38.photobucket.com/albums/e149/barillms/051cad51.jpg

Getting closer, D60's and 38's

http://i30.tinypic.com/wspp43.jpg

http://i32.tinypic.com/jug58l.jpg

http://i29.tinypic.com/2vxp282.jpg

Here's a pic of my old MJ
http://i822.photobucket.com/albums/zz143/bigblocks4life/Comanche/jeep42.jpg

Mine's also not bad ass. But I do wheel on some bald ass tires. I love all the MJs with the custom flatbeds.

http://img.photobucket.com/albums/v702/xjohnnyc/Big%20Bear/jb1.jpg




Are you ever going to paint that thing, Johnny???? :mr-t:

E

I'll play....

Still a work in progress but should be done soon.

I'll play....

[/IMG]

so...whats with your quote in your sig?:shaking:

so...whats with your quote in your sig?:shaking:

It is just solid advice that I learned from a blow hard that wants to fit in over here.

You're on Pirate, what did you expect?

Bringing this thread back from the dead because I love MJ's.. Here's my old one that I knew nothing about.... Don't have any wheeling shots either.
http://i125.photobucket.com/albums/p42/TL426-86GT/bigblue002.jpg

Bringing this thread back from the dead because I love MJ's.. Here's my old one that I knew nothing about.... Don't have any wheeling shots either.
http://i125.photobucket.com/albums/p42/TL426-86GT/bigblue002.jpg

Where did you get that hood? or did you make it?

I did none of the work to the truck sadly.. I know barely anything about it. The guy that owned it before us was a body man and I'm pretty sure he made the hood.

Ok does anyone know if they make cowl hoods for cherokees? instead of doin the crappy plastic autozone speacial?

work in progress.
http://i335.photobucket.com/albums/m480/drywaterbm1/MiddleFork-June056.jpg
http://i335.photobucket.com/albums/m480/drywaterbm1/MiddleFork-June054.jpg
http://http://i335.photobucket.com/albums/m480/drywaterbm1/JeffsMiddleFork-June004.jpg
http://i335.photobucket.com/albums/m480/drywaterbm1/July1st-rockcreek021.jpg
cro-moly stuffed d30/d44, OX'ed front/rear, 4.7L,
soon to be ditched 8" short arm. Not really "badass", but it's a start.
Boats:usa:

Dont let your dad drive it!!He already bent your rear bumper!!!!lol!!!

Here's my junk. Narrowed Chevy 60, CnC 14 Bolt, 4.7 stroker, 231/300 doubler w/ 32 spline outputs, 3 link front with 39 Krawlers. Built it for ECORS, does great.

Almost done...about another month or two.

http://i888.photobucket.com/albums/ac84/MoparManiacCuda66/1990%20MJ/IMG_2619.jpg

http://i888.photobucket.com/albums/ac84/MoparManiacCuda66/1990%20MJ/IMG_2621.jpg

http://i888.photobucket.com/albums/ac84/MoparManiacCuda66/1990%20MJ/IMG_2624.jpg

http://i888.photobucket.com/albums/ac84/MoparManiacCuda66/1990%20MJ/IMG_2629.jpg

http://i888.photobucket.com/albums/ac84/MoparManiacCuda66/1990%20MJ/IMG_2646.jpg

Pretty lousy pics....

115" wheelbase and 20.25" belly height.

http://img.photobucket.com/albums/v217/HazzzMatMan/Stage%205/IMG_4155.jpg

http://img.photobucket.com/albums/v217/HazzzMatMan/Stage%205/IMG_4157.jpg

Looks sweet Twisty!

Saw your rig at Fall Crawl last year, looked badass.

:smokin:

Thanks man! Have we met before? I don't recognize your rig. :( It looks great!! I love the bed bob work!

My MJ will be a FC again this year. Come over and say hi if you see it around!!!

Thanks man!

Nah I had a purple XJ on 35s before this. Started building the MJ last July.

Maybe we'll get to wheel together in the future :)

it was long box vehicle, now shortened to swb.

rear suspension: Range-Rover wishbone and Toyota Hdj-80 rear LCA:s
and stock Xj front coils.

http://static.petrisimolin.com/gallery/data/images/Jeeper-jousitus1.jpg

How do those front stock xj springs work and flex for you? I was thinking about useing my stock xj coils for my rear three link on my buggy.

How do those front stock xj springs work and flex for you? I was thinking about useing my stock xj coils for my rear three link on my buggy.

Actually they work pretty good! Soft to drive in bumpy roads and they carry some weight too (I have to add 2" blocks for longer trips to keep ride height same, when there is all spare parts and camping gear in bed)
If i remember right..... i used 4.0 ZJ front springs.

Springs slide in those bump stop tubes, So they don´t limit suspension travel at all (fixed to the spring plate)

Here is my 87 fairly unmolested
http://i59.photobucket.com/albums/g312/crzyxj/ComanchePioneer002.jpg
http://i59.photobucket.com/albums/g312/crzyxj/ComanchePioneer003.jpg

There's still mods to be made, but this clean MJ has come along nicely!:smokin:

Got mine out in the woods for the first time two weeks ago.

Going to NAC-fest at RC in a week, then caging it as soon as I get back.

http://i258.photobucket.com/albums/hh244/reelbigdundy87/DSC02013.jpg

Here is my MJ. Was pretty built when I purchased it. Since purchase, rear bumper, sliders, gas tank skid (all home built) synthetic XD line.
Getting ready to install my hp44 in the front and its getting an atlas as well.

Basics.. 4.7 stroker, D44 rear, D44 front(any day now) 35 goodyears, 1999 exterior and interior conversion. Basically a frameless off restoration 10k miles ago.

http://i138.photobucket.com/albums/q273/H3RESQ/eliminator/2011-06-16_13-04-23_963.jpg
http://i138.photobucket.com/albums/q273/H3RESQ/eliminator/249504_1771849660038_1353156040_31524278_1986442_n .jpg
http://i138.photobucket.com/albums/q273/H3RESQ/eliminator/2011-05-28_14-54-55_60.jpg
http://i138.photobucket.com/albums/q273/H3RESQ/eliminator/2011-04-30_16-06-54_984.jpg

Here is my project. Going to have a full size D44 front and 9 inch in the rear both with 5.13's. Will be doing radius arms with 1.25 inch ruffstuff heims in the front and staying leaf in the rear. Will eventually be on 36's or 37's but will probably use the new 35's I have for now until the funds come available to new tires.

As it sits right now.
http://i258.photobucket.com/albums/hh278/hondacivicdx92/670894d1.jpg
http://i258.photobucket.com/albums/hh278/hondacivicdx92/b2126ef6.jpg
http://i258.photobucket.com/albums/hh278/hondacivicdx92/f467892c.jpg

Here is my MJ. Was pretty built when I purchased it. Since purchase, rear bumper, sliders, gas tank skid (all home built) synthetic XD line.
Getting ready to install my hp44 in the front and its getting an atlas as well.

Basics.. 4.7 stroker, D44 rear, D44 front(any day now) 35 goodyears, 1999 exterior and interior conversion. Basically a frameless off restoration 10k miles ago.

http://i138.photobucket.com/albums/q273/H3RESQ/eliminator/2011-06-16_13-04-23_963.jpg
http://i138.photobucket.com/albums/q273/H3RESQ/eliminator/249504_1771849660038_1353156040_31524278_1986442_n .jpg
http://i138.photobucket.com/albums/q273/H3RESQ/eliminator/2011-05-28_14-54-55_60.jpg
http://i138.photobucket.com/albums/q273/H3RESQ/eliminator/2011-04-30_16-06-54_984.jpg

you get this from NC?

Here is my MJ. Was pretty built when I purchased it. Since purchase, rear bumper, sliders, gas tank skid (all home built) synthetic XD line.
Getting ready to install my hp44 in the front and its getting an atlas as well.

Basics.. 4.7 stroker, D44 rear, D44 front(any day now) 35 goodyears, 1999 exterior and interior conversion. Basically a frameless off restoration 10k miles ago.


http://i138.photobucket.com/albums/q273/H3RESQ/eliminator/2011-04-30_16-06-54_984.jpg

man i remember watching this thing being built from stock when it was red! looking sweet man i wanted to buy it when he was selling it but id be to afraid to scratch it haha

Original builder was in NC, sold it to a guy in Indiana, then I bought it and brought it up here to Washington state.

Bought it to wheel it. 3 weeks in Moab starting the 26th of Aug.
http://i138.photobucket.com/albums/q273/H3RESQ/eliminator/2011-05-28_15-03-46_328.jpg

My 86 long bed. Basics are 2.5L, ax-5, 9" rear, 44 front, 4.56's, winch, bumpers, exaust, 7.5's lift. was on 35s now borrowed 33's due to funds.
http://http://a5.sphotos.ak.fbcdn.net/hphotos-ak-snc4/44183_1402858674609_1326600091_30935707_3839323_n. jpg
http://http://a6.sphotos.ak.fbcdn.net/hphotos-ak-snc4/40157_1401093430479_1326600091_30932370_3441452_n. jpg

Fixed.

My 86 long bed. Basics are 2.5L, ax-5, 9" rear, 44 front, 4.56's, winch, bumpers, exaust, 7.5's lift. was on 35s now borrowed 33's due to funds.
http://a5.sphotos.ak.fbcdn.net/hphotos-ak-snc4/44183_1402858674609_1326600091_30935707_3839323_n. jpg
http://a6.sphotos.ak.fbcdn.net/hphotos-ak-snc4/40157_1401093430479_1326600091_30932370_3441452_n. jpg

Fixed.

Thanks!!

Actually they work pretty good! Soft to drive in bumpy roads and they carry some weight too (I have to add 2" blocks for longer trips to keep ride height same, when there is all spare parts and camping gear in bed)
If i remember right..... i used 4.0 ZJ front springs.

Springs slide in those bump stop tubes, So they don´t limit suspension travel at all (fixed to the spring plate)

I have xj 4.0 front springs i was thinking about putting in the back

Original builder was in NC, sold it to a guy in Indiana, then I bought it and brought it up here to Washington state.

Bought it to wheel it. 3 weeks in Moab starting the 26th of Aug.
http://i138.photobucket.com/albums/q273/H3RESQ/eliminator/2011-05-28_15-03-46_328.jpg

Where do you wheel? I hit Elbe and Evans a lot.

This MJ is clean, but that shouldn't last for long now that he has it out on the trail.:flipoff2:

nice mj's..adding mine..
http://i5.photobucket.com/albums/y200/osborste/me.jpg
http://i5.photobucket.com/albums/y200/osborste/acme%20woods/DSCF0091.jpg
http://i5.photobucket.com/albums/y200/osborste/acme%20woods/DSCF0027.jpg

Original builder was in NC, sold it to a guy in Indiana, then I bought it and brought it up here to Washington state.

Bought it to wheel it. 3 weeks in Moab starting the 26th of Aug.


I remember watching the build of that one as i was working on mine.

97+ Interior and Front Clip
Dana 30 and C8.25" with ARBs

http://i214.photobucket.com/albums/cc247/ogdawg05/100_1504.jpg

Updated

http://i878.photobucket.com/albums/ab341/xjcracker/IMG_7549.jpg

Nice! love the exo cage!

Updated

http://i878.photobucket.com/albums/ab341/xjcracker/IMG_7549.jpg

Do you have 4/5 pt harnesses?

How did you tie them into the cage?

I'm planning on exo-ing mine and just running tabs off the X-brace into the cab.

I don't want any internal tubing since space is already limited.

Do you have 4/5 pt harnesses?

How did you tie them into the cage?

I'm planning on exo-ing mine and just running tabs off the X-brace into the cab.

I don't want any internal tubing since space is already limited.

Ashman will axe this but....

No 4/5 point harness. I have the stock bench in there and factory harness. If I were to add the 5 point harness, there is a 'ledge' at the bottom of the back wall I would have made a simple loop on.

http://tapatalk.com/mu/3f91f9bc-589b-02a4.jpghttp://tapatalk.com/mu/3f91f9bc-58d8-1457.jpg

Heres my my mj..... I brought it all the way from tx to run fordcye and the rubicon....

Sent from my HTC Glacier using Tapatalk

http://i64.photobucket.com/albums/h196/turbomerkur/jeeps/comanchee1.jpg
http://i64.photobucket.com/albums/h196/turbomerkur/jeeps/comanchee.jpg

http://i64.photobucket.com/albums/h196/turbomerkur/jeeps/comanchee1.jpg

cool pic/time for lockers

http://i1041.photobucket.com/albums/b414/comanchemty/MOTOR-1.jpg
http://i1041.photobucket.com/albums/b414/comanchemty/1291349056508.jpg

Testing 38,5x16 TSL´s.......

http://forums.offipalsta.com/picture.php?albumid=123&pictureid=88322

Here is my 89 MJ with the 97+ conversion...

Not really meant to be a hard core wheeler but more a light wheeler/shop truck...

http://inlinethumb59.webshots.com/45178/2077017710049369580S500x500Q85.jpg

http://inlinethumb62.webshots.com/49533/2611701170049369580S500x500Q85.jpg

The Cowl Hood is made for the XJ/MJ and made from steel... They should be available thru any Offroad shop

So, been a while:

http://www.pirate4x4.com/forum/showpost.php?p=7241452&postcount=38

From 2010 @ the Cherokee crawl.

Mason Jar:
http://i16.photobucket.com/albums/b38/NSJAMES/Cherokee%20Crawl%202010/DSCF1316-1.jpg

Lions Den:
http://i16.photobucket.com/albums/b38/NSJAMES/Cherokee%20Crawl%202010/DSCF1414.jpg

Carnage.
http://i16.photobucket.com/albums/b38/NSJAMES/Cherokee%20Crawl%202010/DSCF1436.jpg

Carnage from Lions Den cost me a driveshaft, trans x-member, tore a shackle box off the frame, bent both mainleafs.
Now it's got outboarded XJ springs and went from 3.73's(stall-athon!) to 4.56's.

video:
Nate Wheeling Lions Den July 2010.wmv - YouTube (http://www.youtube.com/watch?v=gTn5Fmr3Nvo)

yes, I suck as a driver. No, I don't care about sheetmetal anymore, it makes me sad to think about.

http://i1041.photobucket.com/albums/b414/comanchemty/MOTOR-1.jpg
http://i1041.photobucket.com/albums/b414/comanchemty/1291349056508.jpg

MORE INFO!!!!!

this is cool!

http://i64.photobucket.com/albums/h196/turbomerkur/jeeps/comanchee1.jpg


remember u cant kick ass with one leg......

Bunch of upgrades since last pictures....
http://i138.photobucket.com/albums/q273/H3RESQ/eliminator/2011-12-04_10-56-24_249.jpg
http://i138.photobucket.com/albums/q273/H3RESQ/eliminator/moab3.jpg
http://i138.photobucket.com/albums/q273/H3RESQ/eliminator/2011-08-309513-20-249562.jpg

A little update since the last pics. Finally took it out last weekend and sheared the front output shaft in the transfer case clean at the yoke. Did alright for being open front and rear and only 4:11. Need to get the 5:13's in there and get then welded up.

http://i258.photobucket.com/albums/hh278/hondacivicdx92/2ef66343.jpg
http://i258.photobucket.com/albums/hh278/hondacivicdx92/cd8388e9.jpg
http://i258.photobucket.com/albums/hh278/hondacivicdx92/833aa47b.jpg

edit: Really need to bob the bed of this thing.

It's an MJ at heart.

http://img.photobucket.com/albums/v217/HazzzMatMan/Stage%205/312508_308322865848745_100000131026690_1448191_777 086177_n.jpg

Badass rig! Any better pics of the front tubework? :smokin:


It's an MJ at heart.

http://img.photobucket.com/albums/v217/HazzzMatMan/Stage%205/312508_308322865848745_100000131026690_1448191_777 086177_n.jpg

Search my username for the build thread. It's a few pages back in the cherokee section.

Bump since I finished the main part of my cage. Got too dark before I could take pics of the finished passenger side and bottom of the X behind the cab.

http://i888.photobucket.com/albums/ac84/MoparManiacCuda66/1990%20MJ/100_0089.jpg

http://i888.photobucket.com/albums/ac84/MoparManiacCuda66/1990%20MJ/100_0090.jpg

http://i888.photobucket.com/albums/ac84/MoparManiacCuda66/1990%20MJ/100_0091.jpg

http://i888.photobucket.com/albums/ac84/MoparManiacCuda66/1990%20MJ/100_0092.jpg

Shit's weak.:flipoff2:

I hope not lol

This is a Travel Channel video taken last summer and I am driving a nice little Commanche with a bit of custom junk. Late model doors and strikers, snorkel, 4.6 stroker, sucky 33" Baja Claws, lockers, blah, blah.

http://www.youtube.com/watch?feature=player_embedded&v=d2pqds9oRbc

not mine:

http://forums.exploringnh.com/picture.php?albumid=380&pictureid=5095

http://forums.exploringnh.com/showthread.php?p=272550