Yet Another 14 Bolt Bracket!

[Gravel Maker]

Available next Friday!

This is part of a fairly standard swap for when you add C&C hubs to a SRW 14 Bolt axle! The offset is small but needs to be addressed. This is being done alot to narrow the width of a standard 14 Bolt axle.....And, of course they will be bent:D! And only $50 too......

[theydontstop]

Available next Friday!

This is part of a fairly standard swap for when you add C&C hubs to a SRW 14 Bolt axle! The offset is small but needs to be addressed. This is being done alot to narrow the width of a standard 14 Bolt axle.....And, of course they will be bent:D! And only $50 too......

You said will work when adding C&C hubs to a SRW. Will these work on a C&C axle? As far as I know putting C&C hubs on a SRW makes the axle essentially a C&C axle, but aren't the flanges for the brakes in different places?

[Gravel Maker]

You said will work when adding C&C hubs to a SRW. Will these work on a C&C axle? As far as I know putting C&C hubs on a SRW makes the axle essentially a C&C axle, but aren't the flanges for the brakes in different places?


These are made to fit the placement of the flange on a SRW axle, when using a C&C hub. This is when you don't quite want the width of an SRW axle and you change the hubs to narrow the axle. These brackets will work with the SRW axle while using the C&C hubs because of the different offset they have! So get out your big hammers, we're bending again!

We are also making one to fit on a standard C&C axle (Yet another offset).....Also $50 before the pirate discount.....

[Gravel Maker]

Here they are.....

http://www.ruffstuffspecialties.com/gallery/albums/userpics/10001/normal_IMG_0939.jpg

You can see the offset is very small but they need to be BENT because they need to rest directly over the flange! Bending baracket wins again!

[riberware]

Can I use rotors for a 1984 k20 pickup with these brackets???

[Gravel Maker]

Can I use rotors for a 1984 k20 pickup with these brackets???

If it is a 4x4 K20.....