Crane Hi Clearance is back in biz!!

Thanks to all that supported Crane products over the years!

I'll be getting production up and running again asap.

Please email me if you have interest in specific products.

Joshua@cranehiclearance.com

www.cranehiclearance.com



Thanks
Josh

Do the knuckles come drilled and tapped for high steer?

Price shipped on 2 chevy 60 Kingpin knuckles to 67133?

Thanks for inquiring!!

Not only do they come milled, drilled and tapped (5/8 studs) but they have a interlock feature that allows use of any High steer arm, but for super strength, I sell an interlocking Hi steer arm.

Josh

60 to 78218:D

Just getting it all going again, some parts are in stock others could be a few months away from re-release.
Keep an eye on the web site for production schedules.

Thanks
Josh

price on 60 knuckles, C's and arms.. 95945 thanks...

Ygpm

price on 60 knuckles, C's and arms..

X2 to 97048, thanks stan..

Will Longfields super birfs work in these, what size tubes will fit in these, and can I turn the Longfields to a ful 45degrees with these??? thanks for the info, stan..

Sent you an email about the availability on D44 diff covers.

I guess I am a bit confused, I thought that Crane filed bankruptcy a few months ago, and that left several vendors and race teams hung out to dry.

Is this new Crane REALLY under new ownership or is this just a PR thing to revive the company?

Dirk

Pair D44 knuckles to 32246 with Studs

P1

Will Longfields super birfs work in these, what size tubes will fit in these, and can I turn the Longfields to a ful 45degrees with these??? thanks for the info, stan..

X2 plus quote for C's and knuckles to Sacramento ca 95826

Thanks Andrew

I will be needing a 20 and 44 diff cover and some high steer arms to 92508 when you get production going. Best of luck to you, management can make all the difference in the world.

Hi Fellows, the web site is updated and lots of product is now in stock.
Dana 44 Covers in stock
Dana 44 Outer Interlocking knuckles In stock
Dana 44 Interlocking Hi Steer arms (new and improved) In stock
AMC 20 Covers In stock
Dana 60 Covers sold out, but more are in the works.
Dana 60 Outer King pin Interlocking Chromo Steel Knuckles are at machining
Dana 60 Interlocking Hi steer arms are at machining.
D44 5/8" Stud and cone kits are in stock
D44 Spindle studs in stock.

Thanks
Josh

www.cranehiclearance.com

Josh,

You side stepped Cue/Dirk. Can you answer the questions?

Did not mean to dodge any part of this.

I address many of your question in this thread...


http://www.wickedmag.com/forum/viewtopic.php?p=5727&sid=5c18d1d0e2567be330e8ccc36e98840d

To assure everyone, this is no PR stunt, I own the company and I'm doing everything I can to get it back up and running again.

Thanks
Josh

Did not mean to dodge any part of this.

I address many of your question in this thread...


http://www.wickedmag.com/forum/viewtopic.php?p=5727&sid=5c18d1d0e2567be330e8ccc36e98840d

To assure everyone, this is no PR stunt, I own the company and I'm doing everything I can to get it back up and running again.

Thanks
Josh

Sorry guys I probably should have mentioned that Josh posted over on wickedmag about this.

It does seem to be legit.

Dirk

Wow, sounds like quite an undertaking.. good luck ressurecting the company!

How much for a set of chevy D44 knuckles w/ interlocking and w/out arms shipped to 92054?

Astar, PM sent

How much for a set of high steer arms for a stock D60? shipping to 31025. thanks and good luck:smokin:

just ordered my knuckle and hi steer arm :)

got the stuff today:
http://i2.photobucket.com/albums/y5/cuongnutz/SAC/DSC00430.jpg
http://i2.photobucket.com/albums/y5/cuongnutz/SAC/DSC00429.jpg
http://i2.photobucket.com/albums/y5/cuongnutz/SAC/DSC00422.jpg
http://i2.photobucket.com/albums/y5/cuongnutz/SAC/DSC00425.jpg
http://i2.photobucket.com/albums/y5/cuongnutz/SAC/DSC00421.jpg

Dana 30 covers are in stock.

Dana 44 covers are in stock

Dana 60 covers are in stock

AMC 20 covers are in stock

Chrysler 8.25 covers will be in production in about a month.

Same for the Dana 35 cover.

D44 interlocking outer knuckles are in stock

D44 interlocking hi steer arms are in stock (redesigned/improved)

D44 standard hi steer arm are in stock

Spindle studs are in stock

Stud and cone kits are in stock

Dana 60 interlocking King pin Chromo steel outer knuckles are in stock

Dana 60 interlocking hi steer arms are in stock

Dana 60 standard and double ended hi steer arms will be ready in about 2 weeks.

Dana 60 GM and Ford Spindles are in stock

Dana 60 GM and Ford Spindle studs are in stock

Dana 60 king pin rebuild kits mini and complete are in stock.

Lower king pin caps are in stock.

Dana 60 hi clearance center sections will go into production when I get several prepaid orders

Dana 44 hi clearance center sections Same.

All Made In USA.

Thanks
Josh
303-917-4851

Glad to hear things are moving forward for you Josh.

Say you going to be in Texas next weekend??

dana 60 high steer knuckles ford style, high steer arms, dana 60 diff cover and 14 bolt diff cover if u have price. thanks shipped to canada s7k 5t3 thanks

Josh,

Price for a crane dana 44 diff cover? shipped to 93015.

Thanks,
Joe

D60 knuckles for ford 78-79. And separately...arms for the same. Price?

Thanks for the inquiries!
PMs sent

Josh

Do you sell arms for Stock Ford 78-79 Knuckles? Price

I've already sold out on the OE non-interlocking d60 arms before I could advertise them.
I should be seeing more in about a week or two.

These new arms are fully corrected and be installed with the OE steel cap or with the Crane aluminum signature caps.

PM sent.

Josh

http://http://www.pirate4x4.com/forum/attachment.php?attachmentid=325850&stc=1&d=1190039264

Call for Prices 303-917-4851

Josh

Could you post pictures of your D60 center section you are planning to release?:D

D44 & D30 covers to 62206.

na83cj PM sent.

Jtruck pix not available yet...stay tuned...

http://www.cranehiclearance.com/crane1_023.htm

In production soon.

Josh

D44 interlocking outer knuckles are in stock

D44 interlocking hi steer arms are in stock (redesigned/improved)

Stud and cone kits are in stock

to 23456 please

D44 cover please.

Jakerngr, PM sent!
D44 covers are in stock, call 303-917-4851 to place order.

Thanks
Josh

How much and how soon for the Dana 60 center sections?

Price please.

(2) knuckles
Ford 60

RS60 spring of 08 and cost not known yet.

Jethrodeg PM sent.

Josh

Thanks Josh but I am looking for just the knuckles not the kit. How much would a pair of knuckles go for?

Quote on Passenger Standard 60 Arm, drilled for tre and a stud kit to 12477 Thanks

KrazYJ PM sent.

Thanks
Josh

GM D60 Kit shipped to 77044, TIA

Drillpipe, PM sent.

Thanks!

Can I have a price on a pair of D60 knuckles shipped to 13790, and also the complete kit shipped to 13790?

Also is there any issue running them without the interlocking arms?

Zeeto, the chromo steel Crane outer knuckles only work with the interlocking arms, being as there are no steering linkage mounts without the interlocking arms.
The stock replacement ductile Crane King pin outers will work with most arms.
Those are in production, In fact I'm picking up the castings this week, then off to machining.
Are you after ford or GM spindle pattern?

Josh

Josh, I'm looking for GM spindle...
Thanks
Chris

Pm me price on the D60 knuckles shipped to a bus addy 35217 please , also post a larger pic of that avatar !!

Josh, I'm looking for GM spindle...

Never heard back on a quote...let me know.
Thanks
Chris

Zeeto, sorry I was out of town, Picking up castings/dropping off patterns.
Please clarify, you want the Crane OE replacment outer knuckles and non interlocking arms?
Or you want the kit as listed above?
In GM spindle pattern.

Josh

Zeeto, sorry I was out of town, Picking up castings/dropping off patterns.
Please clarify, you want the Crane OE replacment outer knuckles and non interlocking arms?
Or you want the kit as listed above?
In GM spindle pattern.

Josh

Np, just checking back on it.

I'd like to get a price for the OE replacement outer knuckles but w/o arms, as I already have arms, and then a separate price for the kit that was listed above. I'm not positive which route I would go yet...
Thanks

Np, just checking back on it.

I'd like to get a price for the OE replacement outer knuckles but w/o arms, as I already have arms, and then a separate price for the kit that was listed above. I'm not positive which route I would go yet...
Thanks

Checking back on this...still haven't received a quote.

Zeeto, PM sent

Josh

can i get a price on a dana 44 and a 60 cover shipped to 95603 thanks

KJframe, PM sent

Free shipping for the Month of December.

Josh

pmed price of d44 diff cover to 28227?
thanks

How's production, Josh?

Most everything is in stock.
What are you after?

McCain? says it all.
None are worth a poop.

Josh

Most everything is in stock.
What are you after?

Josh



Dana 60 knuckles.

Please quote a set of Chevy king pin chromo knuckles, no arms to 45318
Thanks
Justin

Any updates on your RS60 center housing? Longfield D60 birfield shafts work in conjuction with you C's And Knuckles? :)

d60 cover to 23114

They are at machining should see them early June.
I'll keep you posted.

Josh

Grand, PM sent

Josh

price on a couple of high steer arms for a chevy 60. thank you.

it is june. anything on the RS60?

http://i273.photobucket.com/albums/jj207/cranehiclearance/RS60smachined.jpg


Machining/pressing tubes today, setting up gears, arb. 35 spline 5.38s

Josh

http://i273.photobucket.com/albums/jj207/cranehiclearance/RS60smachined.jpg


Machining/pressing tubes today, setting up gears, arb. 35 spline 5.38s

Josh



Me likey! What is one of those going to set me back? I'm local.

Thanks for inquiring!! These are sooo exciting to finally be in hand.

Until we go into full production (very soon) and with that learn what the costs are based upon quantity per stock order.

Basically send a PM with your phone # and info an I'll get you on the list to call back when I have that info.

Thanks
Josh

In Denver?, stop by and see the progress.

how much for d30&d44 covers to 74073?

http://shop.cranehiclearance.com/product.sc?categoryId=8&productId=21

The Crane shopping cart is up and running.

Thanks for inquiring, everything is in stock.

Josh

PM Sent! Thanks!!

Bump for Josh! If it matters to some of you, and I know it matters to me, Crane supports LAND ACCESS!!! Crane can proudly call itself a member of the U4WDA, which fights hard to keep UT trails open!

Go Crane!

2 Crane D60 Ford knuckle, with interlocking arms shipped to T2V 2N2 (Canada)..

Are they in stock???

P.S. What is inside the "mini install" kits?? All kingpin bearings and races??

Tks,

http://shop.cranehiclearance.com/product.sc;jsessionid=6B9997F86D996E16533EAAF1DE8A 2DC9.qscstrfrnt04?categoryId=5&productId=12

Kits are in stock, shipping is through the cart.
Mini kits include the nylon conical bushing, lower bearing and race upper and lower seals.

Thanks
Josh

Josh, whats yo ph#??

You said you've got the stuff in stock...Wondering if you can get it to a buddy of mine in DENVER before this Friday??

Gis, Your friend picked up the premium outer knuckle kit 10 minutes ago.
Thanks. He works 5 minutes from the shop.

Thanks for the order!

Josh

Kick ass! Thanks for the awesome service Josh, really appreciate you going out of your way to help out.

Joe

Is the D44 High Pinion going to ever happen?

I have castings, just need to justify the cost of set up for the machining.

But in answer to your question, yes, but not anytime real soon.

Josh

Bump for Josh. Got some 60 arms from him today and as usual, he's always a great guy to do business with. He's also done fab work for me in the past that has been top notch.

Need a price on diff covers shipped to 99337 please
D60 and 14FF

Stuff looks great on the project here in the shop. Be sure to keep watchin to Crane stuff on Xtreme into next season. Thanks for all you help with that steering 14 bolt.

Ian, thanks for the opportunity. Let me know if you need anything else!!

Josh

how much for a cover for a D30 & D44 shipped to 94577

http://shop.cranehiclearance.com/product.sc;jsessionid=6B9997F86D996E16533EAAF1DE8A 2DC9.qscstrfrnt04?categoryId=5&productId=12

Kits are in stock, shipping is through the cart.
Mini kits include the nylon conical bushing, lower bearing and race upper and lower seals.

Thanks
Josh

Is there a way I can buy just the arms? It doesn't seem to be an option on the website.

price for D60 inner Cs, and outer knuckles with hi-steer arms along with and kingpin kit and studs to 76008.

hi josh, i just ordered a set of d44 inner c's from you last thursday and got them in the mail today, WOW! That was super fast, and they look tough. I will be ready to order the knuckle and high steer arms soon, and was wondering if you plan on making any armless knuckles for the 44? I have been considering running full hydro up front and i really like the clean look of the armless. Thanks again, the parts are awesome

how much for a pair

Dana 60 cover to 77002

quote on high steer knuckles and arms for 79 HP ford D60, please. Also want an "abuse your junk" T shirt.

I just ordered a set of arms from ORD!