|
DSI 06-04-2002, 09:38 PM front driveline in a 2k1 superduty, it's HUGE what's the max allowance for this joint?? dealer's telling me that the knocking noise i have in 4wd is du to driveline bind, the thing's @ 10-12 degrees max! bigdude 06-05-2002, 05:40 AM Originally posted by DSI front driveline in a 2k1 superduty, it's HUGE what's the max allowance for this joint?? dealer's telling me that the knocking noise i have in 4wd is du to driveline bind, the thing's @ 10-12 degrees max! If it's a 1350 series CV I believe it can handle much more tan 10-12 degrees. But where are those guys who build these, they'll know for sure. mytzlflick 06-05-2002, 05:51 AM if its the cv knocking you should have some visible marks to indicate where it is hitting. if in doubt put it up on a hoist and spin the front driveline over, if its not close when the suspension is maxed thats not the problem. Tankota 06-05-2002, 10:39 AM Max angle for a 1350 is 20 degrees max angle for a 1410 is 37 degrees HOWEVER, good luck finding a yoke that can handle 37 degrees:( in fact, most stock cvs can't handle hardly anything for an angle. Maybe jess will chime in here and give you the info. 1350 3 5/8" end to end 1410 4 3/16" end to end both have 1 1/16" caps | |