Handful of Cream
06-20-2007, 07:37 AM
Poison Spyder Customs King pin high steer arms for sale. I have installed them but never hit the road or off road.
They also are drilled for (tre's)
Off there site:
Toughness - All Arms are built from 1 1/2", cold-rolled steel, powder coated, not raw, no enamel.
Quality - Parts are fully machined. Metal integrity is not compromised through less expensive cutting processes, like flame cutting or plasma cutting.
Design - Poison Spyder Customs arms are built with a twist. The twist locates the heim joints at a 7 � deflection at static position. This prevents binding of the steering during flex, which is commonly found with the use of flat-milled arms that follow the stock angle of the knuckle. An additional feature is five locating holes. This allows the arm to be used with forwardly-stretched wheelbases, and gives a variety of turning radius options. All arms are machined with round radiuses to prevent stress points that would be created through sharp angled breaks in form.
Poison Spyder Customs high steering arms have a unique keyway that interlocks the 7/8 inch spacer and the high angle arm. This minimizes sheer at the stud between the two connecting surfaces. This interlocking design is built into all Poison Spyder Customs arms.
https://www.spydercustoms.com/parts/steering/Imga0041_med.jpg
ship on your dime I'm in Highlands Ranch, CO
Asking $200.00 OBO
Thanks
Chris
They also are drilled for (tre's)
Off there site:
Toughness - All Arms are built from 1 1/2", cold-rolled steel, powder coated, not raw, no enamel.
Quality - Parts are fully machined. Metal integrity is not compromised through less expensive cutting processes, like flame cutting or plasma cutting.
Design - Poison Spyder Customs arms are built with a twist. The twist locates the heim joints at a 7 � deflection at static position. This prevents binding of the steering during flex, which is commonly found with the use of flat-milled arms that follow the stock angle of the knuckle. An additional feature is five locating holes. This allows the arm to be used with forwardly-stretched wheelbases, and gives a variety of turning radius options. All arms are machined with round radiuses to prevent stress points that would be created through sharp angled breaks in form.
Poison Spyder Customs high steering arms have a unique keyway that interlocks the 7/8 inch spacer and the high angle arm. This minimizes sheer at the stud between the two connecting surfaces. This interlocking design is built into all Poison Spyder Customs arms.
https://www.spydercustoms.com/parts/steering/Imga0041_med.jpg
ship on your dime I'm in Highlands Ranch, CO
Asking $200.00 OBO
Thanks
Chris