|
Behemoth60 06-26-2007, 10:34 AM Just took delivery of Longfield 30 spline Chromoly super set of axles... custom length inners with a long spline short side for my 70 series with factory cable locker. Very nice. Question is... are these already cryo'd? Would they benefit from a cryo treatment? Thanks! Peter Straub orangefj45 06-26-2007, 10:38 AM not sure. but i do know that bobby is stuck in norcal at a repair shop with his motorhome. hopefully they'll get it fied for him today so he can get back home. i'd send him and email about this. Eskimo 06-26-2007, 11:04 AM No, they're not cryo'd, they are 4340/300m. Just run 'em. You'll break everything else before those go. woooody 06-26-2007, 12:02 PM Peter When Bobby used his axle breaking machine, I think the 27 were just a hair under stock Dana 60's, and the 30's were a bit better. Honestly, I wouldn't bother for your 70. If it was tippy, and you still had stock axles, yeah, maybe. Phantom-4x4 06-27-2007, 11:06 AM The inner of the short side has long splines but of the normal ones???... ...my 3rd member with a factory locker, use a long spline setup, It is possible to use Superset 30 spline in them??.... http://img509.imageshack.us/img509/4120/dsc01655qo0.jpg Thanks.! Ed. Behemoth60 06-27-2007, 11:32 AM Greg Bowie of G&S cruiser Parts had a custom run of inner axles made for a very specific purpuse... 70 series axle width with factory cable lockers (which uses the same long spline as you would need for that electric locker) with the 30 spline outer to fit the longfield birf. God help you finding a spare if you break an inner one of these axles. So, no, the Superset 30 spline won't work for a factory locking diff. You need a custom axle (the long side on the front has the long splines for the locker) Peter Straub Longfield 07-02-2007, 09:12 PM Greg Bowie of G&S cruiser Parts had a custom run of inner axles made for a very specific purpuse... 70 series axle width with factory cable lockers (which uses the same long spline as you would need for that electric locker) with the 30 spline outer to fit the longfield birf. God help you finding a spare if you break an inner one of these axles. So, no, the Superset 30 spline won't work for a factory locking diff. You need a custom axle (the long side on the front has the long splines for the locker) Peter Straub Yes we do have the long splines custom inners for your cable an E-lockers in stock now. They are $125.00 or $660.00 for the hole 30 spline set. Yes all of our shafts,birfs an u-joints are cryo. treated. Longfield 07-02-2007, 09:13 PM not sure. but i do know that bobby is stuck in norcal at a repair shop with his motorhome. hopefully they'll get it fied for him today so he can get back home. i'd send him and email about this. Yes we got the motor home fixed and on the road an got home OK. Thanks | |