|
ukjeeper 06-06-2002, 01:58 PM Looking to connect up a "4 flat" connecter to my '89 YJ so i can pull a trailer. Anyone done a write up, or does someone sell an "inline" adapter? BTW, Search results: http://www.pirate4x4.com/forum/search.php?action=showresults&searchid=162718&sortby=lastpost&sortorder=descending Kendo 06-06-2002, 02:41 PM Off the 4 wire plug connector: Yellow - left turn signal Green - right turn signal Brown - parking lights White - ground Easy as pie, it'll take you about 15 minutes. Don't know about the inline adapter, but you don't really need it with a YJ. ukjeeper 06-06-2002, 04:36 PM Cool, thanks Kendo.:smokin: Dan-H 06-06-2002, 05:01 PM I just went to wallymart and bought a 4 foot 4 wire flat plug kit for 3 bucks and spliced it in. They even label the wires for you. If you don't want to splice wires, here is a harness for about 20 bucks. The stealer wants about 40 for the same harness. http://www.accessconnect.com/trailerwiring.htm ukjeeper 06-06-2002, 06:16 PM Dan, thanks, but mines an 89. They don't make 'em for before 91 (even shows that on your linked page). Kendo. looked again (i was in rush to get out of the office). you are talking about the wires coming from the 4flat. i'm talking about the 3 wires in the Jeep harness headed to the left rear lights. Not the same colours as the colours you spoke of. Ah, well. a buddy of mine still has the FSM for the '89. If its not in my Chilton (and i bet it ain't :D), the wiring diag will be in there. thanks again for the help. | |