so its time to get the c6 i put in able to shift. i am only looking to spend $100. So is there a car at the junk yard i should look for, or is there a kit out there that dosnt cost some coin.

how about the mustang floor shifter 80's era, Plentifull and cheap at the junk yard

didnt those have OD trans?

Early 80's/late 70's ones were a 3 speed.

well i went to the Junk Yards yesterday all 10 of them. and couldnt find any cars with a floor shifter.:mad3: So i started looking onlin at shifters and the cheapest i found was a little under 200$. which i could do but would have to go into the aluminum radiator fund.

Has anyone ever made a floor shifter?
all my tranny has on it is one shifter rod, i am missiong some parts?
any pics of your set ups?

Check ebay or a mustang forum.

If your gonna spend $200 buy an aftermarket shifter. No a junkyard piece.

I ended up getting a B&M used on here for $75. It works like a champ. Keep your eyes open. I see aftermarket shifters used all the time in the ~$100 price range.

B&M Unimatic shifters are just over $100 from Summit. I've got one in my F-100. They are tall, and better suited to a truck anyway...

http://store.summitracing.com/partdetail.asp?autofilter=1&part=BMM%2D80775&N=700+300224+115&autoview=sku

83-84 2wd rangers with an auto are a 3 speed with a floor shifter... so that is also a possibility.

Build youre own that way you can customize throw,reach etc.

most ive looked at are around $100 brand new at schucks, and baxters.

i built my own, and it is locked in each gear exceped 1st and 2nd gear.
ist kinda redneck but it didnt cost 200 bones and i dont have to worry about my kid kickin it into gear

I'll sell ya a stock 2005 Mustang shifter for $20.

how do i find out if i need a forward shifting of a reverse shifting shifter? going to order the one from summit......

Thats how the shift pattern is set up you can get either one you like.

Reverse shift pattern is for use with a reverse pattern valve body. Commonly a race only patten. Unless you have a -3 shift kit in your trans use the standard pattern. The two are not interchangeable.

My friend grabbed a B&M starshifter for just under $100 for my c6. Blew me away, just showed up with it one day. To be fair, he got it at a sporting goods store that was shutting down most of their auto parts department.

I bought a $45 special at Pep Boys about two yrs ago. Had to cut and weld a couple of the brackets it came with to get it to work on my C6. I'm thinking about doing something better, but it works for now.