|
Really Sick Rigs 10-10-2001, 01:17 PM I don't know if they have a specific name, but the spacers for heim joints (mine are 3/4") that allow the joint a full turning radius for my 3-link. Thanx <IMG SRC="smilies/beer.gif" border="0"> coyote 10-10-2001, 04:11 PM Get the plug with a magnet, then when you drain your system you get the filings.... RoCkSkuLLz 10-10-2001, 04:34 PM Call Avalanche Engineering. They sent me a few with my hi-steering stuff... dirtrod 10-10-2001, 04:44 PM I use the thinwall steel tubing that is used for hydraulic lines on heavy equiptment, I cut it to length with a chop saw...real cheap YellowSub1962 07-15-2002, 07:23 PM I have a buddy looking for some spacers for a 3/4 heim also...anyone have any other suggestions/ sources? :usa: PIG 07-15-2002, 08:40 PM Originally posted by Yellowsub1962 I have a buddy looking for some spacers for a 3/4 heim also...anyone have any other suggestions/ sources? :usa: Originally posted by 2hiToy I don't know if they have a specific name, but the spacers for heim joints (mine are 3/4") that allow the joint a full turning radius for my 3-link. Thanx <IMG SRC="smilies/beer.gif" border="0"> We should have some coming in soon. Also, spidertrax just came out with some. It looks like good shit, $$ though. YellowSub1962 07-16-2002, 08:39 AM how soon? I'm talking in the next week or two I need them... :usa: PIG 07-16-2002, 04:45 PM Originally posted by Yellowsub1962 how soon? I'm talking in the next week or two I need them... :usa: Not that soon sub. ETA will be 4-6 weeks. StinkBug 07-16-2002, 04:49 PM www.independent4x.com my buddy just ordered some from matt a couple days ago and he said he had em in stock. Matts a great guy to deal with too. If hes not there when you call leave a message and he'll call you back, hes been runnin around a lot lately gettin ready to move the shop. BTW Matt is on the PBB as well so you'll be supporting a board member. Dallas CoryL 07-16-2002, 06:05 PM They are called misalignment bushings or misalignment spacers. Most desert racing shops will carry them. Check out any of the places on Camburg Engineering's Link page. Camburg's Links (http://www.camburg.com/links.html) | |