|
Benny 06-06-2002, 11:28 PM Yes, I searched... I am trying to time my friends 86 4runner. Its EFI, I cant find the connectors that I need to cross in order to set the timing. I have the rest figured out. :smokin: Where is the connectors? Thanks SeaBass44 06-07-2002, 08:30 AM buy that lil $15 book at autozone it comes in handy for allot of things. gnob 06-07-2002, 08:34 AM connection is on the driver side fender under the hood near the headlight, the two wire, stuck in the plug on the inside of the fender. Benny 06-07-2002, 05:07 PM Originally posted by gnob connection is on the driver side fender under the hood near the headlight, the two wire, stuck in the plug on the inside of the fender. OK, I know where that is. Thanks. He has a Hanes manual. While it gives very good detail of HOW to adjust timing... It does not tell WHERE the plug is. The book actually says the connectors are in a fuse panel looking thing... But on the inside fenderwell, there is 2 connecters attached that dont go anywhere. they are capped off. its the 2 wire conector here, correct? Arnold 06-07-2002, 05:23 PM This thread from ORC has some good pics that should help...http://tellico.off-road.com/ubbthreads/showflat.php?Cat=&Board=offroadtoytruck&Number=794243&page=0&view=collapsed&sb=5&o=0&fpart=1#Post795420 :) | |