Got the shafts in,top qualty shit.

No vibes at all I could even drive in 4WD on the hiway <IMG SRC="smilies/rolleyes.gif" border="0"> <IMG SRC="smilies/biggrin.gif" border="0">

<IMG width=640 height=480 SRC="http://www.pirate4x4.com/ubb/uploads/Sep16$06.jpg">


Rob

It is high time you posted some pics!! <IMG SRC="smilies/crybaby2.gif" border="0">

Glad they got there -glad they worked well for ya - Jess

umm think you have enouhgt pinion angle????

His pinion angle looks fine for a reverse cut axle <IMG SRC="smilies/usa.gif" border="0"> <IMG SRC="smilies/usa.gif" border="0">

Originally posted by Michael Alexander Britts...American:
<STRONG>umm think you have enouhgt pinion angle????</STRONG>

It's perfect,It is twisted up on some rocks in the pic,can't you see the right spring almost inverted,it's hard to tell from that angle

The pinion is pointed a degree or two below the t\c output

Here is a pic of the rear on flat ground,and one of the front.


<IMG width=640 height=480 SRC="http://www.pirate4x4.com/ubb/uploads/Sep17$01.jpg">

<IMG width=640 height=480 SRC="http://www.pirate4x4.com/ubb/uploads/Sep17$05.jpg">

I think that I would cut the u-bolts down a bit. <IMG SRC="smilies/biggrin.gif" border="0">

JETTECH,

That looks so SWEET...what angle did you have to set the diffs at??

Originally posted by krcruiser:
<STRONG>JETTECH,

That looks so SWEET...what angle did you have to set the diffs at??</STRONG>


18 rear 14 front

all we need to do is to have jess start making some shafts like this!

http://www.wt4wheeling.com/welndmn/images/misc/bigshaft.jpg

mark- that is a 1710 tag shaft 2 1/2 16 spline and can be adapted to your common atlas via a huge ass adapter - but there in the works!