|
DAB 06-08-2002, 12:26 PM If I make my crossmember removable will I be able to install a later tlc 4 speed trans in place of the 3 speed without pulling the eng? I am putting the eng in with the 4 speed bell housing first because I am waiting for t/c parts. thanks. cruiserbrett 06-08-2002, 02:02 PM I am guessing you are talking V8, so if you are talking about the rear t-case crossmember, you will need to move it back about 3-4 inches when you put the 4 speed(Toyota) in the truck, same goes for an sm465 and sm420. so, yes you will need to move the mounts for the cross member back once the longer tranny is in. -Brett DAB 06-08-2002, 03:24 PM thanks for the reply. I am not putting v8 just a later year f eng 1973 with a 75 tlc 4 speed into a 65 fj40 and was told that I can't even service the park brake because the crossmember is in the way so I would think that I couldn't put the trans in after the eng is in. I am waiting for some parts to hook my 3 sp t/c to the 4 speed trans but wanted to get a head start and set eng in first. thanks | |