Sorry, what I did is I just took out one of the body pucks that comes stock and went down and got the size diameter that the stock pucks and washers are. I then cut the pvc into 2 inch sections jacked the cab up and stuck them in and tightened them down with 2 inch longer bolts. I used the black pvc and if I recall it looked to be 3/16-1/4 inch thick. With only a two inch body lift it works fine, I've never had it crack or shift on me so it works well for me. On my other toyota I used the couplers that you use to connect two pvc ends together. I think they were white and are harder than just regular pvc pipe. they worked well too and were close to 2 inches long. Just get creative and save yourself the money. Just my .02 from a poor college student

saw this in the wanted add's for a body lift Ill leave the postie
innonimus Fawkin scarry what people will do!!!!!

:eek: :eek: :eek: :eek: :rasta:
good grief.:(

talk about 1/2 ass engineering!!! body lifts are bad enough as it is!!!!:eek: :eek: :eek: :eek: :barf: :barf:

Man, I've seen guys lift trucks with landscaping timbers from Lowes, but this definately tops that!!!

:usa: :beret:

Originally posted by NC ZUK GUY
Man, I've seen guys lift trucks with landscaping timbers from Lowes, but this definately tops that!!!

:usa: :beret:

All you got to worry about is dry rot and termites then.. Fawker!!! LOL:eek: :eek: :eek: :eek: :eek: :eek: :D

We have a local retard up here who stacked a foot, yes, 12 inches, of washers onto a 1/2 thick shaft, tacked them ALL together, then bolted each body lift "shaft" into the truck with all thread!:eek: :eek:
12 INCHES OF WASHERS!!!!
Runs the first edition of 44" Ground Hawgs ever made under the POS.
If some one else has seen worse, I don't want to know about it!

One of the most ingenuos thing's I saw was a guy that used Hockey pucs

better off using washers welded together, and save the pipe for your sprinker system:)

:eek: :eek: :eek: now he must be really poor, really stupid and have a death wish.:nuke: :nuke:

OK, how about this? 4 chunks of I-beam 6" long under each spring for a 6" lift? I chewed his ass the day I saw it and told him how dangerous it was and that if they didn't get removed I was going to knock them out myself. So he went home and welded them to his leafsprings!:eek: :eek:
Wanna know the best part? This was the same guy that used the 12" of washers for his body lift. This was on his "daily driver" though. The one with the washers was his "extreme trail rig." Whatever.

Originally posted by twistedmetal
OK, how about this? 4 chunks of I-beam 6" long under each spring for a 6" lift? I chewed his ass the day I saw it and told him how dangerous it was and that if they didn't get removed I was going to knock them out myself. So he went home and welded them to his leafsprings!:eek: :eek:
Wanna know the best part? This was the same guy that used the 12" of washers for his body lift. This was on his "daily driver" though. The one with the washers was his "extreme trail rig." Whatever.

no way anyones that stupid.....I want pics or I call BS:p :p :p

Originally posted by SeaBass44


no way anyones that stupid.....I want pics or I call BS:p :p :p
ive seen the i beam trick around here in WV.also saw a guy just keep putting leaves together under an old chevy, had like 25 leaves for 12 " lift. wasnt dangerous like the washers and i beams, but it rode like a go cart!!:rolleyes:

No can do on the pics. This was all about 3-4 years ago. BUT!!! A new rig just rolled into town with that same lift kit!! I'll get pics for ya. This one has the I-beam block rear, and then lift blocks for te front out of C-channel with a plate welded on top. Couldn't even splurge for actual box tubing! Now thatr's what I call High Quality!