anybody know how much a 59" wide rear toyota axle weighs including third member?

how about with a disc brake setup instead of drums ?

Toy 8"
Front 270lb
Rear 220lb

others.....


Dana 44
Front 300lb
Rear 250lb

Samurai
Front 179lb
Rear 134lb

this makes me very very happy. my new rear tera 60 weighs in at 250 pounds complete with 4 link mounts.

40 spline gun drilled full float axles
aluminum hubs
vented rotors
willwood calipers
cro-molly spool
.250 wall cro-molly axle tubes.

cool. what does the front weigh camo ?

- jack

Originally posted by camo
this makes me very very happy. my new rear tera 60 weighs in at 250 pounds complete with 4 link mounts.

40 spline gun drilled full float axles
aluminum hubs
vented rotors
willwood calipers
cro-molly spool
.250 wall cro-molly axle tubes.

So, do you plan on breaking that set up too?:D

Originally posted by Arnold


So, do you plan on breaking that set up too?:D

yes i do. :D

jack

the front is still has some parts that are being figured out so it is not done yet. but it will weigh more do to all the cast parts as well as a ARB.

Originally posted by camo
this makes me very very happy. my new rear tera 60 weighs in at 250 pounds complete with 4 link mounts.

Cool....didn't get the aluminum center section and aluminum tubes?
Jay

Originally posted by ROKTOY


Cool....didn't get the aluminum center section and aluminum tubes?
Jay

nope. i am not sure if the aluminum ones are even real production units or if they were just made as one offs. but at 250 lbs i am pleased with my effort of keeping it light.

Yeah, 250 is very impressive indeed!
Jay

Did you break the 40 spline non-gun drilled axles?

whats next? Throw some reduction hubs on for a little added "beef" :flipoff2:

How does an aluminium hub work? You would think it would be the weak link.

Just for comparision my "british" 60 is 400lbs+

Ron

no i did not break a 40 spline non gun drilled. i gun drilled them just to save weight.

no the hub is not the weak link. it uses a steel drive plate. it is the same hub sandy cone builds for all the desert race trucks that run 700 hp and do 130 mph in the desert. the weak link is the r/c gear since i am running on the coast side of the gears.

i will get some pics up latter.

what's the ETA of getting the new axles installed ?

- jack

Originally posted by camo
this makes me very very happy. my new rear tera 60 weighs in at 250 pounds complete with 4 link mounts.

40 spline gun drilled full float axles
aluminum hubs
vented rotors
willwood calipers
cro-molly spool
.250 wall cro-molly axle tubes.

that doesn't sound like it will work. Better send it to me, so i can scrap it.

How much glitter did you have to sell for this setup?

Originally posted by morpheus
what's the ETA of getting the new axles installed ?

- jack

spent last sunday cutting off the old 4 link mounts off the frame and i am building new 1 5/8 .250 cro-mo link bars with 1" x 1.25 heims. should be ready for the hammers this weekend.

Originally posted by BornInAJeep



How much glitter did you have to sell for this setup?


tons :D

pics of my junk here.

http://www.pirate4x4.com/forum/showthread.php?s=&threadid=60246

Originally posted by camo



but at 250 lbs i am pleased with my effort of keeping it light.

Ya, gotta keep it light so its flopping it back onto rubber is a one man deal :D :D

actually i am working on perfecting my 360 degree barrel rolls so i can avoid that issue altogher. :flipoff2:

SOme things are shockers, some a WOWzers, why is it that doesn't fall into that catagory,lol.....

I just gotta see that thing in person...