Does anyone have a picture of a CJ front end with waggy springs and a reverse shackle [stock springs preferred]?

I am about to weld my waggy springs under the front of my CJ and the castor is at 10 degrees[thats too much], I would like not to have to run shims or rotate the pinion [1/4 shim would get me at 6 degrees], and am wondering how low I can weld the front hanger [to get the short side offset on the springs to the front you have to turn the springs around and that points them uphill quite a bit.] I can gain a little less castor by placing the rear shackles thru the frame I am also thinking [e.g. MORE style].

Big thanks. David