im buying a project blazer and the guy said that the guy he bought it from said it had a 6" lift, but he thinks it is a 4. this is what he told me:

I was told it was a 6 inch lift, but the blocks in the rear are only 4 inches tall.
On top of the blocks there's 6 leafs.
The front has 5 leafs.
The distance from center of front hub to top of wheelwell is 27.5 inches on average. If you know the stock specifications that will tell you the current lift.

can anybody tell me if this is a 4 or a 6" lift?

that dont seem to bad for 300.

from the arch of the front springs, kinda crappy pictures, it looks like a six, i had a 2 blazers one with a 6inch lift and one with a 4inch lift. the 4inch lift springs are more kinda straight and those seemed more arched. also i had blocks in the back too, and it only had a 4inch block, it had two helper springs or whatever you call those things on the bottom of the stock rear springs and each of those were a inch thick