|
Brawler 06-11-2002, 05:02 PM Did a search and found some good info as to why they wont work. Seems that the flanged part of the axle bolt pattern is different. Couldn't you just fill in the holes on the hub or axle flange and re-drill and tap them to fit? Is it this simple ( nothing ever is ) or am i missing something? My reason for asking is i can get a d70 but it is from a dually and i want to be wider like the C&C 14 bolt. BadDog 06-11-2002, 05:06 PM My reason for asking is i can get a d70 but it is from a dually and i want to be wider like the C&C 14 bolt Huh? Dually D70 is much wider than a C&C C14FF. I've got no idea about the realities of crossing those pieces but, that statement confused me. Brawler 06-11-2002, 05:08 PM Maybe i'm using the wrong terms. I want to have the 14 bolt width of 67"- 69", i thought the d70 dually was like 64". BadDog 06-11-2002, 05:23 PM Well, I don't remember the wms on each off the top of my head and I can't find it anywhere. But, unless my head is completely scrambled, it works like this, from narrowest to widest, C&C, SRW, and then dually D70. Seems like there is roughly 4" between each of them. If I'm wrong I'm sure it won't take long for someone to flame me, err, I mean correct me... :D | |