|
bigbadf250 08-16-2007, 04:37 PM I Have A Straight Axle Off A 77 Ford F 250, Dana 50 I Think. It Has The 4" Hubs. I Bought It For My 85 F 250, And Was Guaranteed It Would Work. When I Got It In The Leaf Spring Mounts Werent Close And No Front End Shops Are Willing To Make It Work. If Anyone Is Interested I Need To Get Rid Of It, And Possibly Buy One That Will Have Proper Alignment. Thanks. mustange70 08-16-2007, 05:00 PM dana 44, not a 50 50's weren't used till the ttb's and then again in the superduties Taragon 08-16-2007, 05:27 PM Just reweld some perches...ANY fab shop should be happy to make it work for you N_Rod 08-16-2007, 05:36 PM That front end was designed for a f-250 high boy. The front pinion angle is to low to use in a later model truck with out rotating the differential up. too steep of an angle for the front driveshaft without binding. Its just too much trouble to be worth it. However the lock out hubs, if are in good shape, are desirable on Ebay. they will fit either a Ford or a Chevy , (as long as its a Dana 44) | |