DrVic723
08-16-2007, 09:30 PM
Introducing our newest addition to our product line, 4130 CrMo Race style tube adapters!
http://ballisticfabrication.3dcartstores.com/assets/images/10chromoly1.jpg
From our website:
"4130 Chromoly Tube Adapter 1.25" 12 tpi Race Style
Machined from solid 4130 Chromoly, these tube adapters are designed with maximum strength in mind. A majority of the tube adapters fits inside the tubing, allowing a seamless uniform look to the end of your linkage, while increasing strength. To combat the effects of warping from welding, nearly one inch at the end of the adapter is unthreaded, while leaving enough threads to fit most common rod ends and a jam nut. The tube adapter is extra long, measuring 3.0" in overall length, adding greatly to the overall strength. These tube adapters are perfect for use with .120 wall Chromoly tubing commonly used in prerunners, dune buggies, and race cars."
http://ballisticfabrication.3dcartstores.com/assets/images/10chromoly2.jpg
1.0" 4130 Chromoly Race Style tube adapter next to a standard 1.0" 1018 steel tube adapter.
Sizes are currently limited to what is shown on the webpage, we don't have the capacity at this moment to make / stock every size that is available in 1018 CRS. These are weldable with common welding techniques, but use common ER70S-2 or higher quality ER80S for best results.
Thanks again to everyone for your wonderful support and remember to use your coupon code 'pirate' while checking out!
Order Here! (http://ballisticfabrication.3dcartstores.com/Tube-Adapters_c_7.html) $12.99 - $17.99
Made in house in the USA!
-Jeff
http://ballisticfabrication.3dcartstores.com/assets/images/10chromoly1.jpg
From our website:
"4130 Chromoly Tube Adapter 1.25" 12 tpi Race Style
Machined from solid 4130 Chromoly, these tube adapters are designed with maximum strength in mind. A majority of the tube adapters fits inside the tubing, allowing a seamless uniform look to the end of your linkage, while increasing strength. To combat the effects of warping from welding, nearly one inch at the end of the adapter is unthreaded, while leaving enough threads to fit most common rod ends and a jam nut. The tube adapter is extra long, measuring 3.0" in overall length, adding greatly to the overall strength. These tube adapters are perfect for use with .120 wall Chromoly tubing commonly used in prerunners, dune buggies, and race cars."
http://ballisticfabrication.3dcartstores.com/assets/images/10chromoly2.jpg
1.0" 4130 Chromoly Race Style tube adapter next to a standard 1.0" 1018 steel tube adapter.
Sizes are currently limited to what is shown on the webpage, we don't have the capacity at this moment to make / stock every size that is available in 1018 CRS. These are weldable with common welding techniques, but use common ER70S-2 or higher quality ER80S for best results.
Thanks again to everyone for your wonderful support and remember to use your coupon code 'pirate' while checking out!
Order Here! (http://ballisticfabrication.3dcartstores.com/Tube-Adapters_c_7.html) $12.99 - $17.99
Made in house in the USA!
-Jeff