We heat and cryo treat ring & pinions.

For offroad especially we heat treat the ring & pinion. This brings the rockwell hardness down a couple of points so it will withstand more of a shock load. Just like we do with the drag cars, then we cryo treat them. This successful process makes them much stronger than stock. We will treat any ring & pinion for $45.00 with free return shipping. Usally with a 2 day turnaround.

Could you treat a detroit locker? if so what would it cost?

Could you treat a detroit locker? if so what would it cost?

Yes call me.253-847-8254:smokin:

i have 2 dana 60 ff axle shafts i would be interested in freezing, pm me on what a price for this would be thanks.

i have 2 dana 60 ff axle shafts i would be interested in freezing, pm me on what a price for this would be thanks.

Just give me a call 253-847-8254.

Back to top.

Can you do drive plates such as the ones below?
http://www.9inchfloater.com/SpareParts/images/HubsDrvPlt.jpg

[QUOTE=8Superman;8703031]Can you do drive plates such as the ones below?
http://www.9inchfloater.com/SpareParts/images/HubsDrvPlt.jpg Yes call me 253-847-8254 thanks Bobby.

Thanks for treating my 5.86 gears, they are holding up great in my 1 ton axles and 47's! :smokin:

Thanks for treating my 5.86 gears, they are holding up great in my 1 ton axles and 47's! :smokin:

Yes this will help no more broken teeth.

$45.00 ea. plus free return shipping.

Hey Bobby Just wanted to let you and everyone know we did not break a gear set after you treated our tacoma gears, and you know how hard the big guy is on stuff.

A freind of mine also had me put a set of your treated gears in his 4runner on 38.5" tires. After one bad stuck on outer limits he though he had done the gears and brought the third and a new set of 5.29s to me. Your treated gears had a few small marks on 2 teeth and had some serious run out problems. When I bolted in the new gears the run out problems were the same as the old ones and I found the carrier was bent. With a new carrier he was on his way and I out of curiosity I set the treated gears up on a straight carrier and they ran true. In fact they are seving duty in my 4runner now. I think an untreated gear set would have lost teeth with that much deflection.

Wayne

$45.00 ea. plus free return shipping.

i just wanted to give you another heads up that my buddy shipped a toy 5.29 r&p to you to get heat & cryo'd for me since i'm in the desert at the moment. he e-mailed you a letter and he cc'd me on it as well. i'll also be wanting to buy a set of your chromo hub gears at the same time. if you could put them on the one bill when you mail back my r&p that would be great. just let me know, you now know what my screen name is on here as well as you should have me e-mail address.

thanks,
dan

i just wanted to give you another heads up that my buddy shipped a toy 5.29 r&p to you to get heat & cryo'd for me since i'm in the desert at the moment. he e-mailed you a letter and he cc'd me on it as well. i'll also be wanting to buy a set of your chromo hub gears at the same time. if you could put them on the one bill when you mail back my r&p that would be great. just let me know, you now know what my screen name is on here as well as you should have me e-mail address.

thanks,
dan

OK thanks Dan.

BUMP.:smokin:

See you at the KOH.:smokin:

free shipping.

have you had this load tested over a non treated?

have you had this load tested over a non treated?

No we have no way of testing them. But in comp. like Dave Cole Jeeprecovery team an others were breaking them all the time until we treated them with real good luck. Just like the ones we do for Drag cars.

2 day turn around free return shipping.

if the vendor im using to buy a lot of parts is willing to, can i have them ship you my gears rather than send them here and then send them back?

ill be getting a set of 30 spline toy longs, chromo hub gears, and wiper seals as well.

ryan

if the vendor im using to buy a lot of parts is willing to, can i have them ship you my gears rather than send them here and then send them back?


ryan

x2, I will like to know if I can have the seller of the gears to ship it to you then you ship it to me when you finish treating it?

thanks

sorry if this has been asked before, but after heat/cryo treatment, is standard break-in procedure the same, or is there a better way?

Might have to do this with my gears in the front after shafts and a locker in my D30..

if the vendor im using to buy a lot of parts is willing to, can i have them ship you my gears rather than send them here and then send them back?

ill be getting a set of 30 spline toy longs, chromo hub gears, and wiper seals as well.

ryan

Yes you can have them drop ship to us we do it a lot. Just make sure your name an phone number is on the box.

x2, I will like to know if I can have the seller of the gears to ship it to you then you ship it to me when you finish treating it?

thanks

Yes that can be done. We do it a lot.

sorry if this has been asked before, but after heat/cryo treatment, is standard break-in procedure the same, or is there a better way?

To be safe i would say its the same.

Might have to do this with my gears in the front after shafts and a locker in my D30..

Yes just send them anytime about 2 day turn around.

Bump, this works good.

Could you treat a detroit locker? if so what would it cost?

Yes call me. 253- 847-8254 Thanks Bobby. :)

Could you treat a detroit locker? if so what would it cost?

PM. sent.

what process is recommended for DD rigs?

what process is recommended for DD rigs?

Best thing to do is call me at 253-847-8254.

Yes it makes them stronger.

i have 2 dana 60 ff axle shafts i would be interested in freezing, pm me on what a price for this would be thanks.

PM. sent thanks.

Hey Bobby Just wanted to let you and everyone know we did not break a gear set after you treated our tacoma gears, and you know how hard the big guy is on stuff.

A freind of mine also had me put a set of your treated gears in his 4runner on 38.5" tires. After one bad stuck on outer limits he though he had done the gears and brought the third and a new set of 5.29s to me. Your treated gears had a few small marks on 2 teeth and had some serious run out problems. When I bolted in the new gears the run out problems were the same as the old ones and I found the carrier was bent. With a new carrier he was on his way and I out of curiosity I set the treated gears up on a straight carrier and they ran true. In fact they are seving duty in my 4runner now. I think an untreated gear set would have lost teeth with that much deflection.

Wayne

Thanks Wayne.

What would you charge to treat an entire ford 9" 3rd and stock axle shafts? Can bearing b treated since I want the whole thing done?

What would you charge to treat an entire ford 9" 3rd and stock axle shafts? Can bearing b treated since I want the whole thing done?

Call me 253-847-8254 thanks Bobby.:)

Could you treat a detroit locker? if so what would it cost?

PM sent thanks.