|
: pinion angle on a toy with rears up front?? jeepcj3a 08-22-2007, 04:40 PM rears up front of my first gen truck. Stock front hanger and using bud built bommerang shackles. The pinion angle is terrible, was wondering what people are doing to fix that on the cheap? I was told i couldnt use shims, does that sound right? Cut and turn? thanks rest of specs in my sig jeepcj3a 08-23-2007, 06:35 AM anyone? dwkremer 08-23-2007, 09:31 AM I do not know why you cannot use shims. jeepcj3a 08-24-2007, 03:37 PM bump dirtchicken 08-24-2007, 05:36 PM Cut and turn. Check the FAQ in the Toyota forum. dwkremer 08-24-2007, 05:49 PM Cut and turn. Check the FAQ in the Toyota forum. This is a little drastic for rears up front. Get some shims. jeepcj3a 08-24-2007, 06:19 PM yeah, ive read alot of cutting and turning the fronts, but just wondering what other with rears up front are doing, ive read some threads, but never seen the pinion angle issue addressed. As far as shims, i was told the perches were too small to put perches on. Never heard that before, but im also pretty new to toyota stuff. | |