|
mahaffey380 08-23-2007, 05:57 PM The other day my runner became hard to get in gear, almost haft to force it into gear, the slave cylinder is good I think cause I still have all my fluid, I have not had the clutch slip at all, so going to try and check it out this weekend, anyone have any idea's about the problem. It's only hard to get into gear from A stop or when I am crawling, on the road at normal speeds it seems to shift fine. bigarms23 08-23-2007, 07:03 PM check all clutch functions and also check your tranny it should be one or the other and check your hydralic lines to the clutch and along the firewall Urban Wheeler 08-25-2007, 08:30 AM Is it possible that the master and/or slave cylinder need rebuilding? Wermz 08-26-2007, 08:21 PM The last time I had problems getting into gear, it was the tranny going out. Are the symptoms the same with the truck off? | |