I get calls all day from people looking for ideas on how to do something. Our Selection, Thickness, & Price keeps 'em coming back for more. And not a silly selection made from every scrap we can find either! A usuable selection. Why would someone need 100+ variations of the same bracket?

All of our Link Tabs are 3/8" thick and allow you to build it and forget it. The different profiles & lengths can fit up on just about anything too! Mix and match for any angle easily, shave an edge and adjust a few degrees in a second......And priced fairly to begin with, no sale needed! And these are actually big enough to feel confident in using, note the hole, it is 9/16", compare this to the others you see advertised and tell me how confiident you would be using ours! Our Link tabs are also big enough to use even EVO joints, we don't make them so small that you can only use a 5/8" heim with them. We call those Shock tabs!

http://www.ruffstuffspecialties.com/gallery/albums/userpics/10001/normal_IMG_1008.jpg
http://www.ruffstuffspecialties.com/gallery/albums/userpics/10001/normal_IMG_1005.jpg

But when you order don't forget the discount of 10% when you use the PBB10 code!

Got a question of how to use these when making offset angles........

http://www.ruffstuffspecialties.com/gallery/albums/products/normal_curved-bracket-on-tube-2.jpg

or
http://www.ruffstuffspecialties.com/gallery/albums/products/normal_curved-bracket-on-tube.jpg

Pretty easy and inexpensive too......

BTT, and you have a PM.:D

You've got packages.....

The easiest and least expensive way to build an incredibally strong (3/8" thick) Link Suspension......use your imagination!

And if you aren't sure of which you need you can get a "set" for $23, a set is 2 of each length so you can mix and match for best angles......

These are THE way to save money on your build and you never have to wonder if they are strong enough!

Crossmembers, Trusses, Motor Mounts, Rockwells.......Always nice to have a flat edge tab or one made to mount on a corner that you can trust to take some abuse......

We have always believed options are what makes anything better, however, we don't give you the option of weaker. We only make these from 3/8" material and in only 5 different profiles and 3 different heights for each profile. If they are all the same length how do you make a 10 degree angle, you take out the grinder and give yourself some time, not with these! We continue to strive to offer the best choices for your suspension needs at the best price.......A set of 6 (2 of each height, 1 profile) is $23 before the PBB10 discount........

Offhand, do you know the OD of a 9" axle tube? Rig isn't near me but I need to order some tabs. Let me know ASAP, gotta order some shock tabs too! Thanks.

Offhand, do you know the OD of a 9" axle tube? Rig isn't near me but I need to order some tabs. Let me know ASAP, gotta order some shock tabs too! Thanks.


its a 3" tube if i remember right

Both 3" and 3 1/8" tubes, the 3" axle cutout tabs are fine.

AWESOME SHIPPING!!!! I bought my brackets and tabs on Wednesday and they arrived today! THANK YOU!!!! I will definately buy from you guys again!!!

:D :D :D :D :D

We try, usually we are 95%+ in stock and we have really stocked up for Christmas......

Or weak......

When you build think Ruffstuff Specialties!

Gift Certificates, that way they don't even have to understand what you want:D

no reason to play with the jigsaw puzzle, our brackets are already 1 piece!

Of the right kind!

Build it to last!

Strength, Quality, Value! Words to live by......Not a short-term offer to catch your attention, something you can rely on to be there.....As always, built right the first time!

The holidays killed us when it comes to new items but we are back on schedule and producing new stuff, keep checking!

Pics tommorrow.....

These link tabs are AWESOME!!!!!!!!!!!!!!!!!!!! :smokin:

I just used a set to make new lower control arm brackets and another set to make shock mounts on a TJ. I now have a Very Happy Customer who isn't likely to bend his control arm mounts anymore.

Thanks Dan for making me look good.

And what are you doing online at 5:45am on a Saturday? Go back to bed!

Sorry, forgot about the baby, I take it back......

I have to admit I've looked at these on your website a bunch of times and never thought the triangle based ones work like this. I need the space atop the truss for the ram and the frame style mount you have gave me limited vertical separation is this application. These little babies gave me the best of both worlds. They take up less space atop the truss(for my toy axle)they have more surface area to weld to and they sit higher for more separation as well. I'll get these welded up and post pics later.
Thanks again.

Likely it will only be days before someone copies them:smokin::D

You can mess around with little tabs and that is a very good way to become a better welder too because down the road you will get more welding practice when you get to do it again!

These are not expensive, but they aren't cheap if you get my meaning......:smokin:

You can mess around with little tabs and that is a very good way to become a better welder too because down the road you will get more welding practice when you get to do it again!

These are not expensive, but they aren't cheap if you get my meaning......:smokin:


Thanks for the support and think strong! Don't ever do it halfway......


Strength, Quality, Value.....

They were designed to fit even the largest of Joints available (EVO's) but they clear every joint by a minimum of 1/8" (all the can type joints). Don't buy on price if you can only use little toy heims with them. Someday you will want to upgrade to better, longer lasting joints and you don't want to have to build everything over again do you?

As usual.....

some of these better than the brackets. It is simply easier to set them up and if you need to modify them it only takes a second!

By the come on price some companies use, you know, $3.99 each!

The line goes:


$2.99 if you want them paper thin!

$3.99 if you want tin foil!

$4.99 for cardboard!

And on and on........


We only make them thick enough to last, as long as you have them! The right size and the right price!

to build it strong, rather than barely strong enough.....

If you have a Trophy Truck budget and can rebuild between races go ahead and use the lite stuff, it will likely last awhile, however if you are like the rest of us build it to last! And build it only the first time, if there is a second time you did something wrong the first time!

Watch for it! You GM and Ford full size guys pay particular attention.....:D

If our 3/8" tabs would work with a joint 3" wide? The answer.....They fit all joints made, plug and play!

Can sometimes be the best way also!

At least 500 of each of these in stock, we are not the kind of company that only builds things "AFTER" they have your order. And yes, we are not always successful at keeping things in stock but 100% in stock is always my goal!

BTW, I answer the phone myself 12 hours a day, 6 days a week, if you have a question just call, if I miss your call I will call you back!

Needed the time anyway for cad design time.....

Don't leave that question unanswered, thats why we have a phone! And we answer it from 8am until 8pm PST......

Use it......Thanks for all the orders, you guys have me working Sundays too!

We have every size in stock.....

We have every size in stock.....

5 sizes & 3 lengths each size! And every one in stock too!

Buy the size you need, not something you need to modify to make work.......

Is there anything wrong with Easy? Then why buy something and have to make do? Buy what you need.....Make life easy....

To get the combination needed for your project......

12 different Spring Perches
9 different Spring Hangers
6 different Ubolt plates
5 different Shock brackets
Shackle hangers available in any different width......

15 different Link Tabs......

It goes on and on

We can fit up your new axle or replace the old parts with some that will outlast the rest of the truck!

Fair priced is much better.......

Well, made to be able to drive through anyway:D

Be improving this selection in a big way over the next month, stay tuned!

Watch for the rewards in the mail for those of you registered on our site!

Watch for the rewards in the mail for those of you registered on our site!

Rewards!

I don't know what you are talking about:D:smokin:

Of them, do it while you can:smokin:

Take advantage while you can, 3/8" thick with a vengence!

http://www.ruffstuffspecialties.com/gallery/albums/products/normal_curved-bracket-on-tube-2.jpg

or
http://www.ruffstuffspecialties.com/gallery/albums/products/normal_curved-bracket-on-tube.jpg

Pretty easy huh? With the selection to use them on any surface!

For all the orders, I can't seem to get to Pirate except late at night. Thanks for keeping us so busy!

Finding something that already is made for the application you want and not having to grind it up to fit!

In the making of new products available. These are an example of the diversity we offer in all of our products and many companies are trying to mimic our variety, all of this is good for you!

We do offer 5 different link tab mounting profiles, 3 sizes each
We do offer 12 different Spring Perch combinations, from 2" Scout to 3" Ford & 2.5" to 3.5" width
We do offer 7 different Spring and Shackle combinations, in any width
We do offer 8 different Shock Mounting options that can be combined for any application.....

We do this not so it is easier for us but so it is easier for you! It costs' us quite a bit to keep that much variety in stock but it is a comitment we took on from the start......And we stand by our commitments. Always laser cut, always what you want!

The selection we offer comes first! All of these with no extra charge for setup!

You need something a little bit different than the run of the mill!

In the making of new products available. These are an example of the diversity we offer in all of our products and many companies are trying to mimic our variety, all of this is good for you!

We do offer 5 different link tab mounting profiles, 3 sizes each
We do offer 12 different Spring Perch combinations, from 2" Scout to 3" Ford & 2.5" to 3.5" width
We do offer 7 different Spring and Shackle combinations, in any width
We do offer 8 different Shock Mounting options that can be combined for any application.....

We do this not so it is easier for us but so it is easier for you! It costs' us quite a bit to keep that much variety in stock but it is a comitment we took on from the start......And we stand by our commitments. Always laser cut, always what you want!

So your install can be easy......

In progress in the General 4x4 section.....!

Just so you knew about 1 of our most popular link tabs before the story gets switched around.......We have been making and selling these for over a year! Available in 3 lengths so you can mix and match for the right angle......

http://www.ruffstuffspecialties.com/gallery/albums/userpics/10001/normal_IMG_0918.jpg

Only we make them with a 9/16" hole, the size you need them to be, who's going to use a 3/8" thick tab with a 1/2" bolt anyway?

http://www.ruffstuffspecialties.com/gallery/albums/userpics/10001/normal_IMG_0922.jpg

There seems to be much more, you be the judge! Unique from the start!

http://www.ruffstuffspecialties.com/gallery/albums/userpics/10001/normal_IMG_1008.jpg

Strength, Quality, Value

BTW, only 2 days left on our giveaway, 3 winners!

.....Originality? With a clear concience, I can:shaking:

I take great pride in our designs and also take great pains to avoid duplicating other companies designs.......

Release several new designs, things we have missed over the last few years that we are finally getting around to.....

7 new items over the last 2 weeks! Lots more coming....:D

Keep us in mind when you get to the 4 link point!

That the bracketry to do a 3 or 4 link needs to cost much! It just isn't that difficult to lay out with the right selection of tabs and brackets.....Call me and I can walk you through the basics or call me with your tough questions.....:smokin: I answer the phone myself 12 hours a day, 6 days a week.....

What can you say to someone that knows everything? Boy, I wish I did!

And we cover the bases with over 50 varieties......way too much means we are wasting money on things that will never sell, that just adds to the cost of what we do sell.....Think about that:(

Got 6 of these 3/8 ones today

http://www.ruffstuffspecialties.com/catalog/images/images_big/175shortab.jpg

These things are 3/8 thick and pure beef. I can't express how impressed I am with Ruff Stuff. They are most dependable company I have ever ordered from.

Thanks again Dan for the service,

We continue to add to our product line just about daily and now offer more than 350 items! Check back if you haven't lately:D