I'm bringing

<IMG SRC="smilies/biggrin.gif" border="0"> a bunch of Tri-tip
<IMG SRC="smilies/biggrin.gif" border="0"> chippin in for a bunch of various size square tube (i want rock sliders)
<IMG SRC="smilies/biggrin.gif" border="0"> chop saw?
<IMG SRC="smilies/biggrin.gif" border="0"> drill press?
<IMG SRC="smilies/biggrin.gif" border="0"> sawzall?
<IMG SRC="smilies/biggrin.gif" border="0"> my 1975 Scout II

What time?

--Josh

I may be able to show up and do dueling chopsaws.. kinda depends on wether my DD is running or not.. if I do I'll bring other goodies.

You guys having a wrench-a-thon? Be careful of you female dogs if you invite <IMG SRC="smilies/massey.gif" border="0">

Originally posted by Old Scout:
<STRONG>You guys having a wrench-a-thon? Be careful of you female dogs if you invite <IMG SRC="smilies/massey.gif" border="0"></STRONG>

We're too far for him dude.. why dont you come down though and kick back some <IMG SRC="smilies/beer.gif" border="0"> ?

I'll have my Lincoln buzzbox.
Lot's of hand tools.
Sawzall
4 inch grinder but I need to finfd the tool thingy to change the disks.
I also have an old ugly one lunger 60 gallon air compressor
various pieces of steel

I need to run my new fuel lines and pull my motor again so I can finish gusseting the suspension crap on my frame.

Which Sunday? This one or the 9th? I'll bring <IMG SRC="smilies/beer.gif" border="0"> <IMG SRC="smilies/beer.gif" border="0"> and a box of 6013!

The 9th

I'll plug in the little fridge in the garage for the the weekend to keep the beer cold.

Oh geez.. looks like Im coming on up. What are we building, so I have a clue what toys to bring?

I think I will be making a front driveshaft.
and and a crossmember/skidplate

I'll try to get all my gussets into place on my frame and maybe I'll bolt my gastank in <IMG SRC="smilies/biggrin.gif" border="0">

I think there is going to be an axle swap and another driveshaft.

and I think some rocker gaurds.

Let's start the order for steel now. I'll need to pick up by Friday as I'll be out of town next week, unless Josh C will pickup the material. So far:
2.5 X 2.5 .250 seamless receiver tube 8' (Me, Toad)
2 x 2 .250 tube 5' (Me)
1 x 2 .120 tube 20' (Josh, Me)

Anyone need electrical let me know, I bring tools, grinder, and any other shit I think I might need.

Joe <IMG SRC="smilies/smokin.gif" border="0">

Originally posted by jdjanda:
<STRONG>Let's start the order for steel now. I'll need to pick up by Friday as I'll be out of town next week, unless Josh C will pickup the material. So far:
2.5 X 2.5 .250 seamless receiver tube 8' (Me, Toad)
2 x 2 .250 tube 5' (Me)
1 x 2 .120 tube 20' (Josh, Me)

Anyone need electrical let me know, I bring tools, grinder, and any other shit I think I might need.

Joe <IMG SRC="smilies/smokin.gif" border="0"></STRONG>

I could use some electrical assistance. At least get my headlights working so I can drive home. <IMG SRC="smilies/laughing.gif" border="0">

Originally posted by JoshC:
<STRONG>I could use some electrical assistance. At least get my headlights working so I can drive home. <IMG SRC="smilies/laughing.gif" border="0"></STRONG>

easy enuff

i might bring over my truck and start moving the bumpers up as well, sounds like a goo time!

Originally posted by Mark.:
<STRONG>i might bring over my truck and start moving the bumpers up as well, sounds like a goo time!</STRONG>

Great, then you can pick me up on the way if my trucks still non-op <IMG SRC="smilies/wink.gif" border="0">

Sounds like there might be alot of work to be done in one day.

I'm thinking that some of us might have to get started on saturday.

Originally posted by JoshC:
<STRONG>I could use some electrical assistance. At least get my headlights working so I can drive home. <IMG SRC="smilies/laughing.gif" border="0"></STRONG>

I told you how to fix it, just pound the dash until the lights come on. Shit it ain't rocket science <IMG SRC="smilies/eek.gif" border="0"> Quite your bitch'n <IMG SRC="smilies/thefinger.gif" border="0">

A bunch of guys, power tools, and beer, what's the response time of local EMS.

Joe <IMG SRC="smilies/smokin.gif" border="0">

Originally posted by jdjanda:
<STRONG>

A bunch of guys, power tools, and beer, what's the response time of local EMS.

Joe <IMG SRC="smilies/smokin.gif" border="0"></STRONG>


Only person we need to worry about is toad.. I dont think I've ever seen him work on something and not bleed <IMG SRC="smilies/wink.gif" border="0">

Originally posted by mike:
<STRONG>
Only person we need to worry about is toad.. I dont think I've ever seen him work on something and not bleed <IMG SRC="smilies/wink.gif" border="0"></STRONG>

LOL

yeah i will pick you up, but hopefully we can get the truck going this weekend,

i will probally just bring my bumper pre cut to just tack together out there, my front bumper will take a few hours and i don;t feel like doing it that weekend

It's still on for this sunday.
The wrenching starts when the first person shows up. Hint Hint I like to get out of bed around 8:30 on sunday so right around that time is fine with me <IMG SRC="smilies/biggrin.gif" border="0">

I'll have beer and some food feel free to bring whatever you want.

Oh my address is 1898 Vine lane in Antioch.

Just down the street and around the corner from the bridgehead cafe.

I'll bring extension cords, <IMG SRC="smilies/beer.gif" border="0"> ,sawsall, <IMG SRC="smilies/beer.gif" border="0"> ,and a couple of ice boxes for the <IMG SRC="smilies/beer.gif" border="0"> <IMG SRC="smilies/beer.gif" border="0"> <IMG SRC="smilies/beer.gif" border="0">

i can bring $$ for Pizza,

i will show up @ 5am <IMG SRC="smilies/biggrin.gif" border="0">, hope sara does not mind

anyway, if i ever get my damn tie rodss from carparts.com that is

Sounds like a cool little party in the works! Can a Pirate attend.......... I wont be wheeling that weekend but sounds like a good time and I'll get to place a few faces with names Come Awn!

GET IT

Originally posted by welndmn:
<STRONG>i can bring $$ for Pizza,

i will show up @ 5am <IMG SRC="smilies/biggrin.gif" border="0">, hope sara does not mind

anyway, if i ever get my damn tie rodss from carparts.com that is</STRONG>

I hope you're going, dammit, you're my ride.

Originally posted by Kevin:
<STRONG>Sounds like a cool little party in the works! Can a Pirate attend.......... I wont be wheeling that weekend but sounds like a good time and I'll get to place a few faces with names Come Awn!

GET IT</STRONG>

Come awn over but you'll have to stay away from my chickens <IMG SRC="smilies/biggrin.gif" border="0">

Originally posted by Rocktoad:
<STRONG>Come awn over but you'll have to stay away from my chickens <IMG SRC="smilies/biggrin.gif" border="0"></STRONG>


LOL and I'm a clamper to boot........damn I'm all fawked up! Great I'll be there!

<IMG SRC="smilies/biggrin.gif" border="0">

If its needed I'll bring my Husky AirSaw if someone needs some fender triming!!! If you have a spare 110V connection I can bring my 36 Gal. Craftsmen Compressor???????? Let me know Guys. <IMG SRC="smilies/biggrin.gif" border="0">

Originally posted by Kevin:
<STRONG>If its needed I'll bring my Husky AirSaw if someone needs some fender triming!!! If you have a spare 110V connection I can bring my 36 Gal. Craftsmen Compressor???????? Let me know Guys. <IMG SRC="smilies/biggrin.gif" border="0"></STRONG>

Cool, I was plannin on bringing my small compressor.. with the # of things goin on the more tools the better!

Compressor might be nice. Mine takes hours to refill the 60 gallon tank.

Originally posted by Rocktoad:
<STRONG>Compressor might be nice. Mine takes hours to refill the 60 gallon tank.</STRONG>

Ya just need to pedal faster. <IMG SRC="smilies/biggrin.gif" border="0">

I guess I should reorganize and clean my garage up before this weekend <IMG SRC="smilies/eek.gif" border="0">

Originally posted by mike:
<STRONG>Ya just need to pedal faster. <IMG SRC="smilies/biggrin.gif" border="0"></STRONG>

I think my compressor was removed from active duty in about 1957 from a gas station.

Having trouble finding a rebuild kit for the pump <IMG SRC="smilies/biggrin.gif" border="0">

I'll bring sand to clean up all the <IMG SRC="smilies/beer.gif" border="0">, uhm I mean oil spills. Toad I have the 2.5x2.5 .250 seamless.

Joe <IMG SRC="smilies/smokin.gif" border="0">

Originally posted by Kevin:
<STRONG>If its needed I'll bring my Husky AirSaw if someone needs some fender triming!!! If you have a spare 110V connection I can bring my 36 Gal. Craftsmen Compressor???????? Let me know Guys. <IMG SRC="smilies/biggrin.gif" border="0"></STRONG>

What's the buz about this wrench-a-thon? It's me,!!! removing my inner rear fenders and four inches of bed. <IMG SRC="smilies/bounce2.gif" border="0">

I was gonna bring some tri-tip, sawzall, chop-saw, ???

--Josh

Originally posted by JoshC:
<STRONG>What's the buz about this wrench-a-thon? It's me,!!! removing my inner rear fenders and four inches of bed. <IMG SRC="smilies/bounce2.gif" border="0">

I was gonna bring some tri-tip, sawzall, chop-saw, ???

--Josh</STRONG>

BRING IT!!!

Hey we need a :SAWZALL: icon <IMG SRC="smilies/biggrin.gif" border="0">

I just baught a hole saw.

Aren't we doing an axle swap too.

I have the material to make new spring perches and the welder to stick them on.

ok we seem to have evrything all we need is mikes new Chop saw <IMG SRC="smilies/biggrin.gif" border="0">, i will bring some extion cords and junk, along with my sazall and grinder

How about a bench grinder?
any one have one on a pedestal that can be moved?

[ 09-04-2001: Message edited by: Rocktoad ]

Originally posted by Rocktoad:
<STRONG>How about a bench grinder?
any one have one on a pedestal that can be moved?

[ 09-04-2001: Message edited by: Rocktoad ]</STRONG>


I can bring mine if you wanna drill some holes in your bench <IMG SRC="smilies/wink.gif" border="0"> I'll bring the chop saw, sawzall, die grinder, the weasel...

We might want to have the guiness book of world records on hand to record us as having the largest number of sawzalls in one driveway hacking away sheetmetal ;d

I have a bench grinder I can bring as well as a 4" angle grinder. I'd bring my compressor but it ways a ton. Just ask Welndmn, it's his old one.

I'll bring my PowerTank. It might come in handy <IMG SRC="smilies/biggrin.gif" border="0">

Let's Get It! awn <IMG SRC="smilies/skull.gif" border="0">

yeah, leave that heavy ass comprssor at home mark,


ohh yeah, i will also bring some band aids <IMG SRC="smilies/biggrin.gif" border="0">

is thier going to be a mig there?

I might be able to have a MIG available.
It belongs to Nailhead it has been at my house for a while. he just took the bottle to get it refilled.

Mike can you bring the tube notcher just in case we need it <IMG SRC="smilies/biggrin.gif" border="0">

Originally posted by Rocktoad:
<STRONG>I might be able to have a MIG available.
It belongs to Nailhead it has been at my house for a while. he just took the bottle to get it refilled.

Mike can you bring the tube notcher just in case we need it <IMG SRC="smilies/biggrin.gif" border="0"></STRONG>


yeah.. I can

Bender!?...........who needs a tube bender? I can grab it if needed.

Wear hard shoes 'cause Toads chicken is ferocious. <IMG SRC="smilies/biggrin.gif" border="0">

Sh!t...........I'm a wheeler!
pad..pad..pad

Originally posted by nailhead:
<STRONG>Bender!?...........who needs a tube bender? I can grab it if needed.

Wear hard shoes 'cause Toads chicken is ferocious. <IMG SRC="smilies/biggrin.gif" border="0"></STRONG>


The BAD chicken... you feedin that thing extra portions yet Todd? Gotta fatten that damned bird up ya know!

Bender would be real nice.
I would be able to make my cross member <IMG SRC="smilies/biggrin.gif" border="0">

I can help you pick it up on Saturday.

Assuming of course the 1.5" die has been located <IMG SRC="smilies/wink.gif" border="0">

The bender will be there in all its glory with the 1.5 and 2.0 dies. A 1.75 can be there if its needed.
BTW all dies are 180* <IMG SRC="smilies/biggrin.gif" border="0">

-Toad,how about if we start on sat?-

Ryan come over Saturday morning and we'll work on our stuff.

That way Sunday we can just focus on helping everyone else.

Sara is going to fire up the Waffle iron on Sunday morning.

I imagine we'll have eggs bacon and sausage and beer as well <IMG SRC="smilies/biggrin.gif" border="0">

Ryan why don't you come over tonight and we'll drink a twelve pack and discuss. what we need to do to our rigs <IMG SRC="smilies/biggrin.gif" border="0">

I'm thinking of starting on one end of my square driveshaft tonight.

What happenend I just looked all over the place and couldn't find this post and now here it is again <IMG SRC="smilies/confused.gif" border="0">

Originally posted by Rocktoad:
<STRONG>
I'm thinking of starting on one end of my square driveshaft tonight.</STRONG>

Toad, what size u-joints are you using for the square drive shaft?

Joe <IMG SRC="smilies/smokin.gif" border="0">

I think 1350 or something like that.

Originally posted by Rocktoad:
<STRONG>I think 1350 or something like that.</STRONG>

You're using 1310's <IMG SRC="smilies/wink.gif" border="0">

HAHAHA Mike thanks for reminding me.

The only numbers I remember are how many beers come in a six, twelve, and eighteen packs of beer.

I also have my phone number memorized.
Oh and I know what size tires are on both of my jeeps. <IMG SRC="smilies/biggrin.gif" border="0">

Originally posted by Rocktoad:
<STRONG>HAHAHA Mike thanks for reminding me.

The only numbers I remember are how many beers come in a six, twelve, and eighteen packs of beer.
</STRONG>

pop quiz: How many beers are in a suitcase?

<IMG SRC="smilies/biggrin.gif" border="0"> <IMG SRC="smilies/biggrin.gif" border="0"> --Josh

Originally posted by xtremely cheap bastard:
<STRONG>pop quiz: How many beers are in a suitcase?

<IMG SRC="smilies/biggrin.gif" border="0"> <IMG SRC="smilies/biggrin.gif" border="0"> --Josh</STRONG>


Depends on the suitcase <IMG SRC="smilies/wink.gif" border="0"> I got an 80 beer one somewhere <IMG SRC="smilies/biggrin.gif" border="0">

HMMMM well some would say none because it is a suit case but if it were me I would have to say all of them.

Because I wouldn't put a suit in the suitcase. I would put all the beer I had into it. That is if I didn't have a fridge or an ice chest <IMG SRC="smilies/biggrin.gif" border="0">

I have been party to these fuctions before......I'll be surprised if we get anything done with that much beer LOL.......I'm wondering if I should bring the 4Runner and do some much needed work on it???? Anyone have a Dent puller??? Seriously I wanna pull the dents from my half doors.

Kevin- I have some body dollies and hammers I could bring. I've hammered my share of panels straight in the past.

Originally posted by Kevin:
<STRONG>I have been party to these fuctions before......I'll be surprised if we get anything done with that much beer LOL.......I'm wondering if I should bring the 4Runner and do some much needed work on it???? Anyone have a Dent puller??? Seriously I wanna pull the dents from my half doors.</STRONG>


Go for it, Im not bringing my junk cause the dash is still apart <IMG SRC="smilies/wink.gif" border="0">

can't we just weld an eye bolt to the door and get a rope attache to it and have all our drunk arses pull the dent out that way <IMG SRC="smilies/biggrin.gif" border="0">

Nailhead might have a dent puller.

hmm maybe i will come over sat. then i can get my stuff done then just drink and throw chicken poo at the other guys

Hey, thinking of.. in the next couple weeks can I borrow your hoist and a hand or two and yank the dead block out of the ugly truck? No matter what happens, it has to come out.

Well fawk it then if its all good I'm bringing my Rig on the trailer! As long as you have room Rocktoad.......I think next time we'll have to make this a weekend gig! <IMG SRC="smilies/biggrin.gif" border="0">

One last request.........Directions and a Home number for your pad Rocktoad.

UGET IT

Here it is

1898 Vine lane
Antioch, CA. 94509

(925)778-8205

Heres what my house looks like. big side yard
Long driveway should be plenty of room on the rightside of the driveway for a trailer and vehicles to park.

http://ajax.extremejeep.com/rocktoad/ourhouse.jpg

Next time we'll have to find one of them big ole army tents and camp out in it.
start on friday night and party till sunday.
Have our selves one oif them Octoberfest pow wow events.

Directions from Vasco Rd.


1. Start out going North on WALNUT BLVD (aka Vasco) towards ANDERSON AVE by turning right.

2. Turn SLIGHT RIGHT onto OAK ST.

3. Turn LEFT onto BRENTWOOD BLVD/CA-4.

4. BRENTWOOD BLVD/CA-4 becomes MAIN ST/CA-4.

5. Stay straight to go onto E 18TH ST/CA-4.

6. Stay straight to go onto E 18TH ST.

7. Turn RIGHT onto VIERA AVE.

8. Turn RIGHT onto VINE LN.

think i got em right

Originally posted by welndmn:
<STRONG>Directions from Vasco Rd.


1. Start out going North on WALNUT BLVD (aka Vasco) towards ANDERSON AVE by turning right.

2. Turn SLIGHT RIGHT onto OAK ST.

3. Turn LEFT onto BRENTWOOD BLVD/CA-4.

4. BRENTWOOD BLVD/CA-4 becomes MAIN ST/CA-4.

5. Stay straight to go onto E 18TH ST/CA-4.

6. Stay straight to go onto E 18TH ST.

7. Turn RIGHT onto VIERA AVE.

8. Turn RIGHT onto VINE LN.

think i got em right</STRONG>

Pretty much, and you're still picking me up right, and I know how to get there anyway <IMG SRC="smilies/biggrin.gif" border="0">

I think Mark will be at my place on Sat and Sunday.

Originally posted by Rocktoad:
<STRONG>I think Mark will be at my place on Sat and Sunday.</STRONG>

Well then one of the two of you'd better come pick me up on sunday. <IMG SRC="smilies/wink.gif" border="0">

Originally posted by mike:
<STRONG>Well then one of the two of you'd better come pick me up on sunday. <IMG SRC="smilies/wink.gif" border="0"></STRONG>

yup, i will ome get ya on Sunday, you might be able to go on Saturday, but i think Stacie wants to come with me

Originally posted by welndmn:
<STRONG>yup, i will ome get ya on Sunday, you might be able to go on Saturday, but i think Stacie wants to come with me</STRONG>

I cant go on Saturday, family calls.

Originally posted by Kevin:
<STRONG>I have been party to these fuctions before......I'll be surprised if we get anything done with that much beer LOL.......</STRONG>


uhm, I don't remember anybody saying they are bringing beer. <IMG SRC="smilies/rolleyes.gif" border="0">

Ahahahahahaha
<IMG SRC="smilies/biggrin.gif" border="0"> <IMG SRC="smilies/biggrin.gif" border="0"> <IMG SRC="smilies/biggrin.gif" border="0"> <IMG SRC="smilies/biggrin.gif" border="0"> <IMG SRC="smilies/biggrin.gif" border="0">

Originally posted by xtremely cheap bastard:
<STRONG>
Ahahahahahaha
</STRONG>

Ahahahahahaha
<IMG SRC="smilies/beer.gif" border="0"> <IMG SRC="smilies/beer.gif" border="0"> <IMG SRC="smilies/beer.gif" border="0"> <IMG SRC="smilies/beer.gif" border="0"> <IMG SRC="smilies/beer.gif" border="0">

I think this will be a "Tecate with lime weekend".

Originally posted by nailhead:
<STRONG>I think this will be a "Tecate with lime weekend".</STRONG>

dose cervesas porfavor... and a sawzall for my friend <IMG SRC="smilies/biggrin.gif" border="0">

i may drop by sunday afternoon. i have yet to see anyone step up to a supervisory role. i think there will need to be some discipline instilled if any work is goin to get done.
maybe i could load a half dozen people up and most of the tools and bring everyone up to willits to finish my shit. i need a x-member buit.
may see ya there.
shon

someone has to stay sober enuff to give me directions to san ramon .
shon

Originally posted by black99-Shon:
<STRONG>someone has to stay sober enuff to give me directions to san ramon .
shon</STRONG>

I don't think it's going to be that crazy. We are just tryin to scare RockToad. <IMG SRC="smilies/eyemouth.gif" border="0">

Originally posted by JoshC:
<STRONG>I don't think it's going to be that crazy. We are just tryin to scare RockToad. <IMG SRC="smilies/eyemouth.gif" border="0"></STRONG>

You wont scare him that way.. trust me. only time Ive seen beer scare him was when we were too drunk to leave work <IMG SRC="smilies/wink.gif" border="0">

This looks event looks like it needs to be
crashed by the south-bay crowd too...

I wish I wasn't working or I'd show up
and at least watch you guys work for awhile.

But then, since I saw an address, maybe
maybe...

can you say loooooooooong lunch break?

Sherpa