Hey guys, Im busy collecting parts to pull my ailing puegot out of the jeep, and replace it with a TF-999 automatic. Does anyone know where to find a COMPLETE list of all parts needed? Here's what I have so far:
Shifter
Tranny Cooler
Shift cable
tranny mount
dipstick and tube
throttle cable and brackets
Can anyone think of anything else? Is there something in there I dont need?
Scott <><

I would call advanced adapters and talk to Randy, I think that was his name?

When I did my t-18 and 205 conversion he was most helpfull. He would answer every question that I had and told me EVEYTHING I needed to know and what I needed to get to do the job. He even went so far as to tell me what exact year parts out of exact vehicles that I would need, mind you I used clutch parts from 6 different years and 3 different vehicles.

<IMG SRC="smilies/usa.gif" border="0">

Thanks,
I may have to give them a call if I can't find it out here..
Scott <IMG SRC="smilies/grinpimp.gif" border="0"><><

what are you using as a bell housing?

<IMG SRC="smilies/usa.gif" border="0">

from what I understand the bellhousing for the puegot will work with the TF999...
Scott <IMG SRC="smilies/grinpimp.gif" border="0"><><

BTT.. anyone?? Bueller?? Bueller??
Scott <IMG SRC="smilies/grinpimp.gif" border="0"><><

Originally posted by 1badjeep:
<STRONG>from what I understand the bellhousing for the puegot will work with the TF999...
Scott <IMG SRC="smilies/grinpimp.gif" border="0"><><</STRONG>
The bellhousing is part of the case on the 999 The only thing you need to worry about is if you have a 4.0 you should get a 999 with the CPS hole in the case. Or you can get the remote mount kit for $400 Other than that it looks like you are about there. Isnt the Puegot a 21 spline output? The 999 is 23!

As far as the CPS. You can get them direct from Hesco for $279. AA is coming out with one pretty soon that I think will be even less expensive. I don't know when they will be shipping though.