Who's got what, who needs what?

I have the following:

-Fj40 hardtop, doors with NEW regulators...................gone
-Fj40 hardtop sides............................................. ...$free
-(2) SBC HEI dist. complete.....................................$75/ea/offer
-Quadrajet carb and adapter for Edelbrock manifold......$75/offer
-Sanderson SBC headers new, but one is scratched.....$200/offer
-Stock Fj40 gas tank.............................................. $offer
-Stock Fj40 heater and fan (front)............................$offer
-F/R Fj40 leaf springs with extra leaves......................$offer
-Roll cage. Stockish back half with A pillar with 3 spreaders. Also has a hoop to mount bucket seats w/out a stock tank, or cut that out to keep your stock tank. I had a full family cage built......gone
-One pair of D60 hi-steer arms, shim style...................$150/offer
-Two, snap soft tops. One is in great condition, the other needs a new zipper on the rear and has a small tear it looks like...$offer
-One set of soft half doors. Good shape, one needs a new outside handle.......................$offer
-One set of two-piece soft doors..............................$300/offer

I need:

-side mirrors
-windshield latches (the ones on the hood)

I have: rear wheel well seats 78,heaters front, rear, rear doors 72,emu front 60 springs, emu rear 55 springs, front 78 gas tank, gas tank cover, will have more also a couple FJ40's

Looking for: E-brake cable and housing for a 77, center tranny cover 78. speedometer assembly 67, side mirrors 77, windshield frame 78

I need a windsheld for a 70-74;


I have a hole list of parts,

I will have available soon,

All FJ40 73

front and rear axles complete
drivelines
t-case
3 speed tranny shifter in the floor
2F 6 cyl engine running and everything attached to it.
leaf springs
Well to make it easy..... pretty much everything but the tub and frame.

i have the usual gang of crap and i will be driving the tow rig and trailer so i can transport parts for y'all as well..........


some of the stuff i have for sale:

pair of fj60 axles

pair of fj62 axles

4spd and 34mm split case

3FE complete

.....

Hey George

Will you sell just a rear axle and what do you want for it

Thanks
Cacy

i'll sell the fj60 rear seperate. a little rusty and crusty but it's all there and in working order. $200 delivered to pismo.

Does it have 4.10 or 3.70

pretty sure that all the fj60s had 373s in them.

Does it have 4.10 or 3.70


Just buy it and put a R&P along with a Detoit in it. You can have Brent install them.

I am think of putting 4.88 front and rear. Need to check the Funds.

I am think of putting 4.88 front and rear.

perfect! :smokin:

What about the FJ62 rear. Didnt a lot of those have 4.11 gears in them. would you sell just the rear FJ62 if it has 4.11.

yup, fj62s have 411 gears in them. but i don't want to seperate that set, hence my previous reply.:p

FJ60 = 3.73 f&r
FJ62 = 4.11 f&r

FJ60 = 3.73 f&r
FJ63 = 4.11 f&r

huh; fj63?! :flipoff2:

what about the HJ61? :p

huh; fj63?! :flipoff2:

what about the HJ61? :p

Fixed post :D:flipoff2:

Added some stuff, make offers I don't need any of it and don't want to store it anymore.

Wilson
What color are the soft tops? Do you have frames for them?

Wilson i thnk i have a set of latches for the windshield i will check and throw them in the cruiser and bring them up, what year are those sides for we might be able to use them if you still have them Thanks UPDATE found them today and they are in the cruiser see ya at SnT

Sides fit my 1970, not sure what year they were originally. Soft tops are black and I have at least one set of bows for the soft top. I would probably let the two tops go if someone wanted one and the two piece doors.

Thanks on the latches!

I have: rear wheel well seats 78,heaters front, rear, rear doors 72,emu front 60 springs, emu rear 55 springs, front 78 gas tank, gas tank cover, will have more also a couple FJ40's

Looking for: E-brake cable and housing for a 77, center tranny cover 78. speedometer assembly 67, side mirrors 77, windshield frame 78

do you mean the e-brake handle ? that i think i have also i have a bare windshield frame off an 83 it has some dents but your welcome to it

I have a request.

Anyone have front of rear spider gears? When I put in my locker I welded them up and made a nice paperweight/pen holder. Buddy really likes it and I told hime I'd weld one us (30 second job) if I could pick some up. so if you have any laying around I'd love to get them from you.

I'll share my beer with you....that's the best offer i've got.

I have a request.

Anyone have front of rear spider gears? When I put in my locker I welded them up and made a nice paperweight/pen holder. Buddy really likes it and I told hime I'd weld one us (30 second job) if I could pick some up. so if you have any laying around I'd love to get them from you.

I'll share my beer with you....that's the best offer i've got.

Hey Doc !!!

I may still have mine out in the garage some where, I'll check after work monday.

I have a request.

Anyone have front of rear spider gears? When I put in my locker I welded them up and made a nice paperweight/pen holder. Buddy really likes it and I told hime I'd weld one us (30 second job) if I could pick some up. so if you have any laying around I'd love to get them from you.

I'll share my beer with you....that's the best offer i've got.

If that falls through, I have front and rear spiders in a bag. Let me know.

Hey Doc !!!

I may still have mine out in the garage some where, I'll check after work monday.

I found them... I'll add them to the packing list.

I found them... I'll add them to the packing list.

Awesome! Thanks Rick.

If anyone wants tube fenders I have 2 sets of just the tubes from metal tech.
They are the OEM style ( no longer made ) metaltech ones.

If anyone wants tube fenders I have 2 sets of just the tubes from metal tech.
They are the OEM style ( no longer made ) metaltech ones.

How much? Will thier current finishing kit work with them?

Also-

Silly request but I need the front grill toyota emblem, bounced mine off on the rubicon and I find having it on helps decrease the "cool jeep" comments.

Lastly: I need carb help from someone out there, still having heating cooling problems and I think it has to do with the jets/vacuum or intake manifold. I'll bring all the tools, just need someone who knows more than me...doesn't take much:D


DANG, I'M A FAWKER:flipoff2: ALL THESE REQUEST AND I HAVE NOTHING TO OFFER BUT BEER AND A COMPLIMENTARY PROSTATE EXAM.:flipoff2:

finishing kit will work except for the front bib mounts IIRC.

125 for the tubes , inc- four main bars ( 2 per side )
main vertical support
2 front nose pieces
2 mid point spreaders
2 rear spreaders
no skins or mount tabs.

The bends match the OEM fender.

Hey Pees,

I am down for the fenders if docroh passes. The 45 needs to stay uncut. I'll be in the obnoxious orange FJC. :p

Well, that solves it. 2 sets are comin to SnT. Megolfer and Docroh are first up, if they fan it then it is first come after Eshelbyk.

If anyone wants to order anything from Metal Tech give me a call and I'll bring it down to Surf 'N Turf with me. Or if you have a friend that is going to Surf 'N Turf and want them to bring something back to your hometown that works as well. Free shipping since I will be personally delivering it.

1-800-839-0684 ext. 40

My stuff- all ballpark figures

5x 15x7 MRW offroad steel rims, squareish D style cutouts, black - used about 2000 miles... $250
5x 15x8 MRW offroad steel rims, squareish D style cutouts, silver - new never mounted...$250
5x 15x7 or 8 Chevy rallye rims with rings and caps ("4x4") (NOTE: these won't fit a cruiser- doh!)... $100
EDIT: 4x stock cruiser rims (probably rivets) widened to 15x10, $100

5x 37x12.5x15 MTRs, about 90% tread, spare has 100%, on MRW beadlocks (circle cutouts).. will separate but wheels must go before tires... $1400

so much misc crap.. angle iron with tube 40 sliders ($50), conferr aux tank for a 40 ($400) with the cutout pocket/door/filler/etc, m12000 winch ($900), i'll look around the shop tonight

send email with cash offers if interested in anything - eshelbyk at gmail


LT is my transport :D

ok more junk-

conversion kit for 4.3L into a mini- Downey motor mounts, Howell electronics, everything is new...$200
complete FJ62 power steering setup- pump/pulley, hoses, box, steering column, steering wheel...$300
specter bikini extreme, tan, great shape...$50
all pro hysteer, new...$200
2 wheel spacers.. 1/2" i think, but now I don't remember where they are...$40
bumperettes! $20
edit: diamond plate corners, new $50

email eshelbyk at the gmails if interested in anything

I've got a guy in AK that needs a delivery from S&T to seattle. rear bumper, pretty big but he'll pay some of your gas. any of you northwesters let me know and I'll make it worth your while...

thanks in advance.

-luke@4x4labs

I've got a BUNCH of stuff to sell, and no time any more to answer e-mails or the phone to get it sold.:( Leave a message at the shop along with your phone number, and I'll bring what I can. Already bringing a ConFerr rear seat for Mark [yellow 40 with the Ford grill emblem!]

Thanks.:)

Hey if anyone wants some of my cool stuff....


Ive got 2 dunlop Snow Cruisers mounted on FJ60 wheels brand new shape never driven on.

A few Taurus fans 3.8 2 speed ones.

I think thats all ive got that is ready to sell.

Thanks guys,

-Joe