DIY4X
10-11-2007, 09:19 PM
All one piece 4 sides folded and the corners buzzed shut!
Spring plates are slotted in the center to accomodate your different offsets from perches and other devices.
http://diy4x.com/cart/image/cache/UD%20spring%20plates-400x400.jpg
If I don't have yours on the site shoot me a pm with tube dimensions and spring width and we'll make them for you. I'll give ya a brake for bringing the dimensions!
All 1/4" thick steel, chamferred holes and sanded clean(We sand it while its flat and it only takes a second this way you don't need to when its bent to shape.) Ready for paint.
$45 pr.
Spring perches have offset holes at 1" and 1.5". This give you 4 different offset options.
We can also add some heigth to these however this does effect the ability to bend them from one piece of steel.
Sanded and chamferred of course. We also give these a once over after they are welded to make sure there isn't anything harsh riding against the spring.
http://diy4x.com/cart/image/cache/14%20BFF%20Spring%20perches-400x400.jpg
$40 pair. 14BFF on the website. Call for other axles. Gona start adding some more axles to the line up so if ya have a specific one you need let me know, it'll be first.
Next up,
Dana 70
14BSF
Dana 70HD
Dana 60
Ford 9"
Dana 44
corp 10
corp 12
What else ya need?
Samurai?
Toyota?
Spring plates are slotted in the center to accomodate your different offsets from perches and other devices.
http://diy4x.com/cart/image/cache/UD%20spring%20plates-400x400.jpg
If I don't have yours on the site shoot me a pm with tube dimensions and spring width and we'll make them for you. I'll give ya a brake for bringing the dimensions!
All 1/4" thick steel, chamferred holes and sanded clean(We sand it while its flat and it only takes a second this way you don't need to when its bent to shape.) Ready for paint.
$45 pr.
Spring perches have offset holes at 1" and 1.5". This give you 4 different offset options.
We can also add some heigth to these however this does effect the ability to bend them from one piece of steel.
Sanded and chamferred of course. We also give these a once over after they are welded to make sure there isn't anything harsh riding against the spring.
http://diy4x.com/cart/image/cache/14%20BFF%20Spring%20perches-400x400.jpg
$40 pair. 14BFF on the website. Call for other axles. Gona start adding some more axles to the line up so if ya have a specific one you need let me know, it'll be first.
Next up,
Dana 70
14BSF
Dana 70HD
Dana 60
Ford 9"
Dana 44
corp 10
corp 12
What else ya need?
Samurai?
Toyota?