troutbum
06-21-2002, 02:10 PM
There was a post while back about fuel cells/tanks when bobbing a scout. Everyone had ideas, but did anyone ever do anything or are y'all slapping a big ass cell in the bed? The best idea (i thought) was two fuel cells mounted under the seats.
RCI makes the 2150 which is 20x18x10 and 15 gallons I don't have the stock seats. I have corbeau seats and I have 7 inches under them. So the only solution would be to cut out the floor drop them 3 1/2" or so (still above the frame rail w/ a 1" BL) and build rocker gaurds around them.
If you were to run two of these you could have 30 gallons for $325.00 or so. if you tied the two tanks together, you would only need one sending unit and that is included in the $325.00. The only problem is how would you fill the tanks?? My other question is do I need to worry about electrolysis between the AL tank and steel mounts and or body?
RCI makes the 2150 which is 20x18x10 and 15 gallons I don't have the stock seats. I have corbeau seats and I have 7 inches under them. So the only solution would be to cut out the floor drop them 3 1/2" or so (still above the frame rail w/ a 1" BL) and build rocker gaurds around them.
If you were to run two of these you could have 30 gallons for $325.00 or so. if you tied the two tanks together, you would only need one sending unit and that is included in the $325.00. The only problem is how would you fill the tanks?? My other question is do I need to worry about electrolysis between the AL tank and steel mounts and or body?