|
buc4x 10-31-2007, 10:45 AM I checked the valves on my 1.3 and all are with in spec, but when freeway driving at a certian rpm they start clacking away as if they are to loose. i'm wondering if its intake or exhaust side that needs to be tighter. anny ideas?? thanks, Jeff scO44 10-31-2007, 11:01 AM just take the 1.3 out and stick a 502 in ya idiot.. stupid newbies..:flipoff2: billjohn 10-31-2007, 06:45 PM How is your oil level? crashnzuk 10-31-2007, 07:55 PM The 1.3 is not the quietest engine on the planet. Travis.. catzuk 11-01-2007, 11:02 AM Are you adjusting them with a warm or cold engine? There are listings for both and they are different! Oil viscosity may be breaking down and getting too thin or your oil pressure isn't good after the engine is warm. Need to check that as your oil pump may be getting tired. buc4x 11-01-2007, 01:22 PM oil level is right where it should be, i did adjust the valves when cold, but they were to spec. jeff | |