|
morpheus 10-19-2001, 01:43 PM i've read varying info before about the torque multiplication of a torque convertor. could anyone give definitive information or point me to some about the ratio of a torque convertor for a T350 ?? thanks... - jack The Rockslut 10-19-2001, 01:45 PM Its roughly considered 2:1 orangefj45 10-19-2001, 08:21 PM i'll second that! somewhere between 2 and 2.5 to 1 from what i've read. <IMG SRC="smilies/bounce2.gif" border="0"> <IMG SRC="smilies/bounce2.gif" border="0"> <IMG SRC="smilies/bounce2.gif" border="0"> Donovan 10-19-2001, 08:33 PM The torque multiplication is around 1.85-2 to 1. I had a hard time finding this info and several calls to almost all the torque converter companies. What I did heard is Hydra-Matic is the only company that as a dyno to check the multiplication. Art Carr is suppose to have a Stator that is around 2.5 to 1 multiplaication and it is a billet brand new one. Some of the early 4L80E had a dual stator in them with a 3 to 1 multiplication in it but I here they made to much heat. | |