I have seen some newcomers to Pirate and they have some nice stuff.

However I would like to point out a couple of things we have been making for quite a while........

Our 3 legged links, THE Frame end bracket of choice......Available in 0, 10, & 22 degrees......The pics make them look small but thats an EVO joint and they are 3/8" thick.....And they are bent so you don't take away any of the strength with welds, a bend is way stronger than a weld.

http://www.ruffstuffspecialties.com/catalog/images/trevors%2022%20degree%20gmc.JPG
http://ruffstuffspecialties.com/gallery/albums/userpics/10001/normal_33leg.jpg

Our antiwrap system, the original......With 2" x .25" Wall for the tube, strength where it takes the most stress.....3/8" main plates & 1/4" side plates.......And they come with the grade 8 bolts too!

http://www.ruffstuffspecialties.com/gallery/albums/userpics/10001/normal_Antiwrap%20in%20use~0.jpg

No other place than Ruffstuff!

Don't skimp on strength ever......

And don't be fooled by the price swappers that show one pprice and when you want the pieces thick enough to last they add a few bucks, pure bait & switch......they might as well sell used cars!

Of the 3 legged links, we have been making these for 18 months now with absolutely no complaint!

http://ruffstuffspecialties.com/gallery/albums/aug13/framebrackett.jpg

That is 3/8" plate and that is an EVO joint, the holes come 9/16 so you can adapt to any joint made thats worth using......:p

tryin to call, mailbox is full:flipoff2:

And we finally got the shop next door today and we moved about 1/2 of the shop next door also today. I usually had the phone in my pocket but had to recharge it twice today and may have missed some calls.

However, from today until Festivus we are open for business 7 days a week from 8am PST until 8pm PST, you can call anyday for 12 hours a day.

Sleep isn't really necessary.....

Pretty much a replica of these but with something added to add additional room for RE style joints. Thats funny, All the can style joints have 1/8" extra room in every bracket made that is 2 5/8" wide, nothing else is needed......they sure are pretty though!

I don't really go in for pretty, I go for strength!

Pretty much a replica of these but with something added to add additional room for RE style joints. Thats funny, All the can style joints have 1/8" extra room in every bracket made that is 2 5/8" wide, nothing else is needed......they sure are pretty though!

I don't really go in for pretty, I go for strength!

When strength counts, don't count on the little stuff, go all out with the big guns!

Something like these..........But, they are not like these!

If you are doing it do it ALL the way with the best!:p

These are not a place where you want a failure.......

When you beat on your rig like most of us don't skimp.......:eek:

ALL of our parts are made to be beat on. Keep a spare tab in your toolbox for when you can't find your hammer:smokin:

These fit EVERY joint made and are so easy to mount you can't go wrong. Lots of companies now make simular brackets, nobody else makes them this tough though! I kind of like it when we are copied, it shows we are doing it right. But, they haven't found a way to improve them yet!:D

http://ruffstuffspecialties.com/gallery/albums/aug13/framebrackett.jpg

Always been available in 0, 10, & 22 degree options, 3/8" thick and ready for ANY joint you want. Also ready for the big rocks! Why build anything less than the best? The geometry of these allows for an extremly balanced footprint without having a concetrated heat affected zone. That "footprint" distributes the load over a larger area.

We have been making these for 2+ years now, at $44 a pair they are a couple of dollars more than the rest but way worth the additional strength.....

Ready to go......

ALL of our parts are made to be beat on. Keep a spare tab in your toolbox for when you can't find your hammer:smokin:

Why go for less?

These are some of our best sellers, they should be on the front page!

Ditto....!

Strength where it counts!

For your build, nothing but the best!

Strength counts.....

Than build it B**A** from the start!

bring these back Dan

You are the third person to ask this month, we are! It will be a few weeks and we are going to change them a tad to be a little bit smaller but overall the same, still 3/8" throughout... :)