I've been dying to release these and it's finally time:D I don't think there is anything out there that compares! This version is designed for full hdraulic steering, they are machined for studs and tapered nuts(We recomend ARP) and also have keyways allowing you the option to have your knuckles machined for extra strength! Tie rod end hole is tapered for Chevy 1 ton TRE but can also be drilled out to .750" for hiems if desired. We have clear zinc plated or gold zinc, you can run them as is or paint right over it but you WILL NOT be getting rusty parts from us!

The best part........the kingpin bushing preload is FULLY ADJUSTABLE without removing the arm from the knuckle! They are also fully greasable and O-ring sealed:grinpimp:

$325 with free shipping to the lower 48!

And now for some pictures....

******

Adjustable with a 1/2" ratchet, no shims:flipoff2:

Those are bling, love the keyways . Just curious, you mentioned they give 48* without binding, how does this compare to competitors arms?

Stupid questions

Are they alum or steel and does that price include machining the knuckles?

Stupid questions

Are they alum or steel and does that price include machining the knuckles?


They are machined from cold rolled steel and machining the knuckles would be another $100 plus shipping. These aren't the cheapest, but that's not what we wanted to make...we wanted to make the best.

The term "You get what you pay for", comes to mind when I see these. I think they are well worth it! They are really nice, but I guess thats what we should expect from Madrooster. :idea:
And best of all they are NOT made in FRIGGIN CHINA or INDIA :flipoff2:...lol But seriously MADE in the U.S.A Should be all we put on our rigs.

riiiiight.....

what is tre hole to kingpin center measurment on these, i would like a set but i need to make sure they will clear. Also, what is the distance from center of tre hole to outer edge, thanks.

top

very nice:smokin:

Very cool, I dig the preload adjustment

Top, christmas is coming soon! Santa wants to bring you a set.....haha.

P.S. Santa takes paypal;)

Arms are in stock ready to ship!

Look nice:grinpimp:

Any chance of a 5th hole for d-bears?

Look nice:grinpimp:

Any chance of a 5th hole for d-bears?

We could do it on the next run, but we talked about it and came to the concensus that the fifth hole is not as good as the key-ways we put in our arms and hopefully our knuckles soon:D Maybe Dedenbear can start keying their knuckles for our arms:flipoff2:

bumpity bump...

I just Got my arms yesterday and I must say these bring the beef. I cant wait to put these on and go flog my junk I got the Gold zinc with the the hole machined to 3/4" for my cromo hiems. thanks again Orlando Team Dp4x4

Any ETA will be for the hydro assist will be available? These are blingin' but I dont rock the full hydro.

Any ETA will be for the hydro assist will be available? These are blingin' but I dont rock the full hydro.

I wish I could say! We are completely swamped in our CNC mill and we don't even have time to run parts that we have made before like d300 clocking rings and 231/d300 adapters not to mention the prototype stuff we have material sitting on the floor for:eek:

New lower price, I want to move some of these!

top

Can I get just a pass side?

We only have matched pairs at this time, we made a few extra thinking that we might scrap one, but we nailed them on the first try:)

I wish I could say! We are completely swamped in our CNC mill and we don't even have time to run parts that we have made before like d300 clocking rings and 231/d300 adapters not to mention the prototype stuff we have material sitting on the floor for:eek:

X 2 on the non full hydro, I could really use 'em with two holes on the passenger side:smokin:

This is a great price for some of the nicest kingpin 60 arms out there! I've got a set going on my next buggy:grinpimp:

Just got my set in the mail! These things are amazing.


Graeme

We have these ready to ship out!

im new to the 60 front ends, so that is why the stupid question. what is difference between the full hydralic arms and regular arms for a tierod and draglink to a steerring box. i would buy a set of these in a heartbeat

the tre arms have \ / tapered holes. heim/hydro arms are l l through.

the tre arms have \ / tapered holes. heim/hydro arms are l l through.

i understand that, but in his post he says he only has full hydro but can taper them for tierods or bore them for heims? thats why i asked, mayby the arms are different in some other way.

The arms we have at the moment are symetrical meaning they only have one hole each for the tie-rod or tie-rods if used with a double ended hydraulic cylinder. No hole for a drag link.....

i would probably run a piggyback setup like what i run on my cruiser right now. large chevy and dodge ends piggybacked. so its safe to say i could run these. i will be purchasing a set very soon . thanks for the info.

Just let me know when you're ready. They are ready to ship:)

Have any plans for a behind the axle setup?

Thanks

Have any plans for a behind the axle setup?

Thanks

If you're running full hydro, you can mount these arms facing backward on the knuckles. We hope to get around to the draglink version with the tie-rod behind the axle version someday...:shaking: Never enough time....

Bullet proof arms for your axle;)

Yup I was looking for a version with the tie rod behind the axle. Let me know when you have some ready!

Plenty still in stock:) Ready to ship.....

Top, still have a few sets on the shelf.....

Are you still doing the 231/300 doubler kits? How much to ship to 30005?

Not really, I have some parts still, but I've lost interest in doing it. Still have high steer arms in stock though;)

whats the length from kingpin to TRE hole?

Will these work without interference with a Hummer H2 wheel (5.5" backspacing)?

Still making these? Do they come with a 5th hole for reid (dedenbear) knuckles. I would like a set. Going full hydro with 3/4" heims