AS SEEN IN CRAWL MAG. and also XTREME 4X4 ON SPIKE CHANNEL!!!
ANY DIAMETER AND THREAD AVAILABLE.
:smokin:
BEST QUALITY AND LOWEST PRICE!!!!

(4) 2'' links threaded for standard johnny joints(1 1/4- 12 shank) 40'' long(right hand one end, left on the other...)

95361

thanks

pm sent
thanks

How much a foot for unthreaded lengths?

tx,pmsent

How much for 4 2'' links approx length 35'' taped for 1 1/4 heims one end left the other right? Thanks in advance.

pm sent, thanks

How much for 4 2'' links approx length 35'' taped for 1 1/4 heims one end left the other right? Thanks in advance.

Same question.

2ea, 36" long, L/R 3/4" tap...To 87506.

Thanks.

--D

Pm's Sent

back 2 THE TOP!

PM sent.

(4) 2" 7075 links 40" long w/ 1 1/4" L&R threads.
Shipped to 37857.

Thanks,
Jesse

pm sent thanks

1 link 53.25 inches long 1.5" diameter tapped 1-18 right and left hand shipped to 33030. Thanks.

1 link 53.25 inches long 1.5" diameter tapped 1-18 right and left hand shipped to 33030. Thanks.

I have a 1-18 rh, but no lh. this is a "special thread", most links require 1-14,
some 1"-12.
are sure about this thread size?
if I can tap- 1 link 1.5x53.25= $145.00 + $25.00 S&H
THANKS

Pretty sure it is 1-18 left and right, they are the evo tres, I will give you a call tomorrow and see what we can work out.

Thanks for the help, I will be eagerly awaiting my link. Brian

pmsent

Please pm quote on 1.5" 7075 (55") drilled and tapped 7/8"x18



Thanks!

pm sent, thanks

Dia.'s In Stock 1.5",1.75", 2"
Any Thread- Rh Lh
Season Openers Are Getting Close!!!!!!!!!!!!!!

(4) 2" 7075 links 40" long w/ 1 1/4" L&R threads.
Shipped to 37857.

Thanks,
Jesse
Same thing please shipped to 78613.
Thanks
-Chris

(2) 2" tapped for 1 1/4- 12 one side right and the other left. 40" long to 94566

are these solid... whats the weight per foot?

Yes they are solid. weight per ft. 2" dia= 3.8 lbs
thanks

THESE LINKS CAN BE CUSTOM ORDERED WITH
ANY ENGRAVING, IE, YOUR SHOP NAME,YOUR NAME, TEAM NAME AND NUMBER, ETC.
ALSO CAN BE ORDERED POLISHED!:grinpimp:
CAN ALSO ADD WRENCH FLATS.

new shipment of 7075

How much for 4 2'' links approx length 33 1/2'' taped for 1 1/4 heims one end left the other right? Shipped to my work address at 76051 in TX

thanks pm sent

ttt

sent you a pm thanks
CRS

pm sent back thanks

4 links 38 1/4 long.
3/4 x 16 lh-rh
polished ,wrench flats
70364

(4) 2" 7075 links 40" long w/ 1 1/4" L&R threads.
Shipped to 37857.

Thanks,
Jesse


Same question
shipped to 84663


Thanks

(4) 2" 7075 links 39.5" long w/ 7/8" L&R threads

Shipped to 95118

sorry for delay, pms sent

pmsent

2 1.75" links, 38" long, R/L threaded for 1" JJs, shipped to 01923 (have a bus. address if is cheaper shipping)

how about a price on non threaded also please

pmsent thanks

2 links, 28" long, tapped for1.25" left and right. shipped to 98632.

Thanks

pmsent

2 2" links 36" long tapped 1.250 - 12 left & right shipped to 25425

thanks pm sent

pmsent thanks

2 each 1 3/4" with 3/4-16 (heim thread)

2 each 2" with 3/4 thread

of course rh and lh thread either end

pmsent

bump to the top

got my new links the other day. Awesome stuff. Thanks guys :smokin:

RCKRATZ, thanks:p

ANY SIZE AND ANY THREAD:smokin:

Ttt

quote for (4) 2" links, tapped for 1 1/4 heim both ends (right and left thread) 44" long
&
(4) 2" links, tapped for 1 1/4 heims both ends 41" long delivered to a business address 77868. Thanks

Pm Sent

(2) 2" 7075 links 40" long w/ 1 1/4" L&R threads
shipped 89706

two


2 inch 40 inch long tapped for a left and right thread using 1 1/4 hiems

85201

pm sent

(2) 40" long drilled and tapped for lh and rh 7/8" heims shipped to 78254 and 78634

looking for a price on 2.5 links tapped for 1 1/4 qa1's left and right with wrench flats.
2 @ 28 3/8's
2 @ 31 inch's
Thanks

thanks, pm sent

2@ 1.5" dia 54" with 7/8"-18
2@ 1.75"dia 38" with 1-1/4"-12
2@ 1.75"dia 36" w/ 1-1/4"-12
4 @ 2.5"dia 46" w 1-1/4"-12 (compare vs 2.25" dia)

All with wrench flats please.

thanks,

pm sent thanks

bump

bump

Hey there looking for x2 at 2 dia 29in long 1 1/4 jonny joints.

Thanks

thanks pm sent

thanks for all the response:D

Price on
Chromoly Teflon Kevlar male rod end.

Thread Size: 3/4-16 / 2 RH & 2 LH

Weld-in Threaded Bung Specs

Thread Size: 3/4-16 / 2 RH & 2 LH

Fits Tube Size: 1" 1/2 OD. x .250 Wall x 1" ID.

and 4 jam nuts

if possible
Thanks

pm sent

ttt

ttt

Hey Stan/Brandon, can I get a price on four 2"x36" tapped for 1 1/ 4 in.-12 for pickup? :D

Stan and the Branik crew are top notch. I am picking up my new set of links in Jellico this weekend!

How comparable in price are these to the traditional steel links?

compared to dom thick wall steel?
30-40% higher, with x2 the strength.

4 - 2" dia x 36" long, tapped LH & RH for 1-1/4 - 12
3 - 1.75" dia x 36" long, tapped LH & RH for 1-1/4 - 12
all with wrench flats
shipped to 77356

thanks!

pm sent!

ttt

price on 4, 2" links 36" long wiht 3/4-16 LH and RH threads each end. Shipped to 27858

thanks, pm sent!

4 2" links 36" long, tapped and drilled, just need a quote shipped to 29693
Whats the standard size people run with these links? 2"....1.5" ?

Price on a 24.500" long 1.500" diameter 7075 link with 3/4 rh threads and 7/8 Lh threads to 89048
Thanks,
Eric

(4) 2" links 4ft long

thanks, kaseym

thanks, PM sent

We have all popular diameters in stock.
can provide any thread.
can provide wrench flats.
can provide custom engraving.
can provide polished.

We have all popular diameters in stock.
can provide any thread.
can provide wrench flats.
can provide custom engraving.
can provide polished.

Can you give me an idea per foot. Using 1 1/4 12tpi taps . Basically the cost breakdown. Trying to decided the 7075 You offer or using .750 wall I sell. Let me know your ideas.

pmsent

pmsent

Thanks Stan ... I don't sell alum so I thought you were best choice for my decision.

Thanks Stan ... I don't sell alum so I thought you were best choice for my decision.

pm sent, dealer inquires welcome.

hi need a price for 2, two inch diameter 36 inch long right and left thread 1 1/4 jonny joint threads. 07834 thanks

pm sent.
how does ours compare?

How much for 4 2'' links approx length 35'' taped for 1 1/4 heims one end left the other right?

Can I get a quote for (3) 2" links, 30" long, threaded for 1.25"x12tpi (1 end RH thread, other end LH thread) shipped to 04254?

Thanks,

Ken

pm sent

(2) 2'' links threaded for standard johnny joints(1 1/4- 12 shank) 40'' long(right hand one end, left on the other...)

Shipped to 20124

pm sent

(4) 2" 7075 links 40" long w/ 1 1/4" L&R threads.
Shipped to 66402

pmsent, thanks

bump

Happy Thanksgiving

2 2" 7075 t-6 links. 1 1/4 right and left hand threads. 33 3/4" long. Shipped to 97223. Thanks

pm sent

Can I get a quote on 2 links 2.0"x36" tapped 1.25" lh & rh and 2 links 1.75"x32" tapped 7/8" lh & rh
Thanks Marty

pm sent
thanks

(2) 42in 1.75 dia with 7/8 heims L&R price please thanks

pmsent

bump

:grinpimp::grinpimp:

Awesome prices !!

I'll be ordering some in January!

can you do steel links? looking for 2"x.5" wall threaded for 1.25 johnny joints LH and RH.

unsure of length right now, just looking for somebody that can do it.

Yes we can. price is about 15% cheaper
(the Alum. is stronger):D & lighter

any link, free engraving of your choice. limited time only

(4) 2" x 40" 7075 tap to 1 1/4 l&r. thanks

thanks pm sent

New shipment of 7075 in stock.
NEW SEASON IS COMING FAST:grinpimp:

DEREK WEST, WEROCK east, and XRRA east, 2008 champion.
adds BRANIK MOTORSPORTS 7075 links for his Run at the
King of the Hammers race for 2009!
thanks Derek!!!

2 links 36
1 link 24
all three threaded 1-1/4 right handed one end left handed on the other end.
shipped to 48809.

2 links 51 inchs 7075 taped for 7/8 - 14 LH and RH

(4) 2'' links 1 1/4- 12 shank 40'' long right hand threads on both ends
7075?

Also can I buy just the 7075 from you. I have access to a lathe and could bore and tap myself if it would save me some coin!

66549

thanks

4 - 2" approx. 38" long tapped for 1 1/4 Ballistic joints on both ends 1 left and one right.

Thanks.

THANKS for the RFQ's! PM's sent.

ttt

2 Rockwell tie rods, 2"x50" threaded left and right 1 1/8" 12 shipped to 37327 and then the same in 1.75" tube. What kind of turn around time if I ordered tomorrow?
Thanks
Tyler

Pmsent
KIM SEARS- adds BRANIK links for KOH
and XRRA East

bump

bump

I would like a quote on 2 links 2" x 28" and 2 links 2" x 29". Threaded 1.25" Right hand for all of them.

Shipped to 38452

pm sent

bump

READY FOR THE 2009 SEASON?
These links are tough!!!!!!!!!!

ttt

Going to be ordering 4 links in a few weeks. Don't know what lengths I need till I get the buggy in my shop though.

Whats your turnaround time once the order is placed?

Thanks,
Chris

can have them done and shipped in under 1 week!
thanks

Got my new links today.

Anyone looking @ a Branik product will be more than pleased. Stan is a top notch vendor & delivers as promised.

Thanks again for the great deal

Jace

Quote please
Steering
Price of solid Chromo 1.5" or so?
I need 47 inch for the Centerlink with TRE's and
25 inch for the Draglink DOM will do.

Quote please
Steering
Price of solid Chromo 1.5" or so?
I need 47 inch for the Centerlink with TRE's and
25 inch for the Draglink DOM will do.

STFU retard. Call Bunk.

YOU STFU
He sent me here WEBWHEELER

YOU STFU
He sent me here WEBWHEELER

Ive wheeled lately...you havent ford boy.:flipoff2:

Ive wheeled lately...you havent ford boy.:flipoff2:

OK
Ya got me there,

That hurt

Pm sent pony-boy.

ttt

1) 1.5" rod 30" long with 7/8-18 right and left. and how much more for custom engraving

pmsent

(3) 2'' links threaded for standard johnny joints(1 1/4- 12 shank) 35'' long

06420

pm sent thanks!

Looking for a ballpark qoute(i know this will just be to give me an idea on cost) since I don't have the exact lengths yet for my build (8) 2" ,all links will most likely be between 40"to 48" length, RH threaded at both ends for 1 1/4" tpi12 joints.
Thanks

two 2"x 42" long with 1.25" threaded ends shipped to 95476

pm's sent thanks

(4) 1.75 x 35 lg.
1-12 thread RH on all ends



edit: 38501

Thanks

pmsent

Ttt

ttt

bump:smokin::smokin::homer:

ttt

price on 2 2'' solid links for 1 1/4-12 johnny joints, one left one right shipped to 80304.

Also do you have some pictures of the links?

oh and about 38'' long

1 link 26" long 7/8-18 threads right and left
1 link 41" long 7/8-18 threads right and left
Both with wrench flats, in whatever diameter you advise (1.25" or 1.5" Id guess) for tie rod and draglink on a toyota trail rig
Shipped to 23442

thanks

-j-rOd

price on 4 links 2" solid, 40" long, tapped 1.25-12 tpi all right handed.

thanks

thanks for the request for quote.
pms sent

4x 2'' links length 35'' taped for 1 1/4 j/j left and right threads to 15956

what about radius arms,similar to ford setup but with tubes in a Y

ttt

For the rfqs

ttt

price for 2 1.25 solid links 12"s long tapped for 7/8th hiems one end left hand one end right hand and wrench flats machined in. shipped to 45833

thanks

ttt

Ian Johnson of Xtreme 4x4 on Spike channel will feature
a set of our links for a new project this week end.
They have been engraved and polished and have
been hex machined on the ends.
GET SOME!!!!! BRANIKMOTORSPORTS:smokin:

What size was he using? 2"? Can I get a clarification on "Just over $100" for his 4' link? What is the actual cost?

Thanks

Ian was using 28,29, and 39" links. avg. cost is $112 to $156
each without polish, hex end and engraving.
the links are priced by the inch
and include the thread of your choice.

Hey guys, a few questions.

I am running 1.75 x .250 DOM lowers that are 33"-rear and 33 3/8" long-front. It is a fairly light weight buggy, and I have NOT bent a lower yet. That includes competing in 7 events last year/this year, a week of pre-running/KOH this year, plus a bunch of trail riding. What would a comparable aluminum link be? If I remember right, Kim Sears is running fairly small links.

Based on the above info, shoot me a quote for 2-33", 2-33 3/8", and 1-17". I have 1" Johnny Joints with left and right thread on each one. Shipping would be to 28314.

Thanks guys!!!


Rob

pmsent

price on 2 2 inch links 40 inches long, tapped for 1.25 heims shipped to 21136 (left and right hand)

Stan i Need a price on 1.25 Hiems picked up in the fort! price on 4, 8, 12, 24 qtys please

thanks

Need price per inch on 2" & 1 3/4" with 1.25 x 12 thread? And when it is time to order how much lag time between order and at my door? zip 25311 Thanks Chris

we need length of links to quote.
pm sent, thank you!

to the top

ttt

I need a price on 4-38" long 2" dia. links 1-1/4 fine RH both ends.

Thanks

pmsent

PM sent.

2" diameter (2) at 60" each with 1" thread (2) at 48" with 1" thread

1.75" diameter (2) at 60" with 1" thread and (2) at 48" with 1" thread

building buggies. If you got shipping ship to gainesville, ga 30501 business address. Got forklift if it comes freight liner

quote on 2 2" (38") links tapped for 7/8" 14tpi. to 84321. thanks

pm"s sent
thanks

:grinpimp:

ttt

ttt

ttt

bump

Quote:

(4) 2" x 38" 7075 links 1.25-12 thread

(4) 1.75" x 38" 7075 links 1.25-12 thread

pm sent

THREAD ENGAGEMENT IS EVERYTHING! Jonny joints
or heim joints, a sloppy fit is reason to fail!
Our links have proper thread engagement!

Can you do 2.5"?
8x 2.5" links 60" long. Tapped for 1.25 left and right with a milled flat spot for a wrench. Shipped to 28270
Thanks

P.S. recomended by good friend Will Carter #52x XRRA and KOH racer.....Your advertiseing and support are working

pm sent!
:eek:WOW, THOSE ARE SOME BIG LINKS!

Quote:

(2) 2" X 37" right / left hand for 1 1/4" Johnny joints.

pmsent

how much a foot for 2"? 36ft?

pmsent

pmsent

Never got it???

sent

Quote please on;

2- 31.5 long by 2-inch OD
2- 33.0 long by 2-inch OD

Thread on both ends (right & left hand threads) to 1.25''- 12 tpi.

Hex on both ends, polish and engraved (Area 51) on all links.

These would be shipped to a bussiness, 94303 thanks.

pmsent, thanks

what is the turn around time on these links, order to delivery?

if the order is HOT! NEXT DAY.if its links cut, sized, drilled and threaded only!
if you need hex end, engraved, or polished can take a couple days
more depending on machine schedule at time of order.
NORMAL NON RUSH ORDERS, typically 1 week lead time.
ALL SIZE MATERIAL IN STOCK!

bump

(2)1.75 X 30" left and right threads
(2)2"x41" left and right threads

1.25" shanks

Without hex ends, how hard is it to muscle the nut?

Shipped to 93722

pmsent

(2) 46" long 2" diam threaded for Johnny Joints 1 1/4 with left and right hand at either end.

Shipped to Prince George BC Canada v2k 1z6.

Thanks.

pmsent

ttt

New Year, New Season coming up.
Get these links on all those new builds!

ttt

Ttt

ok finally reeady to order, I need two 2'' 7075 links at 32'' long with 1 1/4-12 tpi threads one end LH the other RH (ballistic joints). With hex ends. Also what does an unpolished link look like? I can't decide if it is worth the extra coin. shipped to 80304.

pm sent

ttt

just got new shipment nice brite
Alcoa 7075-t651 all USA Aluminum!
BEST QUALITY AND LOWEST PRICE

ttt

pm sent.

thanks, just pm when you know info.
we have plent of stock.

ttt

Can I get a price on 2-1.75"OD threaded for 1.25x12 JJ's on both ends RHthread 33"long, and same for 2"OD.....also shoot me a price on 4 of the RH JJ's. shipping to 76309.

Thanks,
Ricky

thanks pm sent

ttt

How much for 2ea 2'' aluminum links approx length 35'' tapped for 1 1/4, one end left the other right to 74014?

Pm sent thanks

Ttt

ttt

ttt

bump

Price for (2) 2" diamater x 36" threaded for 1.25 heims rh. as well as 1 1.5 32" threaded with 7/8 rh shipped to 85306

thank you

price for 4: 2" diameter, 36" length, threaded for 1.25 Johny Joints shipped to 79714

thanks

2" dia. 34" long, RH one end LH other for 1 1/4" heims to 98321 THANKS

pmsent

ttt

Ttt

to the top

ttt

two 2" 7075 links 40" long w/ 1 1/4" L&R threads. shipped to business 85201 please.

thanks

ttt

ttt

ttt

ttt

ttt

all sizes in stock.

bump

ttt

ready to make yours!!!!!