Well finally finished the doors only got 1 pick tonight camera went dead but here it is cut down, capped, with diamond plate inserts I made to replace the inner panels
http://4play4wheelers.com/Pass1.5dr_IMG.jpg

personally i like no doors at all but they look good all the same.

Looks good, got any pics from the top?:)

Ya Ill get some picks tomorrow when the battery is charged as far as with or without doors I like without also but 1) weather in chicago and surrounding areas I wheel at calls for a little blockin of the wind and 2) we got mud and not to say I dont like it I do at times its the cleanup I hate 3) My 6 year old son is going wheelin with me and I think it would be to his benefit to have it there along with yes hes wearin his Bike helmet like it or not. Love My Kids

Looks good. I went with a lower cut door myself. Mine are capped with 1x3 1/8th tubing. Now the doors are stronger than they were stock and will keep any large rock from coming in if it's laid over.

http://home.attbi.com/~rokzuki/pics/20020608-1.jpg


http://home.attbi.com/~rokzuki/halfdoor.htm

Those I like. I'm doing the same mod. What are ya using for handles and latch mech.? Damn Nice job!:trooper:
Redfive standing by....

If you cut the doors just above the latch Mechanism. Its all good you weld a small rod onto the latch pointing up it is spring loaded
so when pushed down door opens but as soon as you let off it pops backup no key, no handles, required Il post some better picks tonight

Originally posted by M.Martian


http://home.attbi.com/~rokzuki/pics/20020608-1.jpg


http://home.attbi.com/~rokzuki/halfdoor.htm


Doors are kewl... Dog is :rainbow:

:flipoff2: :D :flipoff2: :D

:beer: :beer: (and one more for the :rainbow: dog):beer:

Originally posted by billj



Doors are kewl... Dog is :rainbow:

:flipoff2: :D :flipoff2: :D

:beer: :beer: (and one more for the :rainbow: dog):beer:

The dog is not mine. It's a friend's. It may look :rainbow: but it loves wheeling and camping.

LOL that's funny, MM that's pretty mean not to stick up for your own dog:flipoff2:

I have my half-doors about half finished. I went with a straight cut from the upper hinge to the rear tub line. Look very sweet and clean. The cut line runs about 1/8-inch above the stock inner door latch mechanism, so you can still use it. I spent $85 on a custom made brushed stainless steel cap for mine, but like an idiot I screwed up the measurements and they are 2-inches too short (half of 68 is NOT 32!). I am filling mine with the expandable foam. I will finish them just as soon as I get finished working on everyone else Samurai. Hopefully by SOR

I would like to ask why are you guy's cutting down past the bed line:confused:

Originally posted by Bill4rest
I would like to ask why are you guy's cutting down past the bed line:confused:

I originally had mine up a few inches higher and decided I wanted a little more visibility so I cut it lower. At the rear I should have kept it higher though.

Originally posted by Bill4rest
I would like to ask why are you guy's cutting down past the bed line:confused:

It makes a perfect resting spot for your elbow and forearm:D

really I just like the way it looks over just a straight cut my 02

I would think that lowering it that much would eliminate your knuckles hitting the doors! Seems like a good idea to me!

Originally posted by Hank
I would think that lowering it that much would eliminate your knuckles hitting the doors! Seems like a good idea to me!

I have long ams but I still walk upright

couple more f/k
http://4play4wheelers.com/passinrdr_IMG.jpg

http://4play4wheelers.com/passindrtop105-0538_IMG.jpg

i like the diamond plate inner pannels. :smokin:

Thanx I got a 2x4 sheet from a hardware store going out of buis. for $23.00 went and got more cash to get a second and when I got back it was gone:eek: